• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1995.04a
• /
• pp.59-64
• /
• 1995

The impediment in enhancing the ship safety and combating vessel-source marine pollution depends on the combination of the immediate and mediate factors. The former is mainly caused by human errors and failure in compliance with the international convention standards in operation of compliance with the international convention standards in operation of vessel. The latter by the attitudes and activities of some of the flay states taking little responsibilities with appropriate seriousness in policing their fleets due to the lack of implementing capability of adminstrations. So long as there exists a large size of variation in implementing capability of administration between flag states a globally remarked progress cannot expect to be made in assuring the ship safety and preventing the vessel-source pollution Therefore a new regulatory regime is suggested to be adopted by IMO to maintain high standard flag state adminstrations by recommending standard paradigm to member states so that the development of a implementing culture is encouraged and supported.

• Applied Chemistry for Engineering
• /
• v.31 no.6
• /
• pp.596-602
• /
• 2020

Blending process of adhesive production has a cooling process to cool down the temperature of the solution which was heated up to 76 ℃ with a mineral insulated (MI) cable by 30 ℃ at room temperature. Using a MI cable in the adhesive production process makes the production inefficient because it takes about 10 h for the cooling process. If a jacketed vessel is used instead of the MI cable, it would shorten the cooling downtime without any additional cooling system by using cold water. However, there are various types of jacketed vessels, and thus the most suitable type should be found before set up. In this study, we designed the optimized jacketed vessel for the adhesive production process by calculating the cooling downtime, which impacts production efficiency, as a function of the jacket types using computational fluid dynamics. As a result, the cooling performance of the plain jacket was 32.7% superior to that of the half-pipe coil jacket with the same height. In addition, the plain jacket with 60% spiral baffle reduced the cooling downtime and operating time by 80.4% and 25.1%, respectively.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.6
• /
• pp.495-503
• /
• 2019

Approximately 90,000 ships are registered in South Korea, and about 80,000 of these ships are used in domestic shipping. Among these, 84% are small ships, such as a fishing vessels that weigh less than 20 tons and are made mostly of an FRP (Fiber Reinforced Plastics). When this fact is taken into account, the greenhouse gas emissions that are released per ton of a composite vessel are sizeable. In this study, the laminated structures of an FRP fishing vessel, many of which currently are being built in Korea, were analyzed by ISO (International Organization for Standardization) and international design rules, and the structures of the hulls are lightweight with optimum glass fiber mass content as determined by the laminate weight minimization algorithm. As a result, it was confirmed that the laminations of the vessels in accordance with the Korean rule could have 6.4% to approximately 11% more design margin compared to the requirements of ISO and other international rules. And the case study of the application of the laminate weight minimization algorithm showed the possibility of reducing the weight of the hull bottom plating by as much as about 19.32% and by as much as about 18.06% in the overall structure.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.05a
• /
• pp.145-147
• /
• 2007

Fluorescent induction lamps are assembly of a Low Pressure Mercury discharge vessel and an inductive power coupler. A vessel containing at least a Low Pressure Mercury vapor, which will be energized by means of the Inductive Coupler. The Ultra Violet radiation from the resulting discharge is converted by a layer of fluorescent material into visible light. The discharge vessel may have means of mechanical fixation to position it to the Inductive power coupler. The component to transform High Frequency electrical energy, by means of induction, in order to energize the Low Pressure Mercury in the discharge vessel. The component includes electrical connection. Fluorescent induction lamps don't have international standards yet. So we try to correspond Korea standards to international standards.

• Journal of Ocean Engineering and Technology
• /
• v.27 no.1
• /
• pp.51-58
• /
• 2013

Recently, there has been an increase in the demand for natural gas as a source of clean energy, which has increased the demand for LNG carriers. However, LNG carriers require a capital investment to obtain equipment for the regasification process, which prevents fires and explosions. Thus, on account of NIMBY, a CNG carrier is suggested that eliminates the need for regasification equipment. Meanwhile, carbon dioxide emissions are more and more regulated by international conventions such as the Kyoto Protocol. Because of this, $CO_2$ carriers have also received international attention as a methodology to transport and store $CO_2$ cargoes. Several vessels or tanks to transport and store $CO_2$ gas have been studied in various countries. This paper proposes a conceptual design for a 20ft container shaped tank to effectively transport small cargoes of $CO_2$ and CNG. The proposed pressure vessel or tank will be carried by a conventional containership or special cargo ship. The influences of the design parameters for proposed pressure vessel or tank. Including the materials, scantlings, and shape of the pressure vessel, are studied theoretically and computationally.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.6
• /
• pp.603-608
• /
• 2014

In the maritime traffic environment, the near-miss between vessels is the situation approaching on collision course but collision accident is not occurred. In this study, in order to calculate the near-miss between navigating vessels, the discriminating equation using ship bumper theory and vessel position clustering methods are proposed. Applying proposed module to the vessel trajectories of the WANDO waterway, we assessment navigational risk factors of vessel type, navigational speed, meeting situation.

