• Journal of Environmental Science International
• /
• v.26 no.1
• /
• pp.109-118
• /
• 2017

This study was conducted to investigate the effects of intermittent plasma and electrolysis treatments on lettuce (Lactuca sativa var. oak-leaf.), nutrient solution components ($NO_3{^-}-N$, $NH_4{^+}-N$, $PO{_4}^{3-}-P$, $K^+$, $Ca^{2+}$ and $Mg^{2+}$) and environmental parameters (electrical conductivity, total dissolved solids and pH). The recirculating hydroponic cultivation system consisted of planting port, LED lamp, water reservoir and circulating pump. Nutrient solution was circulated in the following order: reservoir ${\rightarrow}$ filtration-plasma or filtration-electrolysis ${\rightarrow}$ planting port ${\rightarrow}$ reservoir. The results showed that nutrient solution components and environmental parameters were changed by plasma or electrolysis treatment. Lettuce growth was not affected by the intermittent plasma or electrolysis treatment with 30 minutes or 90 minutes, respectively. The roots of the lettuce was damaged by excessive plasma and electrolysis treatment. Electrolysis treatment had greater effect on than plasma treatment because of the accumulation of high levels of TRO (Total Residual Oxidants).

• Journal of Navigation and Port Research
• /
• v.34 no.2
• /
• pp.145-152
• /
• 2010

The management of safety at sea is based on a set of internationally accepted regulations and codes, governing or guiding the design and operation of ships. The regulations most directly concerned with human safety and protection of the environment are, in general, agreed internationally through the International Maritime Organization(IMO). IMO has continuously dealt with safety problems and, recognized that the human element is a key factor in both safety and pollution prevention issues(IMO, 2010). This paper proposes a human error analysis methodology which is based on the human error taxonomy and theories (SHELL model, GEMS model and etc.) that were discussed in the IMO guidelines for the investigation of human factors in marine casualties and incidents. In this paper, a cognitive process model, a human error analysis technique and a marine accident causal chains focused on human factors are discussed, and towing vessel collision accidents are analyzed as a case study in order to examine the applicability of the human error analysis technique to marine accidents. Also human errors related to those towing vessel collision accidents and their underlying factors are discussed in detail.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.10a
• /
• pp.165-166
• /
• 2015

Due to the international economic downturn and the increasing competition, container terminals have been trying to achieve cost effectiveness and high service levels. Shipping companies want to get better services from container terminals but container terminals only have limited space and equipment. Frequently, too many external trucks come to the terminal at the same time, and create bottle necks at the terminals. Ouside the container terminals traffic jams occur as well. As a result, stakeholders need a vehicle booking system. By VBS, container terminals can plan efficiently in advance to avoid work delay and the truck drivers can finish their jobs quickly. This paper aims to search efficient models for the container terminals by using VBS.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2014.10a
• /
• pp.167-168
• /
• 2014

It is difficult to expect the service improvements such as increased number of sailing and making new ship due to financial difficulty this is caused by deterioration of island dwellers. In addition, the safety of ship operation is also a problem with the supply of good sailors difficult problem of low wages and lack of safety working environment. T It is necessary to ensure the introduction of public operating system in coastal passenger shipping business to secure the public and safety. There are many practical constraints but if we obtain public sea ways, it will be possible to improve the operating system through the implementation from a subsidized line and taking off business licenses of an insolvent enterprise by enhancing safety control.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.16 no.4
• /
• pp.124-129
• /
• 2008

Design practice has been made on an oil-less scroll air compressor as an air supply device for a 2 kW fuel cell system where air pressure of 2 bar and flow rate of 120 liter/min are required. Basic structure of the scroll compressor includes double-sided scroll wrap for the orbiting scroll driven by two crankshafts connected to each other by a timing belt. These features can eliminate thrust surface which otherwise would produce frictional heat and jeopardize reliable operation of the orbiting scroll and the scroll element's deformation as well. This study focuses on optimum scroll wrap design; orbiting radius has been chosen as an independent design parameter. As the orbiting radius changes, scroll sizes such as scroll base plate and discharge port diameters change accordingly. Gas compression-related losses and mechanical loss also change with the orbiting radius. With a scroll base plate diameter of 120mm at most and discharge port of at least 10mm, the orbiting radius should be within the range of 2.5-4.0mm. With this range of the orbiting radius, it was estimated by performance analysis that the compressor efficiency reached to a maximum of ${\eta}_c$=96% at the orbiting radius of $r_s$=3.5mm for the scroll wrap height-to-thickness ratio of h/t=5.

