• 한국가스학회지
• /
• 제22권3호
• /
• pp.45-52
• /
• 2018

국제해사기구(IMO)의 선박 배출가스 기준 강화로 인해 LNG 연료추진선박의 필요성이 대두되고 있으며 관련 분야에 대한 기술개발 및 실용화 촉진 연구가 활발하게 진행되고 있다. LNG 연료탱크는 운항 중 연료소비로 인하여 잔류량이 70% 미만이 될 경우 슬로싱을 고려하여야 하므로 재액화 장치를 탑재하기 어려운 중소형 LNG 연료추진선박은 Type C 형태의 압력 탱크가 적용될 가능성이 높다. 이러한 LNG 연료추진선박에 적용되는 LNG 탱크는 구조적 안전성과 더불어 LNG를 오래 보관하기 위한 단열성능이 매우 중요하다. 본 연구에서는 Type C LNG Tank에 대한 단열성능 평가 절차를 제안하였고, 실험을 통해 LNG 탱크의 열적 특성으로 인한 온도, 압력, BOG(Boil Off Gas)의 변화를 비교, 분석함으로서 BOR(Boil Off Rate) 테스트 절차에 대한 타당성과 유효성을 검증하였다.

• 한국항해학회지
• /
• 제14권3호
• /
• pp.63-73
• /
• 1990

Students of the Mogpo Merchant Marine College must complete one year's shipboard training course according to IMO(International Maritime Organization) regulations as an obtaining matter of Certificate of Competency. The purpose of this shipboard training course lies int he student's acquiring practical knowledge and sill as a part of a course of study and, in the future, fostering essential adaptability and leadership, especially in bad circumstances on the sea. The shipboard training course has two kind that the students can be trained either on the training ship or on a merchant ship of the shipping company. In this paper, I only thought over the legal status of apprentice officers on the merchant ship and analyzed the problems practicably during shipboard training. This paper is made up of five chapters. The first chapter contains the purpose contents and method of this study, in the second, the meaning of shipboard practice education and training, in the third, the legal status of apprentice officers on merchant ship, in the fourth, the analysis of the provisions of the seamen act applied to apprentice officers on a merchant ship. And in the last chapter 5, the contents mentioned is summarized and directions are presented to amend the provisions of the seamen act applied to apprentice officers. The conclusions are as follows. 1.In case of shipboard training on overseas employment ship, the seamen act applied to the manning agent employing the apprentice officers should be reinforced. 2. The provisions of disembarkation in mid course by discipline of the seamen acts Article 24 should be relaxed. And the provisions in relations to seamen's duty to be a reason of discipline applied to apprentice officer among the provisions for ship's public order maintenance should be abolished. 3. The provision of repartriation completely should be applied to apprentice officers and the provisions of a journey expenditure during their embarkation or disembarkation have to be established. 4. The apprentice officers in shipboard training also need securing a basic wages provision to be criterion of an accident compensation. 5. The apprentice officers in shipboard training should not be in charge of third officer's or third engineer' study.

• 대한조선학회논문집
• /
• 제52권5호
• /
• pp.395-406
• /
• 2015

The Ballast Water Treatment System was developed to prevent the unintended transport of unwanted organisms from one region to another as demanded by the IMO (International Maritime Organization). Although various types of BWTS in the world have been developed until now and applied to various ships, there has been no systematic basis for its selection and installation. Currently, the system selection and installation are as per ship owner’s suggestion or by easy installation point of view by the shipyard. In order to organize, systemize and solve problems related to the selection and installation of BWTS, a definitive study has been performed to come up with the best alternative to derive value and criteria which were to be met for vessels which are to be equipped with BWTS. Multiple criteria were compared alongside each other during the course of this study. Accordingly an AHP (Analytic Hierarchy Process) analysis method for A, B and C companies were done for container ships with size 10,000 TEU and above. Equipment type for “A” company is “Filter, UV & TiO2” combined type. For “B” company it is “Filter & UV” combined type. Finally for “C” company it is “Electrolysis” type. Henceforth, the results of this study aims to come up with the optimum way to select the best and the most suitable BWTS for a certain vessel.

