• Restorative Dentistry and Endodontics
• /
• 제20권1호
• /
• pp.342-350
• /
• 1995

To determine the factors which affect the flow of dentinal fluid through cat dentinal tubules in vivo, the flow of fluid was measured by observing the movement of the fat droplets of dilute milk in a glass capillary with a microscope connected to the monitor. After measuring the exposed area of dentin, hydraulic conductances of dentin were calculated. The mean pressure which stoped the outward flow of dentinal fluid was 9.5mmHg. The hydraulic conductance of dentin under the condition of pulp exposed was increased by 21 % from that under the condition of dentin exposed. Under the conditions of pulp cut and pulp removed, the hydraulic conductances of dentin were increased by 22 % and 31 % respectively from that under the condition of dentin exposed. These results show that the direction and rate of dentinal fluid flow in cat dentin is affected mainly by the hydrostatic pressure of interstitial fluid of pulp tissue in the state of low compliance. Both of the osmotic effect produced by the protein constituents of interstitial fluid across the odontoblast tell layer and the change of interstitial fluid pressure produced by the state of the microcirculation of the pulp also affect the direction and rate of dentinal fluid in some degree.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.1078-1080
• /
• 2002

The pressure variation of interstitial fluid is one of the most important factors in bone physiology. In order to understand the role of interstitial fluid and the biomechanical interactions between fluid and solid constituents within bone, poroelastic theory was applied. The purpose of this study is to describe the behavior of calf vertebral trabecular bone composed of the porous solid trabeculae and the viscous bone marrow by using a commercial finite element analysis program based on the poroelasticity. In this study, the model was numerically tested for 5 different strain rates, i. e., 0.001, 0.01, 0.1, 1.0, and 10 per second. The material properties of the calf vertebral trabecular bone were utilized from the previous experimental study. Two asymptotic poroelastic response, the drained and undrained deformation, were predicted. From the predicted results for the simulated five strain rate, it was found that the pore pressure generation has a linearly increasing behavior when the strain rate is the highest at 10 per second, other wise it showed a nonlinear the strain rate Increased. Based on the results of the present study, it was suggested that the calf vertebral trabecular bone could be modeled as a porous material and its strain rate dependent material behavior could be predicted.

• 대한두경부종양학회지
• /
• 제16권1호
• /
• pp.9-13
• /
• 2000

Objectives: To determine the tumor interstitial fluid pressure(TIFP) in patients with head and neck cancerand predict radiotherapy outcome.Materials and Methods: In 12 biopsy proven primary head and neck cancer patients with accessible by direct inspection and palpation, and of sufficient thickness(>1cm) to permit accurate needle placement, we measured TIFP at cervical lymph node before and during radiotherapy using a modified wick-in-needle technique. Tumor size was measured clinically and radiologically. Results: The mean preradiotherapy TIFP was 23.4mmHg. Preradiotherapy TIFP had significant relationship with tumor size(p=0.0009). Preradiotherapy TIFP was not different between complete response group and partial or less response group(p=0.114). Radiotherapy outcome was not different between group with above and group with below average TIFP(p=0.09). Conclusion: The mean TIFP was elevated with 23.4mmHg before radiation therapy. Preradiotherapy TIFP had significant relationship with tumor size. It is not definitive that TIFP could be prognostic indicator of radiation response.

• Journal of Mechanical Science and Technology
• /
• 제15권7호
• /
• pp.1032-1040
• /
• 2001

It is widely accepted that the pressure variation of interstitial fluid is one of the most important factors in bone physiology. In order to understand the role of interstitial fluid on porous bony structure, a consideration for the biomechanical interactions between fluid and solid constituents within bone is required. In this study, a poroelastic theory was applied to investigate the elastic behavior of calf vertebral trabecular bone composed of the porous solid trabeculae and the viscous bone marrow. The poroelastic behavior of trabecular bone in a uniaxial stress condition was simulated using a commercial finite difference analysis software (FLAC, Itasca Consulting Group, USA), and tested for 5 different strain rates, i.e., 0.001, 0.01, 0.1, and 10 per second. The material properties of the calf vertebral trabecular bone were utilized from the previous experimental study. Two asymptotic poroelastic responses, the drained and undrained deformations, were predicted. From the predicted results for the simulated five strain rates, it was found that the pore pressure generation has a linearly increasing behavior when the strain rate is the highest at 10 per second, otherwise it showed a nonlinear behavior. The pore pressure generation with respect to the strain was found to be increased as the strain rate increased. The elastic moduli predicted at each strain were 208.3, 212.2, 337.6, 593.1, and 602.2 MPa, respectively. Based on the results of the present study, it was suggested that the calf vertebral trabecular bone could be modeled as a poroelastic material and its strain rate dependent material behavior could be predicted.

