• International Journal of Precision Engineering and Manufacturing
• /
• v.8 no.1
• /
• pp.32-37
• /
• 2007

The outer diameter finishing grinding process required for ferrules, which are widely used as fiber optic connectors, is carried out by high-precision centerless grinding machines. In this study, the thermal characteristics of such a machine, for example, the temperature distribution, temperature rise, and thermal deformation, were estimated based on a virtual prototype and the heat generation rates of heat sources related to normal operating conditions. The prototype consisted of a concrete-filled bed. hydrostatic grinding wheel (GW) and regulating wheel (RW) spindle systems, a hydrostatic RW feed mechanism, a RW swivel mechanism, and on-machine GW and RW dressers. The reliability of the predicted results was demonstrated using temperature characteristics measured from a physical prototype. The predicted and measured results indicated that this particular high-precision centerless grinding machine had very stable thermal characteristics.

• Journal of Environmental Science International
• /
• v.6 no.3
• /
• pp.239-247
• /
• 1997

The numerical experiments using a particle tracking model have been performed for predicting the change of water Quality and shoreline. In present study, comparison of the numerical model results with the analytic solution shows that the point of the mainmum concentration and the distribution pattern is very similar. The reflection effect from the boundary was newly Introduced for making clear the effect of the closed boundary which set limits to application of a particle tracking model. The present model seems to reappear physical phenomenon well. This model shows well qualitative appearance of pollutant diffusion in Kwangan beach. Therefore, this model is regarded as a useful means for predicting diffusion movement of suspended sand, and change of water quality.

• Journal of Navigation and Port Research
• /
• v.30 no.7
• /
• pp.591-598
• /
• 2006

Port development has been remarkably increasing due to the progress of industrialization in ASEAN area. Especially, Vietnam has increased the international physical distribution in this area rapidly. The main issues facing decision makers at container terminals in Vietnam are how to expand the existing container terminals and construct new container terminals. In this paper, we performed the basic design based on simulation analysis in order to support the expansion of Quy Nhon port in Vietnam as a case study. The preliminary capacity analysis was conducted on the one berth at the port to analyze the scale of C/C(Container Crane)and yard area. Alternative scenarios were created based on the preliminary capacity analysis and the detailed simulation analysis was conducted for supporting the scenarios.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.10a
• /
• pp.193-202
• /
• 2006

Port development is remarkable increased due to the progress of industrialization in ASEAN area. Especially, Vietnam has increased the international physical distribution in this area rapidly. The main issues facing decision makers at container terminals in Vietnam are how to expand the existing container terminals and construct new container terminals. In this paper, we performed the basic design based on simulation analysis in order to support the expansion of Quy Nhon port in Vietnam as a case study. The preliminary capacity analysis was conducted on the one berth at the port to analyze the scale of C/C and yard area. Alternative scenarios were created based on the preliminary capacity analysis and the detailed simulation analysis was conducted fur the scenarios. And in order to establish the marketing strategy, we classified the marketing elements by industrial environment and performed SWAT analysis of the port.

• The Journal of Economics, Marketing and Management
• /
• v.6 no.2
• /
• pp.29-33
• /
• 2018

Purpose - This study aims to offer the suggestions for the researches and policies that could be used as important data to effectuate future FTA. The objective of this study is to suggest a direction of Korea that can form a new logistics hub in Northeast Asia. Research design, data, and methodology - This study was conducted in parallel with literature review and empirical studies for the analysis. 180 valid samples were collected from Korean consumers', and qualitative analysis was employed on the satisfaction level of imported goods welfare of Korean consumers. Results - It is expected that Korea and China would experience increased opportunity factors in this area with the growth of economic sphere in Northeast Asian. If existing problems are solved by utilizing regional environment efficiently together, the hub function of Northeast Asia logistics will be advanced. Conclusions - Korea is introducing and operating special economic zones that provide the exception and support for foreign investment. Therefore, it is necessary to monitor the prices of imported goods, so that the exporters can adjust the prices and obtain the unjust profit equivalent to the tariff reduction by grasping the overseas market trends of the imported product prices.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.8 no.1
• /
• pp.33-41
• /
• 2004

The type of trichomes, their density and pattern of distribution on leaves of 16 genotypes of mulberry, belonging to both diploid and polyploid categories, were studied by scanning electron microscope. The present investigation was undertaken to find out the relationship of physical attributes, especially the density and trichome types with higher acceptability and better rearing performance by the silkworm Bombyx-mori L. Two types of trichomes glandular and non-glandular types were observed on both the leaf surfaces of all the mulberry genotypes studied. In general, greater densities of trichomes were observed on the abaxial surface than the adaxial surface of leaves in most of the genotypes. Distribution of glandular trichomes were more in abaxial surface and non-glandular trichomes were more in adaxial surface. Overall, distribution of glandular and non-glandular trichomes per unit area of leaf did not follow any regular pattern. When leaves of those genotypes were fed to silkworms, trichome density was found to be significantly negatively correlated with the survival of larvae i.e., effective rate of rearing, but trichome density did not influence the economic characters of rearing. As the distribution of glandular trichomes (GT) and non-glandular trichomes (NGT) did not follow any definite pattern, no relation could be established between the GT and NGT densities with silkworm rearing performance. However, the ratio of GT and NGT in a particular genotype influenced the rearing parameters, higher the ratios better the rearing performance. High GT and NGT ratio (＞1.00) was found positively significant when correlated with economic parameters viz., larval weight, single cocoon weight and single shell weight. The study is useful in screening different mulberry genotypes for their better acceptability to silk-worm and higher rearing performance at the early stage of selection without actually conducting the rearing.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.6
• /
• pp.1183-1190
• /
• 2018

