• International Journal of Naval Architecture and Ocean Engineering
• /
• v.6 no.2
• /
• pp.459-470
• /
• 2014

During ship design, welding-induced distortions are roughly estimated as a function of the size of the component as well as the welding process and residual stresses are assumed to be locally in the range of the yield stress. Existing welding simulation methods are very complex and time-consuming and therefore not applicable to large structures like ships. Simplified methods for the estimation of welding effects were and still are subject of several research projects, but mostly concerning smaller structures. The main goal of this paper is the application of a multi-layer welding simulation to the block joint of a ship structure. When welding block joints, high constraints occur due to the ship structure which are assumed to result in accordingly high residual stresses. Constraints measured during construction were realized in a test plant for small-scale welding specimens in order to investigate their and other effects on the residual stresses. Associated welding simulations were successfully performed with fine-mesh finite element models. Further analyses showed that a courser mesh was also able to reproduce the welding-induced reaction forces and hence the residual stresses after some calibration. Based on the coarse modeling it was possible to perform the welding simulation at a block joint in order to investigate the influence of the resulting residual stresses on the behavior of the real structure, showing quite interesting stress distributions. Finally it is discussed whether smaller and idealized models of definite areas of the block joint can be used to achieve the same results offering possibilities to consider residual stresses in the design process.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.2 no.4
• /
• pp.200-210
• /
• 2010

In this paper, different evaluation methods of Hot Spot Stresses (HSS) have been applied to four different welded structure details in order to compare them and to illustrate their differences. The HSSs at failure-critical locations were calculated by means of a series of finite element analyses. There was good overall agreement between calculated and experimentally determined HSS on the critical locations. While different methods and procedures exist for the computation of the structural hot-spot stress at welded joints, the recommendations within the International Institute of Welding (IIW) guideline concerning the 'Hot Spot Stress' approach were found to give good reference stress approximations for fatigue-loaded welded joints. This paper recommends and suggests an appropriate finite element modeling and hot spot stress evaluation technique based on round-robin stress analyses and experimental results of several welded structure details.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1430-1436
• /
• 2010

Tubular member is hollow and is an excellent source of structural member with great buckling resistance and tortional resistance. With its development and simplicity in structure, steel tubular truss has the ability to be structured in long span bridges, without a stiffener. Recently, it has been used in many countries in Europe, Canada, Japan, and the US with the help of international committees such as CIDECT(International Committee for the Development and Study of Tubular Structures and International Institute of Welding). The most important problem when using the tubular member is the fact that it is difficult to test the fatigue stress determined by nominal stress, since geometrical stress concentration occurs due to the welded joint's nod of complexity. The purpose of this study is to compare and examine current theories and widely applied Hot Spot stress determinations through finite element analysis, which is about welded joints of steel tubular truss. We would like to suggest a way of design practice which involves a bridge plan with rarely domestically used steel tubular truss` basic research data as well as considering the future of tubular member.

• International Journal of Computer Science & Network Security
• /
• v.21 no.12spc
• /
• pp.675-683
• /
• 2021

An article is devoted to developing the concept of inter-territorial collaboration in the context of strengthening its economic security. This concept is based on the study of international experience and successful OTG functioning in Ukraine. The idea includes directions, forms, tools, procedures, and financial sources for joint projects that strengthen territorial associations' economic security. The research consists of assessing the state of economic development of territorial communities and forms of their cooperation with other territorial communities. Analysis, synthesis, induction, and deduction are the main methods of scientific knowledge used to summarize statistical information, normative and legal support, and global experience of cooperation of territorial communities. The study results include the main areas of cooperation of territorial communities in Ukraine, including long-term collaboration. The study also contains successful examples of collaboration between different territorial communities, applying practical aspects and tools to form effective interaction. The main points of discussion concern various forms of interaction between territorial communities, which allow achieving the economic goal more quickly and effectively.

• International Journal of Advanced Culture Technology
• /
• v.11 no.2
• /
• pp.330-344
• /
• 2023

This research report cuts across management sciences (market strategy entry mode development) and innovative technology (Electric Vehicle (EV)) alongside measures to submerge global warming. The development of a successful entry mode for the electric Vehicle into the African continent is the main objective of the study. The study focuses on an analysis of how electric car manufacturers can enter the African market in other to achieve global sustainability and social responsibility. The methodology is based on identifying the factors that affect the choice of an entry mode into international markets by multinational companies desiring to leverage their revenue through a foreign market. It also offered a quantitative approach that can support the economic and sustainability entry mode model for EVs and a qualitative approach of Porter's five forces analysis as an entry mode coaching tool for EVs. These proxies are used in quite a wide range of multivariate statistical methods (trend analysis, ratio, and probability, comparative t-test technique, auto-regression, and ordinary least square technique). The result acknowledges joint venture and setting of the plant (physical presents) as the optimal entry mode in African EV market. It requires the EV manufacturers a tire-free emission innovation technology in order to optimize the global sustainability initiative.