• Journal of Chest Surgery
• /
• 제26권6호
• /
• pp.441-451
• /
• 1993

Protective effect of superoxide dismutase[SOD] and substrates on acute ischemic and reperfused myocardium was assessed by cardiac microdialysis. 30 Rabbits were divided into 4 groups; normal control group [group I, n=5], ischemic group [group II, n=5], SOD treated group [group III, n=10], and substrates treated group [group IV, n=10]. After a microdialysis apparatus was implanted in rabbit myocardium, coronary artery was occuluded for 5 minutes and reperfusion was performed for 30 minutes. Hemodynamic changes, CK-MB isoenzyme level and adenine ring compound level in effluent dialysates [equilibrated with interstitial fluid], and ultrastructural changes of myocardial cell were analysed. Systolic blood pressure at 10 and 30 minutes after reperfusion was higher in group III and IV than in group II [p<.05]. Also percent recovery of systolic blood pressure in group III [p<.01] and IV [p<.02] was higher than in group II. CK-MB isoenzyme level in effluent dialysates was peaked at 10 minutes after reperfusion, thereafter decreased in group II, III and IV. At 30 minutes after reperfusion, its level was lower in group III and IV than in group II[p<.05]. Adenine ring compound level in effluent dialysates increased till 10 minutes after reperfusion and progressively decreased. At 10 and 30 minutes after reperfusion, its level was lower in group III and IV than in group II without significance. Degree of myocardial damage was estimated by scoring of mitochondrial injury. Group I was within normal range and most severe injury was seen in group II. And the score of mitochondrial injury in group III and IV was lower than in group II. In conclusion, SOD and substrates[KMP solution] had protective effect on stunned myocardium. The microdialysis appratus was a good device for studying stunned myocardium, and cardiac microdialysis might be a unique technique for analysis of regional intramyocardial interstitial fluid.

• International Journal of Vascular Biomedical Engineering
• /
• 제2권2호
• /
• pp.16-26
• /
• 2004

The object of this study is to develop a mathematical model of the hemodialysis system including the mechanism of solute kinetics, water exchange and also cardiovascular dynamics. The cardiovascular system model used in this study simulates the short-term transient and steady-state hemodynamic responses such as hypotension and disequilibrium syndrome (which are main complications to hemodialysis patients) during hemodialysis. It consists of a 12 lumped-parameter representation of the cardiovascular circulation connected to set-point models of the arterial baroreflexes, a kinetic model (hemodialysis system model) with 3 compartmental body fluids and 2 compartmental solutes. We formulate mathematically this model in terms of an electric analog model. All resistors and most capacitors are assumed to be linear. The control mechanisms are mediated by the information detected from arterial pressoreceptors, and they work on systemic arterial resistance, heart rate, and systemic venous unstressed volume. The hemodialysis model includes the dynamics of urea, creatinine, sodium and potassium in the intracellular and extracellular pools as well as fluid balance equations for the intracellular, interstitial, and plasma volumes. Model parameters are largely based on literature values. We have presented the results on the simulations performed by changing some model parameters with respect to their basal values. In each case, the percentage changes of each compartmental pressure, heart rate (HR), total systemic resistance (TSR), ventricular compliance, zero pressure filling volume and solute concentration profiles are represented during hemodialysis.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1038-1041
• /
• 2004

In this study, developed a micro-level experimental setup to measure pore pressure and poroelastic modulus in various strain and strain rate about a stress in micro-structure of bone tissue. It is essential device in the development of the model to analysis the interstitial bone fluid flow of the lacuno-canalicular system to be known that would effect on the bone remodeling. The constitution of the experimental setup is as follows, microscopic image processing system; actuator control unit; load measurement system. A pilot study was used an artificial chemical wood to have similar poroelastic property of bone matrix and conducted to validate the suitability of the measurement system.

