• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.11
• /
• pp.197-203
• /
• 1999

Increasing demands on precision machining have necessitated the tool to move not only position error as small as possible, but also with smoothly varying feedrates. Because of the lack of accurate and efficient algorithms for generation of 3-dimensional lines and circles, a full accomlishment for available machine tool resolution is generally unavailable. In this paper, a reference-pulse type 3-axis PC_NC milling system is developed for the precision machining of complex shapes in 3-dimensional space. Three AC servomotors are used as the actuator instead of the hand wheel to operate a 3-axis milling machine under the same mechanical structure. A PC is used to handle the control signal calculation for various types of motion command. To achieve the synchronous 3-axis motion, a real-time reference-pulse 3-dimensional linear and circular interpolator based on the intersection criteria is developed in software. The performance test via computer simulation and actual machining have shown that the PC-NC milling system is useful for the machining of arbitrary lines and circles in 3-dimensional space.

• Journal of the Semiconductor & Display Technology
• /
• v.17 no.3
• /
• pp.70-74
• /
• 2018

In typical spectroscopic ellipsometry, the optical and geometrical properties of thin film and nano pattern can be obtained by measuring the polarization state of light reflected/transmitted from the object by rotating a analyzer or a compensator. We proposed a snapshot spectroscopic ellipsometric system based on a modified Michelson interferometer to overcome the time-consuring measurement principle due to rotating part. The proposed system provides spectral ellipsometric parameters (psi, delta) in real time by using a single spectral interference signal generated in the interferometric polarization module. However, it has a long-term stability problem resulting in delta(k) drift. In this paper, it is experimentally proved that the drift problem is caused by anisotropic refractive index change of the beam intersection layer in beam splitter of interferometer.

• International journal of advanced smart convergence
• /
• v.9 no.4
• /
• pp.1-7
• /
• 2020

This study is a study on the development of AEBS test scenarios for traffic accidents in Korea, and was compared and analyzed using the Traffic Accident Analysis Program. To ensure the safety of passengers and pedestrians in traffic accidents, the number of cars equipped with ADAS is increasing rapidly at all car manufacturers in each country. For traffic accidents used in this study, the domestic traffic accident database (ACCC) produced by SAMSONG was used. Domestic traffic accidents differ from overseas traffic accidents in terms of road type, signal system, driver's seat location and number of vehicles. ACCC databases, which supplemented and reinforced these differences, built a database based on the PC-CRASH program. In the study, we analyze the types of accidents to develop comparative scenarios for each type of road and collision type of traffic accidents. When the road types of traffic accidents in Korea were divided into five types and the collision types were divided into six, it was confirmed that the most types of FRONT-SIDE crashes appeared at the intersection. It is expected that the frequency of possible traffic accidents and collision types can be predicted according to the road type in the accident database, we that it can be used as an AEBS test scenario development suitable for the domestic road environment.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.6
• /
• pp.60-75
• /
• 2019

Nowadays, interest in safety of pedestrians who are relatively weak when compared with vehicles increases. Also, concern for pedestrian accidents on crosswalks increases. For these reasons, scrambled crosswalks which are considered to contribute pedestrian safety by reducing conflicts between vehicles and pedestrians are actively discussed and there are also a few intersections where they are actually installed. However, scrambled crosswalks must include all-red phase for all vehicle traffic flows, which inevitably leads to increase of lost time per cycle. Therefore, evaluation in terms of efficiency should be done before installation of scrambled crosswalks. This research suggests installation criteria for scrambled crosswalks so that it is possible to judge whether installation of scrambled crosswalks is appropriate only by surveying vehicle traffic volume and pedestrian traffic volume. This research derives optimum cycle length from signal optimization models which considers both vehicle traffic volume and pedestrian traffic volume. From this optimum cycle length, this research compares total delay time before and after installation of scrambled crosswalks. From an analysis, two research results are derived. Firstly, there is critical traffic volume above which installation of scrambled crosswalks can not efficient. Secondly, appropriate areas for installation of scrambled crosswalks are different by each signal intersection or by each signal system and those difference vary. From these results, this research suggests installation criteria for scrambled crosswalks which consists of two steps. The delay time of the pedestrians may be increased after the diagonal crosswalk is installed, but it may be desirable to install in consideration of the appropriate traffic level to ensure safety.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.2
• /
• pp.21-28
• /
• 2012

The continuous deployment of Urban Traffic Information System (UTIS) in Korea has increased the need for developing more practical applications utilizing the standard functions of UTIS facilities installed on urban arterials beyond its basic applications like gathering traffic data and providing traffic information. The UTIS-based bus signal priority may be one of UTIS-based applications meeting such demands. However, the studies on BSP have not been sufficient for actual field deployment in terms of theories and algorithms so that there have been few actual installations on real urban arterials. Thus, this study was aimed at developing a UTIS-based bus priority signal system and evaluating its effectiveness through a field study. To this end, this study presents the system development processes by dividing the UTIS-based bus priority signal system into hardware and software. In addition, the positive effectiveness of the UTIS-based bus priority signal system was verified through a field application test which was conducted at Gyeonggi Global Trade High School intersection.