The environmental regulations are being strengthened all over the world, and the introduction of electric vehicles are actively being considered to cope with them effectively. It is essential to establish a charging infrastructure, which is an essential element of electric vehicle distribution. In this paper, power line communication technology essential for smart charging infrastructure is studied. A control board capable of achieving a physical layer speed of 10Mbps and a TCP/IP layer of 4.5Mbps, which conforms to the ISO/IEC 15118 international standard, and a control board mounted on the board and compliant with international standards. We have developed a software solution to perform functions for linking. In addition, in order to be applied to the combo-type DC fast charger, the hardware was designed to meet the industrial environment standard and the V2G communication module was developed by integrating it with the software solution.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.4
• /
• pp.83-91
• /
• 2021

Health is an outset of psychological, social, financial, and physical state. Several macroeconomic factors are entangled with health and mortality. Infant mortality and life expectancy are two keyguard on demographic research context on last few decades. On the other hand, foreign inflows play an unprecedent role for raising economic circulation and providing more opportunities to build a better society. The study aims to investigate the relationship between foreign direct investment (FDI), economic growth, and Bangladesh's health. This study employs time-series data from 1980 to 2018. Results show, with Auto-regressive Distribute Lag (ARDL) model, that there is significant cointegration among variables. Foreign investment and economic output relate significantly and positively to health. On the contrary, education is quasi-linked with a different sign-on different model. For model validation, pitfalls of time-series multicollinearity, heteroscedasiticy, and autocorrelation are not present. Also, CUSUM and CUSUMSQ tests are validating the model as stable and fit for future prediction. Medical assessment and education need more attention from the government as well as the private sector. FDI can play a catalyst role for improving the health sector, raising opportunity in educating and creating a better lifestyle. In order to optimize foreign investment, the government should implement necessary reforms and policies.

• Journal of Environmental Science International
• /
• v.19 no.11
• /
• pp.1363-1374
• /
• 2010

This study examined the physical and chemical properties of soil in Jang-San wetland in Busan Metropolitan City. The wetland covers wide and flat area comparing to its outside. The samples of the wetland soil were collected and analyzed in order to identify the profiles and chemical properties. According to the analyses of soil moisture and particle size distribution, the wetland soil mostly belongs to sandy loam with the soil moistures of 14.9-153.2%. The soil profiles are configured with O, A, B, and C horizons from the land surface. The organic matter content (2.38-16.7%) at most sampling locations decreases downwardly with the highest at 0-20 cm depth. The organic matter content has a good positive relationship with soil moisture content. According to X-ray diffraction analysis, the wetland soils contain quartz and feldspar (the main components of rhyolite porphyry) as well as montmorillonite, gibbsite, and kaolinite (the weathered products of feldspar). The wetland soil displays the highest iron concentration (average 22,052 mg/kg), indicating oxidation of iron. High concentrations of potassium (average 17,822 mg/kg) and sodium (average 5,394 mg/kg) originate from the weathering of feldspar. Among anions, sulfate concentration is highest with average 9.21 mg/kg that may originate from sulfate minerals and atmosphere.

• Journal of Service Research and Studies
• /
• v.14 no.1
• /
• pp.108-123
• /
• 2024

In particular, as the current educational institutions are becoming more competitive, universities need to make efforts to survive the fierce competition by improving their service qualities. In this situation, this study was conducted to confirm the effect of international students' evaluation of university service quality on university loyalty through university satisfaction and service engagements, And several implications can be suggested as follows. First, the dimensions of university service quality were identified as important factors that had a great influence on the university satisfaction of international students. Among the service quality dimensions, support services related to international students were found to be the most important variable in university satisfaction. The school's efforts to solve the inconvenience of international students and the grievances of students who feel difficulties that their own students do not feel are considered a very important factor in the satisfaction of international students. Second, it was found that international students' class engagement or friendship engagement can be increased through satisfaction with the school, and eventually, the increased engagements affect university loyalty. In particular, it has been verified that for international students, the loyalty of the school can be increased by establishing friendships with students from various countries and participating in various school programs. Finally, according to the purposes of studying abroad, the difference was confirmed between the groups studying for academic development and better employment and the group employed for overseas experience and immigration.