• International Journal of Contents
• /
• v.2 no.3
• /
• pp.27-32
• /
• 2006

We present an effective algorithm for automatic tracing of retinal vessel structure and vascular landmark extraction of bifurcations and ending points. In this paper we deal with vascular patterns from RGB images for personal identification. Vessel tracing algorithms are of interest in a variety of biometric and medical application such as personal identification, biometrics, and ophthalmic disorders like vessel change detection. However eye surface vasculature tracing in RGB images has many problems which are subject to improper illumination, glare, fade-out, shadow and artifacts arising from reflection, refraction, and dispersion. The proposed algorithm on vascular tracing employs multi-stage processing of ten-layers as followings: Image Acquisition, Image Enhancement by gray scale retinal image enhancement, reducing background artifact and illuminations and removing interlacing minute characteristics of vessels, Vascular Structure Extraction by connecting broken vessels, extracting vascular structure using eight directional information, and extracting retinal vascular structure, and Vascular Landmark Extraction by extracting bifurcations and ending points. The results of automatic retinal vessel extraction using jive different thresholds applied 34 eye images are presented. The results of vasculature tracing algorithm shows that the suggested algorithm can obtain not only robust and accurate vessel tracing but also vascular landmarks according to thresholds.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.6 no.2
• /
• pp.496-506
• /
• 2014

In this paper the scenario based optimization of the bulbous bow of the KRISO Container Ship (KCS) is presented. The optimization of the parametrically modeled vessel is based on a statistically developed operational profile generated from noon-to-noon reports of a comparable 3600 TEU container vessel and specific development functions representing the growth of global economy during the vessels service time. In order to consider uncertainties, statistical fluctuations are added. An analysis of these data lead to a number of most probable upcoming operating conditions (OC) the vessel will stay in the future. According to their respective likeliness an objective function for the evaluation of the optimal design variant of the vessel is derived and implemented within the parametrical optimization workbench FRIENDSHIP Framework. In the following this evaluation is done with respect to vessel's calculated effective power based on the usage of potential flow code. The evaluation shows, that the usage of scenarios within the optimization process has a strong influence on the hull form.

• International Journal of Control, Automation, and Systems
• /
• v.4 no.5
• /
• pp.660-667
• /
• 2006

This paper presents a novel region-based snake method for vessel segmentation. According to geometric shape analysis of the vessel structure with different scale, an efficient statistical estimation of vessel branches is introduced into the energy objective function, which applies not only the vessel intensity information, but also geometric information of line-like structure in the image. The defined energy function is minimized using the gradient descent method and a new region-based speed function is obtained, which is more accurate to the vessel structure and not sensitive to the initial condition. The narrow band algorithm in the level set framework implements the proposed method, the solution of which is steady. The segmentation experiments are shown on several images. Compared with other geometric active contour models, the proposed method is more efficient and robust.

• Journal of Navigation and Port Research
• /
• v.37 no.4
• /
• pp.337-343
• /
• 2013

To ensure the safety for vessels anchored in stormy weather, duty officer and VTS operator have to frequently check whether their anchors are dragging. To judge dragging of the anchored vessel, it is important for VTS operator to recognize the turning circle and its center of the anchored vessel. The judgement for the anchored vessel dragging can be made by using Radar and AIS. If it is available, CCTV or eye-sighting can be used to know the center of turing circle. However, the VTS system collects individual ship's dynamic information from AIS and ARPA radar and monitors of the anchored vessels, it is difficult for VTS operator not only to get the detailed status information of the vessels, but also to know the center of turning circle. In this study, we propose an efficient algorithm to estimate the center of turning circle of anchored vessel by using the ship's heading and position data, which were from AIS. To verify the effectiveness of the proposed algorithm, the experimental study was made for the anchored vessel under real environments.