• 동력기계공학회지
• /
• 제20권1호
• /
• pp.5-10
• /
• 2016

Swing check valve is opened when the flow direction is forward, when the flow is reversed, the valve is automatically closed by back pressure. In this study, the internal flow field analysis of the valve was conducted by Fluent. The working fluid used in the study, using liquefied methane $-165^{\circ}C$ (CH4) and velocity field, pressure field, pressure drop coefficient were simulated by varying separately the opening divergence into four intervals from 0 to 100%. The approximate research result are as follow : When the opening divergence is smaller, it appears high pressure on the upstream side, this value is relaxed when the opening divergence is large. Flow rate coefficient of the valve shows a larger value as the degree of opening becomes larger, confirming that the check valve used in the study is in the effective flow rate counting range.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.513-516
• /
• 2000

This paper presents the analytical studies on the stress and strain of driven valve system of internal combustion engines. The stress and strain is predict using FEM. The particular interest is the dynamic strain at a specific point of the valve and valve seat. Cam and follower Assuming that one rigid surface. This study forced the effects changing Young's modulus and density of valve and valve seat contact area. It supports that the indirect method using FEM is reliable for prediction the actual displacement, stress and strain in the valve system.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2005년도 연구개발 발표회 논문집
• /
• pp.441-447
• /
• 2005

The present study is aimed at understanding the flow physics associated with a safety valve applied to LNG ship engines. One-dimensional gasdynamic analyses and axisymmetric, compressible Navier-Stokes computations have been carried out to provide a qualitative and quantitative knowledge base for an effective design of the safety valve. Gasdynamic forces and thrust coefficients are obtained regarding a change in chamber pressure and distance between the nozzle exit and valve sheet which are major parameters to offer a variation in the flow feature. The present results show that the control of the passage area between the nozzle exit and valve sheet can attenuate the strength of shockwave generated in front of the valve sheet, which causes harm to stable system operation.

• 한국안전학회지
• /
• 제10권3호
• /
• pp.11-20
• /
• 1995

In recent years, the study on the high efficiency of the internal combustion engine has been mainly proceeding. In this study, we developed rotary valve to achieve the improvement of volumetric efficiency and to be simple construction. And then made a comparative analysis between rotary and poppet valve. In this experiment, rotary valve enlarged the flow area of valve port to minimize the resistance of the fluid flow and to flow smoothly in intake and exhaust process. Indeed, valve timing was controlled properly lest positive pressure in exhaust process should affect intake process. Motoring and firing experiments were using engine speed and air-fuel ratio as the principle parameter and the full opening of throttle valve and minimum spark advance for best torque (MBT) as engine operating variables.

• Journal of Cardiovascular Imaging
• /
• 제31권1호
• /
• pp.51-61
• /
• 2023

BACKGROUND: Valvular heart disease (VHD) is a common cause of cardiovascular morbidity and mortality worldwide; however, its epidemiological profile in Korea requires elucidation. METHODS: In this nationwide retrospective cohort study from the Korean valve survey, which collected clinical and echocardiographic data on VHD from 45 medical centers, we identified 4,089 patients with VHD between September and October 2019. RESULTS: The aortic valve was the most commonly affected valve (n = 1,956 [47.8%]), followed by the mitral valve (n = 1,598 [39.1%]) and tricuspid valve (n = 1,172 [28.6%]). There were 1,188 cases of aortic stenosis (AS) and 926 cases of aortic regurgitation. The most common etiology of AS was degenerative disease (78.9%). The proportion of AS increased with age and accounted for the largest proportion of VHD in patients aged 80-89 years. There were 1,384 cases of mitral regurgitation (MR) and 244 cases of mitral stenosis (MS). The most common etiologies for primary and secondary MR were degenerative disease (44.3%) and non-ischemic heart disease (63.0%), respectively, whereas rheumatic disease (74.6%) was the predominant cause of MS. There were 1,172 tricuspid regurgitation (TR) cases, of which 46.9% were isolated and 53.1% were associated with other valvular diseases, most commonly with MR. The most common type of TR was secondary (90.2%), while primary accounted for 6.1%. CONCLUSIONS: This report demonstrates the current epidemiological status of VHD in Korea. The results of this study can be used as fundamental data for developing Korean guidelines for VHD.