• International Journal of Internet, Broadcasting and Communication
• /
• v.7 no.1
• /
• pp.1-5
• /
• 2015

In this study, we consider the transportation problem in port container terminals. It aims to determine positions in yards to place the containers at the adequate times. The containers on ship must be unloaded one by one from top to bottom, and placed in the main yard in order to reduce additional cost required for unnecessary unloading when getting out by customer with given timetable. The cost for transportation at container terminals could be reduced by a new approach in scheduling: move the containers from ship and stack them onto main yard that minimizes cost of yard crane operation when unloading for customer.

• Journal of Navigation and Port Research
• /
• v.48 no.2
• /
• pp.97-103
• /
• 2024

As there is growing concern about the environmental impact of greenhouse gas emissions from ships, the International Maritime Organization (IMO) has introduced several regulations targeting reductions in carbon dioxide emissions of 50% by 2050. This study pays particular attention to the carbon intensity indicator (CII) and investigates the impact of slow steaming, one of the short-term measures in the regulation, on containership operations. To this end, a dataset of 8 containerships with various ages and sizes was collected. Based on operation data in 2021, the CII ratings of the containerships were estimated in the business-as-usual scenario for the 2023-2030 period. Then, the speed reductions required to keep the minimum CII rating were calculated for individual containerships. Finally, working day losses resulting from the speed reductions were calculated. The findings in this study were threefold. First, it was found that containerships will undergo degradation in the CII rating every 3 or 4 years without slow steaming. Second, a speed reduction of 2 knots between 2023 and 2030 is required to keep the minimum CII rating. Finally, speed reductions result in the loss of as many as 6 or 7 working days per year.

• Journal of Navigation and Port Research
• /
• v.45 no.3
• /
• pp.138-147
• /
• 2021

The need for analysis of the operational efficiency and productivity of the Busan Port Container Terminal is increasing because of the Hanjin Shipping's bankruptcy and the re-establishment of the Maritime Alliance. This paper analyzes the efficiency and productivity of five Busan New Port Container Terminal companies by using the DEA analysis and Malmquist productivity index model based on the port construction disclosure data and the collected terminal internal data. According to the analysis, the average efficiency of the five container terminals increased in 2018 but declined slightly in 2019, and the Malmquist index showed that all terminals except A have advanced productivity. Additionally, relative to facility productivity, operators at the North Container Terminal had higher facility productivity than operators at the Busan New Port Nam Container Terminal, and regarding capital productivity, the D terminal ported by HMM, a national shipping company, was the highest in facility productivity. Regarding labor productivity, the C terminal showed the highest productivity, and regarding ship work productivity, the A terminal showed the highest productivity.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.05a
• /
• pp.121-122
• /
• 2023

As containerized maritime transport began in earnest, the size of container ships has steadily increased, and recently, the operation of 24,000 TEU-class vessels has become regular. However, concerns about the efficiency and productivity of such mega container ships from a port operational perspective have continued to be raised. The 10^th Busan International Port Conference requested an in-depth study on the trends of container ship enlargement by analyzing the order status of ultra-large container ships from major global liners. Generally, the factor that drives the upsizing of ships is the realization of economies of scale that lowers transportation costs per TEU, which leads to a higher level of cost reduction per unit transportation compared to the increase in fuel consumption due to transporting large amounts of cargo with a single ship. However, it is necessary to examine whether this trend of container vessel enlargement is feasible for port operations. To this end, this study compares and analyzes the productivity and efficeiency of different ship sizes to evaluate the effect of ship size on port operations.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.11a
• /
• pp.72-73
• /
• 2023

As containerized maritime transport began in earnest, the size of container ships has steadily increased, and recently, the operation of 24,000 TEU-class vessels has become regular. However, concerns about the efficiency and productivity of such mega container ships from a port operational perspective have continued to be raised. The 10th Busan International Port Conference requested an in-depth study on the trends of container ship enlargement by analyzing the order status of ultra-large container ships from major global liners. Generally, the factor that drives the upsizing of ships is the realization of economies of scale that lowers transportation costs per TEU, which leads to a higher level of cost reduction per unit transportation compared to the increase in fuel consumption due to transporting large amounts of cargo with a single ship. However, it is necessary to examine whether this trend of container vessel enlargement is feasible for port operations. To this end, this study compares and analyzes the productivity and efficeiency of different ship sizes to evaluate the effect of ship size on port operations.