• International Journal of Internet, Broadcasting and Communication
• /
• v.13 no.4
• /
• pp.112-120
• /
• 2021

Recently, the number of consumers using digital online distribution platforms is increasing. This caused the rapid growth of the e-commerce market and increased delivery volume in urban areas. The logistics system, designed ar006Fund the city center to handle the delivery volume, operates a delivery system from the outskirts of the city to the urban area using cargo trucks. This maintains an ecosystem of high-cost and inefficient structures that increase social costs such as road traffic congestion and environmental problems. To solve this problem, research is being conducted worldwide to establish a high-efficiency urban joint logistics system using urban railway facilities and underground space infrastructure existing in existing cities. The joint logistics system begins with linking unmanned delivery automation services that link terminal delivery such as cargo classification and stacking, infrastructure construction that performs cargo transfer function by separating from passengers such as using cargo platform. To this end, it is necessary to apply the device to the vertical and horizontal transportation machine supporting the vertical transfer in the flat space of the joint logistics terminal, which is the base technology for transporting cargo using the transfer robot to the destination designated as a freight-only urban railway vehicle. Therefore, this paper aims to derive holistic viewpoints needs for design requirements for vertical and vertical transportation machines and freight transportation standard containers, which are underground railway logistics transport devices to be constructed by urban logistics ecosystem changes.

• International Journal of Highway Engineering
• /
• v.8 no.2 s.28
• /
• pp.49-54
• /
• 2006

The purpose of this study was to determine the effect of expansion joint spacing (slab size) on the life cycle costs of owning Portland Cement Concrete (PCC) airfield pavements. Previous research has shown that slab size has a statistically significant impact on pavement performance. A probabilistic life cycle cost analysis was performed to determine if the effect of slab size on pavement performance would affect the total cost of ownership of PCC pavements. Data from 48 Pavement Condition Index (PCI) inspections of military and civilian airfields were used to develop probability-of-distress-by-condition curves, which were then used to develop probabilistic cost-of-repair-by-condition curves. A present worth life cycle cost analysis was then performed for various slab sizes, using construction costs, rehabilitation costs, and maintenance costs. Maintenance costs were determined by assuming a condition deterioration rate appropriate for each slab size and applying the cost-by-condition curves. The probabilistic cost-of-repair-by-condition curves indicated that smaller slabs are more expensive to repair on a unit cost basis. Life cycle cost analysis showed that larger slabs have a higher total cost of ownership than smaller slabs due to a faster rate of deterioration.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.43 no.2
• /
• pp.78-84
• /
• 2021

We explored the indigenous local knowledge associated with the use of snails by Baiga people in Baihar tehsil of Balaghat district in central India through interview with a semi-structured questionnaire. Results revealed that Baiga people widely accept snails of 3-5 morpho-groups belonging to Ampullariidae, and Viviparidae family as food. Besides, use of snail as therapeutic agents for ailments like body ache, joint pain, digestion, weakness of bones etc. were found common. Hand-picking of snails from the wild environments as well as agriculture field was the primary way of harvesting edible snails. We advocate the development of a farming system for the continuous supply of snails as a food resource, advancement of scientific investigation of functional properties of them, economic progress of the region and therefore the overall sustainability.

• The Journal of the Korea Contents Association
• /
• v.18 no.3
• /
• pp.456-471
• /
• 2018

A Comparative Study on the Korean animation industry and 3 of this paper is a matter of Korea, China, Chinese animation industry and the Current Status and Problem of Chinese animation business in overseas markets.Aimed to find ways to expand exports. In order to realize this purpose with theoretical backgrounds, such as animation concept and characteristics of the research literature, look at ways a paper from an animation industry, work, China.Chinese animation development plan based on the bibliographic data and case study based on books. First, by government in terms of development measures and supplement the system and a law on the animation industry. First of all animation industry and producers To help protect the government is to become an active policy must be supported with funds and animation to ease the relevant laws and regulations and joint venture with foreign countries.Pursuing an active policy is needed. Second, an animated feature can get the full benefit of the industrial chain to and create derivative works as a multilateral needs to be improved. Third, the animation expertise to build human resources need to be nurtured. Fourth, in order to cater to overseas markets in China will create various types of Chinese traditional culture based on the animation is important. Fifth, and a mobile home page to get in. Sixth, will be easily exported to overseas markets to the creation of joint international exchange and international.

• Journal of the Korean Institute of Navigation
• /
• v.12 no.1
• /
• pp.113-136
• /
• 1988

Decision Science or Decision Analysis can be described as a scientific methodolog to provide suitable quantitative information for the decision maker to be able to selected the best feasible alternative on the given decision environment and thus we can say that where there are decision problems, there needs the decision analysis to be applied to them. International shipping is generally said to be the cheapest and most widely used means of transport in international trade and each of the hundreds of seaport. So far as the decision makings in the shipping and port transportation are concerned, of real importance is to understand what the decision problems in each of shipping and port transportation really are and to recognize the meaning of relevance between shipping and seaport in the outworn phrase, that is to say, "The chain is as strong as its weakest link." This paper is intended to present a literature survey on the applied decision analysis to shipping and port transportation problems which have actually been involved in the wide variety of decision environment. At first, the author suggests four divisional framework such as decision analysis in each field of Shipping Economics, Management and Operations of Shipping, Port Economics, and Port Operation and Management, according to the main concern of the decision environment, and then the literature surveys on those four major divisions are described including the problems and solution approaches in each case. The author concludes the paper with the comment on the need of joint research around this area by citing the phrase of "a process of updating the decision makers' intuitions."s' intuitions."quot;