• Near Infrared Analysis
• /
• 제2권1호
• /
• pp.43-53
• /
• 2001

A non-invasive spectroscopic method is presented for the measurement of pulmonary edema. Both early diagnosis and quantitative edema estimates were investigated. The spectroscopic determination of pulmonary edema involved the acquisition of diffuse reflectance spectra in the near-infrared (NIR) region with change in water concentration - water is the main constituent of edema fluid. Pulmonary edema was induced into the excised perfused lungs of seven animals by elevating the hydrostatic pressure. Estimates of edema were ascertained from a partial least squares regression of the measured spectral response. Actual edema was determined from the change (increase) in total lung weight. Estimates in relative lung weight increases due to in vitro edema were made with the near infrared spectra. The results revealed that fluid accumulation produced spectral changes in the O-H and C-H absorptions as well as scattering changes in the spectra. Histology of the lung was used to verify the presence or absence of interstitial and alveolar edema. Results demonstrated that near infrared spectroscopy might provide a new tool for clinical assessment of pulmonary edema.

• 소성∙가공
• /
• 제8권3호
• /
• pp.301-301
• /
• 1999

Austenitic stainless steels such as AISI 316L have been used in equipment in which fluid flows at high speeds which can induce cavitation erosion on metallic surfaces due to the collapse of cavities, where the collapse is caused by the sudden change of local pressure within the liquid. Usually AISI 316L is susceptible to cavitation erosion. This research focuses on developing a better material to replace the AISI 316L used in equipment with high speed fluid flow, such as impellers. The effects of Rare Earth Metal (REM) additions on the cavitation erosion-corrosion resistance of duplex stainless steels were studied using metallographic examination, the potentiodynamic anodic polarization test, the tensile test, the X-ray diffraction test and the ultrasonic cavitation erosion test. The experimental alloys were found to have superior mechanical properties due to interstitial solid solution strengthening, by adding high nitrogen (0,4%), as well as by the refinement of phases and grains induced by fine REM oxides and oxy-sulfides. Corrosion resistance decreases in a gentle gradient as the REM content increases. However, REM containing alloys show superior corrosion resistance compared with that of other commercial alloys (SAF 2507, AISI 316L). Owing to their excellent mechanical properties and corrosion resistance, the alloys containing REM have high cavitation erosion-corrosion resistance.

• 대한의용생체공학회:의공학회지
• /
• 제15권1호
• /
• pp.41-50
• /
• 1994

단세포군항체(monoclonal antibody)를 이용한 항암제치료법이 다각적인 방면으로 실험되고 있으나, 환자에 주입된 단세포군항체중에서 실제의 암전달량은 언제나 기대치에 미치지 못하고 있다. 그러므로, 효과적인 항암제치료와 조기암진단을 위하여 암내부에서의 물질전달에 미치는 인자들의 포괄적인 측정이 필요하였다. 본 실험에서는 면역결핍누드쥐에 이식된 neurobastoma의 물질전달환경을 이해하기 위하여 성장특성과 포도당대사속도(GMR)를 측정하였으며, 세포간체액압력(IFP), 국부혈액속도(BPR)와 pH를 높이 2cm의 암에서 반경방향으로 측정하였다. 성장특성으로써 체적배가시간을, 세포활동성으로써 GMR를 측정하였더니, 각각 8.1일 (SD 0.44일), 23.53 mg/min/100g(SD 3.54 mg/min/100 g)이었다. 암중심 IFP는 암부피가 커짐에 따라 증가하여 높이 3cm의 암에서는 12.3mmHg(SD 2.6mmHg)이 되었다. 반경방향에 따른 IFP, BPR, pH를 특정한 결과, 암중심에 접근할수록 IFP는 증가되었고, 반면에 BPR과 pH는 감소되었다. 이로써 암내부에서의 증가된 IFP, 감소된 BPR과 pH가 단세포군항체와 그 공합체의 내부전달을 저해하는 원인으로 작용할 수 있다는 사실이 제시되었으며, 이들 인자들을 적당한 기술로 조절하여 더 많은 단세포군항체를 암내부로 전달시킬 수 있을 것으로 판단된다.