• 대한조선학회논문집
• /
• 제52권6호
• /
• pp.471-477
• /
• 2015

When a ship sails in a seaway, the resistance on a ship increases due to incident waves and winds. The magnitude of added resistance amounts to about 15–30% of a calm-water resistance. An accurate prediction of added resistance in waves, therefore, is essential to evaluate the performance of a ship in a real sea state and to design an optimum hull form from the viewpoint of the International Maritime Organization (IMO) regulations such as Energy Efficiency Design Index (EEDI) and Energy Efficiency Operational Indicator (EEOI). The present study considers added resistance problem of AFRAMAX-class tankers with the conventional bow and Ax-bow shapes. Added resistance due to waves is successfully calculated using 1) a three-dimensional time-domain seakeeping computations based on a Rankine panel method (three-dimensional panel) and 2) a commercial CFD program (STAR-CCM+). In the hydrodynamic computations of a three-dimensional panel method, geometric nonlinearity is accounted for in Froude-Krylov and restoring forces using simple wave corrections over exact wet hull surface of the tankers. Furthermore, a CFD program is applied by performing fully nonlinear computation without using an analytical formula for added resistance or empirical values for the viscous effect. Numerical computations are validated through four degree-of-freedom model-scale seakeeping experiments in regular head waves at the deep towing tank of Hyundai Heavy Industries.

• 대한조선학회논문집
• /
• 제53권3호
• /
• pp.217-227
• /
• 2016

Recent accidents of crude oil tankers have resulted in sinking, grounding of vessels and significant levels of marine pollution. Therefore, International Maritime Organization (IMO) has been strengthening the regulations of ship maneuvering performance in MSC 137. The evaluation of maneuvering performance can be made at the early design stage; it can be investigated numerically or experimentally. The main objective of this paper was to investigate the maneuvering performance of a VLCC due to the increase of rudder force at an early design stage for low speed in shallow water conditions. It was simulated in various operating condition such as deep sea, shallow water, design speed and low speed by using the numerical maneuvering simulation model, developed using MMG maneuvering motion equation and KVLCC 2 (SIMMAN 2008 workshop). The effect of increasing the rudder force can be evaluated by using numerical simulation of turning test and ZIG-ZAG test. The research showed that, increasing the rudder force of a VLCC was more effective on improving the turning ability than improving the course changing ability especially. The improvement of turning ability by the rudder force increasing is most effective when the ship is sailing in shallow water at low forward speed.

• Journal of Welding and Joining
• /
• 제35권3호
• /
• pp.82-87
• /
• 2017

Recent trends in shipbuilding and offshore industries are a huge increase in the ship size and the exploration and production of oil and natural gas in the arctic offshore region. High performance steel plates are required by these industrial trends. Also in IMO(International Maritime Organization) has begun to regulate of fuel of ship to environmental protection, therefore it is little bit difficult to use bunker-C oil to working ship. As the problem of environmental change such as global warming is emerged, the operation of the ship is considered to be involved in the environmental change problem, and the regulation of environmental pollution is gradually strengthened. As these environmental regulations are strengthened demand for LNG fuel ships is rapidly increasing. Currently, cryogenic steels used in LNG tanks include aluminum alloy, SUS 304, and 9%-Ni steel. Those steels are has high cost to construction of large LNG carrier. The new materials were suggested several steel mills to decrease construction cost and easy construction. The new cryogenic steel should be evaluate safety to applied real structure include LNG ship. Therefore, in this study, fracture toughness of weld joints were investigated with cryogenic steel for application of LNG tank.

• Journal of Advanced Marine Engineering and Technology
• /
• 제37권2호
• /
• pp.236-241
• /
• 2013

처음 승선한 실습 기관사가 선박 기기에 대한 다양한 경험을 쌓고 비상시에 대비할 수 있을 정도의 수준에 도달하려면 긴 시일과 많은 비용이 든다. 따라서 현장과 유사한 환경에서 짧은 시간내 체계적인 교육과 훈련을 통해 다양한 경험과 비상시 적절한 판단을 가능케 하도록 STCW-95 권고안을 따르는 여러 형태의 시뮬레이터가 개발되어 교육 훈련 도구로써 활용되고 있다. 현재 국내에서 운용되고 있는 기관시뮬레이터는 전량 외국에서 도입된 것으로서 국제협약의 개정이나 기술발전사항 등을 바로 반영하기 힘든 상황이다. 본 연구에서는 실습기관사가 보조 보일러, 배기 보일러 및 증기터빈과 같은 증기계통의 각종 장치간의 연관성을 쉽게 파악할 수 있도록 하는 선박용 보조 보일러 시뮬레이터 개발에 대하여 논한다.