• Journal of Korean Society of Transportation
• /
• v.30 no.5
• /
• pp.23-31
• /
• 2012

The objective of this study is to develop the design criteria of traffic island considering pedestrian level of service (LOS). In pursuing the above, this study gives particular emphasis to suggesting the minimum design space of traffic island in order to maintain pedestrian LOS C and D, and the critical pedestrian traffic volume that reflects the intersection geometry (2 lanes per direction) through the simulation analysis. The main results are as follows. First, the spaces of 160 traffic islands, which meet the pedestrian LOS C and D and reflects the pedestrian traffic volume by signal cycle, are drawn by using a commercial simulator VISSIM. The relevant spaces of traffic island in terms of both the pedestrian LOS and the pedestrian traffic volume are evaluated to range from $3.0m^2$ to $41m^2$. Second, the critical pedestrian traffic volume for the operation of traffic island is evaluated to be 1,000-1,300 person/hour at LOS C and 1,600-1,800 person/hour at LOS D, respectively, when a cycle of 120-150 seconds were applied to a intersection with two lanes per direction.

• Journal of Korean Society of Transportation
• /
• v.17 no.1
• /
• pp.131-139
• /
• 1999

The quality of progression at signalized intersection has the largest potential effect. TRANSYT-7F is widely used to estimate the signal progression delay, but the progress of collecting and executing the compute program appears to be rather cumbersome. The research is to develop the analytical and progressing platoon delay model that is as simple as the methodology of HCM and familiar with the output of simulation model. The general approach to this research was conducted to examine the Rouphail and NCHRP 339 methodology together with the existing progression delay model (TRANSYT-7F. HCM). The scope is contained to be applicable only to cycles with no overflow queue and to obtain a comprehensive evaluation of the effects of changes in the quality of traffic signal progression on stopped delay and to be analyzed a simple mathematical method. The principle assumption for this model is that secondary flows is dispersed and partly mixed with average flow of the primary progressed flow. A second assumption is that through flow is consisted with the part of saturation flow at the front of it and the part of average flow at the rear of it. The delay equations vary for two arrival. The conclusion of this study could be summarized as 1)The evaluation of this model was consistently similar to that of TRANSYT-7F, 2) Platoon pattern has the real traffic flow characteristics. 3) The computing process of progression delay is made to have simple logic and easy calculation by integration, 4) This model could be estimated to be applied in almost all case.

• Journal of Korean Society of Transportation
• /
• v.32 no.6
• /
• pp.579-588
• /
• 2014

In this study, three signal control strategies such as Bike box, Hook-turn, and 6-phase were assessed for various traffic conditions at signalized intersections incorporating bicycle left-turn traffic. Results showed that the size of a waiting zone mainly affected the performance of signal control in both Bike box and Hook-turn. Both Bike box and Hook-turn yielded an identical vehicle delay, but Bike box produced less bicycle delay than Hook-turn by 2.5~29.9 sec/veh for undersaturated traffic conditions. For saturated traffic condition, Bike box produced less vehicle delay than Hook-turn and 6-phase strategies, but bicycle delay was found to increase at the 700 vph of bicycle traffic compared to 6-phase. Bicycle delay was greatly increased under Hook-turn and Bike box strategies when bicycle traffic was greater than 300 vph and 500 vph, respectively. It was also shown that bicycle delay could be significantly reduced by providing appropriate size of queueing space. In addition, Bike box was likely to yield less vehicle and bicycle delay than Hook-turn for traffic volume patterns investigated in this study.

• Journal of Korean Society of Transportation
• /
• v.29 no.5
• /
• pp.157-167
• /
• 2011

Many problems, such as unexpected delay and collision with pedestrians or vehicles, occur generally at signalized intersections where bicycle users are frequently involved. These problems have hindered bicycle users from riding bicycles on urban highways. The aim of this study is to suggest proper traffic signal operation methods for safe and convenient highway crossing of bicycles. Three types of crossing methods at signalized intersections are proposed and analyzed: (1) indirect left turn, (2) direct left turn on an exclusive bicycle lane, and (3) direct left turn on a bicycle box. The VISSIM simulation tests were conducted based on fifty-four operation scenarios prepared by varying vehicle and bicycle traffic volumes. Both delay and the number of stops are used as the measures of effectiveness in the analysis. The results from the three-legged signalized intersections suggested that (1) the indirect left turn is appropriate when vehicle demand is high while bicycle demand is not, (2) direct left turn on an exclusive bicycle lane is appropriate when both vehicle and bicycle demands are high, and (3) direct left turn on a bicycle box is appropriate when both vehicle and bicycle demands are light.

• Journal of Korean Society of Transportation
• /
• v.33 no.4
• /
• pp.337-347
• /
• 2015

Since the application of roundabouts by 2010 have been started, more than 350 roundabouts were installed in Korea. Recently the types of constructed roundabouts become various, and the intersection conditions for installing roundabouts were also various. However, there were some difficulties to install roundabouts around school zone due to safety problems. In this study, appropriate distance from adjacent signal crosswalks to roundabouts were estimated for securing pedestrian safety and operation efficiency around school zone. With the analyses, the minimum distance standard was suggested to obtain operational effectiveness of roundabout according to traffic volume, traffic flow, pedestrian green time and secures pedestrian safety and convenience. In this paper, average delay of roundabout as various length of distances between an adjacent crosswalk and a roundabout as different pedestrian signal times, traffic volumes, traffic flow rates were analyzed. Through this study, it was found that about four times of delay in a roundabout was generated if there was adjacent signal crosswalk. However if there is enough distance between an adjacent crosswalk and a roundabout, the value of increasing delay on roundabouts with adjacent a signalized crosswalk can be considerably reduced. Critical value of the distance between a roundabout and a signal crosswalk in case of roundabouts within 200-500 vehicle/hour/lane entry traffic flow, 20-40% of left turn traffic, and over 15 seconds pedestrian green time was about 50 meters. In conclusion, if there is minimum 40 meter distance from roundabouts, adjacent signal crosswalks can be installed and operated for students' safety around school zone.