• Korean Journal of Computational Design and Engineering
• /
• v.9 no.4
• /
• pp.406-415
• /
• 2004

The industrial environment for shipbuilding in 21st century requires increase in few type of ships and marine structures, international cooperation and globalization, while virtual enterprise environment is rapidly establishing. On the other hand, more and more efforts will be spent on internet based distributed and collaborative environment rather than being spent on unit level automations such as CAD, CAM and CAE, and the link between them. Recent internet technology and information technology in heterogeneous environment are being applied in shipbuilding industry as well as in other industries. While these technology are rapidly adopted in major shipyards, many small and medium-sized shipyards does not have enough resources to introduce system designed for large enterprise. In this paper, a prototype of Internet technology based basic planning system is implemented for the small and medium sized shipyards based on the internet technology and concurrent engineering concept. First, the system is designed from the user requirements. Then standardized development environment and tools are selected. These tools are used for defining and evaluating core application technologies for the system development. This can guarantee the survival of small and medium-sized shipyards in 21st century industrial environment.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.4
• /
• pp.105-113
• /
• 2010

In this paper, a 1.485 Gbps video signal transmission system using the carrier frequency of 240 GHz band was designed and simulated. The sub-harmonic mixer based on Schottky barrier diode was simulated in the transmitter and receiver. Both of heterodyne and direct detection receivers were simulated for each performance analysis. The ASK modulation was used in the transmitter and the envelop detection method was used in the receiver. The transmitter simulation results showed that the RF output power was -11.4 dBm($73{\mu}W$), when the IF input power was -3 dBm(0.5 mW) at the LO power of 7 dBm(5 mW) in sub-harmonic mixer, which corresponds to SSB(Single Side Band) conversion loss of 8.4 dB. This value is similar to the conversion loss of 8.0 dB(SSB) of VDI's commercial model WR3.4SHM(220~325 GHz) at 240 GHz. The combined transmitter and receiver simulation results showed that the recovered signal waveforms were in good agreement to the transmitted 1.485 Gbps NRZ signal.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.99-100
• /
• 2013

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.6
• /
• pp.273-278
• /
• 2012

Wired communication signals that are generated in a wheelchair and using GPS to gather speed in this study. And occupants in the helmet, and save your current location information in a wheelchair and speed information that is passed by smartphone to take advantage of the Black Box App and radio feature multi-Communications App S/W development.The results of this study can be utilized effectively a pseudo-real-time information can be shared in each other's wheelchair with many people moving. Limitations of the study at the Institute of Experimental concrete measures for the commercial approach to the development of operational models as required.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1996.06a
• /
• pp.113-118
• /
• 1996

본 논문에서는 소프트웨어 기반의 두가지 다른 코덱 시스템을 연구한다. 하나는 ITU H.263에 기반한 고정된 구조를 갖는 프레임 단위의 비디오 코덱이고, 다른 하나는 현재 진행중이고 1998년에 완성될 ISO MPEG-4 표준안에 기초하여 재배열이 가능한 유연한 구조를 갖는 오브젝트 단위의 비디오 코덱이다. 이러한 비디오 코덱들의 인트라, 인터넷 환경에서 소프트웨어에 기반한 실시간 및 유연한 구조의 구현 가능성을 알아보기 위하여 이들의 실험적인 구현을 시도한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.7
• /
• pp.1347-1353
• /
• 2015

We implemented a 10 Gb/s 4-channel vertical cavity surface emission lasers (VCSEL) driver array in a $0.13{\mu}m$ CMOS process technology. To enhance high current resolution, power dissipation, and chip space area, digital APC/AMC with time division sensing technology is primarily adopted. The measured -3 dB frequency bandwidth is 9.2 GHz; the small signal gain is 10.5 dB; the current resolution is 0.01 mA/step, suitable for the wavelength operation up to 10 Gb/s over a wide temperature range. The proposed APC and AMC demonstrate 5 to 20 mA of bias current control and 5 to 20 mA of modulation current control. The whole chip consumes 371 mW of low power under the maximum modulation and bias currents. The active chip size is $3.71{\times}1.3mm^2$.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2003.09a
• /
• pp.296-299
• /
• 2003

This paper presents the implementation of an integrated messaging gateway (IMG) based on the open services gateway initiative (OSGi) specification to deliver home messages between home and some telecommunication devices. The IMG has four service agents to support a diverse communication channel. In this paper, we describe a software architecture for a seamless messaging and device layouts in the IMG. And then, we detail each components allowing users to be notified automatically through a cellular phone, a telephone, and the Internet.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.64-67
• /
• 2005

A vibration monitoring system for a small size wind turbine (WIT) is established and operated. The monitoring system consists of monolithic integrated chip accelerometer for vibration monitoring, anemometers for wind data acquisition and auxiliary sensors for atmospheric data. Using the monitoring system, vibration response of a 6kW stand alone WIT generator is investigated. Acceleration data of the WIT tower under various operation condition is acquired in real time using LabVIEW and the data are remotely transferred from the test site to the laboratory in school by internet. Vibration response characteristics of the tower structure are diagnosed in the aspect of stability of W/T. Wind data and electrical power performance are also investigated with the stability problem.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.613-614
• /
• 2008

A content recommendation according to users preferences comes up in the Internet application due to contents overwhelming. This paper newly proposes a method to predict contents preference using tags in conjunction with Content-Based Filtering. By implementing this method, this paper cleans up the contents sparsity problem in Content-Based Filtering, and shows the outstanding improvements.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1997.06a
• /
• pp.37-42
• /
• 1997

This paper describes two different S/W-based video codec systems. One is a frame-based video codec with fixed structure based on ITU H.263 standard and the other an object-based video codec with flexible architecture based on ISO MPEG-4 standard currently under specification and planned to be finalized in 1998. These codes are an experimental implementations for examining the feasibility of real-time and/or flexible S/W-based video codecs operating in intra and/or internetworking environments.