• 한국해양공학회지
• /
• 제31권4호
• /
• pp.266-273
• /
• 2017

In recent years, LNG bunkering terminals are needed to supply LNG as fuel to meet the emission requirements of the International Maritime Organization (IMO). A floating LNG bunkering terminal (FLBT) is one of the most cost-effective and environmentally friendly LNG bunkering systems for storing LNG and transferring it directly to an LNG fuel vessel. The FLBT maintains its position using mooring systems such as spread mooring and turret mooring. The loads on the vessel and mooring lines must be carefully determined to maintain their positions within the operable area. In this study, the wind loads acting in several side-by-side arrangements on the FLBT and LNG-BS were estimated using wind tunnel tests in the Force Technology, and the shielding effect due to the presence of ships upstream was evaluated. In addition, the empirical formulations proposed by Fujiwara et al. (2012) were used to estimate the wind force coefficients acting on the FLBT and those results were compared with experimental results.

• 한국항만경제학회지
• /
• 제37권2호
• /
• pp.19-31
• /
• 2021

이 연구는 COVID-19 판데믹 전후 즉, 2019년부터 2021년 현재까지의 해운경기와 동향분석을 통해 이번 컨테이너 해운호황을 면밀히 분석하고 그 원인을 알아보았다. 또한 이 연구는 우리 해운기업이 포스트 코로나 시대에 지속가능한 성장을 위해 정책방향을 제언하였다. 연구 결과, COVID-19 확산이 유발한 수요감소에 대한 대응으로 선사들이 선박가동중단(idle)을 늘렸다는 언론 보도와는 다르게 스크러버 설치를 위해 가동중단선박이 급속히 늘어난 것을 확인하였다. 이 연구에서 제언한 정책방향으로는 선박공급과잉의 원인 분석과 해운산업 증요성에 대한 전국민적 공감대 확보가 필요하다는 것이었다. 구체적으로 첫 번째, 해운정책으로 인해 오히려 선박공급과잉이 심화되었는지 알아볼 필요가 있다는 것, 두 번째, 해운정책의 기조 특히, 호황기 정책 기조를 재검토할 필요가 있다는 것, 세 번째, 불황기 공급확장 정책 이외에 호황기 공급조절 정책과 같은 해운정책의 포트폴리오를 구성해야 한다는 것 등이다. 마지막으로, 정책 당국과 해운 관련 국책연구기관의 해운경기 예측력을 제고시켜야 하며, 지속적으로 선사CEO 대상 선박투자 세미나를 개최하고, S&P 전문가 및 해운시장 분석가를 양성해야 할 것을 주장하였다.

• 한국해양공학회지
• /
• 제35권3호
• /
• pp.173-182
• /
• 2021

The maneuvering performance of a ship on the actual sea is very different from that in calm water due to wave-induced motion. Enhancement of a ship's maneuverability in waves at the design stage is an important way to ensure that the ship navigates safely. This paper focuses on the maneuvering prediction of a Russian trawler in wind and irregular waves. First, a unified seakeeping and maneuvering analysis of a Russian trawler is proposed. The hydrodynamic forces acting on the hull in calm water were estimated using empirical formulas based on a database containing information on several fishing vessels. A simulation of the standard maneuvering of the Russian trawler was conducted in calm water, which was checked using the International Maritime Organization (IMO) standards for ship maneuvering. Second, a unified model of seakeeping and maneuvering that considers the effect of wind and waves is proposed. The wave forces were estimated by a three-dimensional (3D) panel program (ANSYS-AQWA) and used as a database when simulating the ship maneuvering in wind and irregular waves. The wind forces and moments acting on the Russian trawler are estimated using empirical formulas based on a database of wind-tunnel test results. Third, standard maneuvering of a Russian trawler was conducted in various directions under wind and irregular wave conditions. Finally, the influence of wind and wave directions on the drifting distance and drifting angle of the ship as it turns in a circle was found. North wind has a dominant influence on the turning trajectory of the trawler.