• 한국기계가공학회지
• /
• 제20권9호
• /
• pp.63-69
• /
• 2021

This study aims to determine the flow characteristics of a one-inch small ball valve and glove valve used in industrial plants. The flow was changed through an experimental equipment, and the internal flow characteristics of the valves were compared. Considering the pressure drop, the decrease in the slope of the ball valve based on the degree of the valve opening was relatively greater than that of the glove valve; further, the slope of the glove valve was gentle while the pressure drop was high. The flow velocity of the ball valve remains consistent after the valve was opened by 70%, whereas the flow velocity of the glove valve constantly increased. The valve loss factor of the ball valve was relatively low compared with that of the glove valve. When the valve was opened by 20%, which is the beginning stage of the valve opening, the valve loss factor of the ball valve was high and gradually became low. This is a structural problem of the ball valve, and the loss factor is significant because the flow path installed at the ball valve has a considerably small area. However, the overall loss factor of glove valve is high because it has a complicated structure of flow path.

• 한국추진공학회지
• /
• 제11권4호
• /
• pp.19-25
• /
• 2007

LNG 안전밸브는 LNG 수송배관 내부의 압력조절에 사용되며, 안전밸브를 통하는 유동은 소음과 진동을 동반하기 때문에 시스템에 부정적으로 작용한다. 본 연구에서는 LNG 안전밸브의 실용적인 설계를 위하여, 2차원 축대칭 압축성 Navier-Stokes 방정식에 의한 유한 체적법을 사용하여 LNG 안전밸브를 통하는 압축성 유동의 특성을 수치해석적 방법으로 조사하였으며, 이론해석결과와 비교하였다. 수치해석 결과, 밸브판의 형상 및 노즐출구와 밸브판 사이의 간격은 밸브판에 미치는 기체역학적 힘에 상당한 영향을 미치며, 밸브판에서 추력계수가 급격하게 증가하는 노즐출구와 밸브판 사이의 거리가 존재하는 것을 알았다.

• 한국생산제조학회지
• /
• 제20권5호
• /
• pp.553-558
• /
• 2011

This study have goal with conceptual design for offshore structures of high pressure drop control valve for localization valve for development accomplished with flow analysis based on provision of ANSI B16.34, ANSI B16.10, ANSI B16.25. In order to localize the Offshore structures high pressure drop control valve. This study is numerical analysis for zambil offshore project of high pressure drop control valve. The solver which ANSYS workbench used for offshore structures analysis. The working fluids assumed the glycerin(C3H8O3). The structural analysis used ANSYS which is a commercial code. Stress analysis result of internal pressure in valve showed lower than yield strength. This is expect to need more detail design and verification for stem and disk structure. In this study a multi-disk of high pressure drop control valve is designed and manufactured. Then, the flow rate and high pressure dorp of fluids flowing in the high pressure drop control valve is CAE. So, this system can be easily substituted for the existing zambil offshore project system. Finally, safety estimation for trim design of high pressure drop control valve for offshore structures.

• Journal of Chest Surgery
• /
• 제27권3호
• /
• pp.187-190
• /
• 1994

Between March, 1989, and August, 1993, 10 patients underwent aortocoronary bypass surgery concomittant with cardiac valve replacement. They were 6 men and 4 women, the age ranging from 47 to 64. 7 patients underwent single valve replacement and 2 patients underwent double valve replacement, Another one patient underwent only CABG one year after valve replacement and he had no evidence of prosthetic valve failure. Total number of graft vessels were.15,14 were saphenous venous grafts and 1 was internal mammary artery graft. Dyspnea on exertion was frequent symptom and was found in all patients. 8 patients presented stable angina, only 1 patient presented postinfarct angina and another 1 patient presented no angina symptom. The graft was placed prior to valve replacement and periods of myocardial ischemia were kept at a minimum by maintaining coronary perfusion throughout operation. Postoperative course was uneventful and there was no hospital mortality, as was supported by many reports, it is our opinion that simultaneous valve replacement and aortotomy bypass graft does not increase the risk of cardiac valve replacement substantially.

• 한국가스학회지
• /
• 제21권4호
• /
• pp.70-75
• /
• 2017

본 연구에서는 차단기능형 수평식 가스밸브와 기존 수직식 가스밸브의 변형거동 안전성을 FEM으로 해석하였다. FEM 해석결과에 의하면, 차단기능형 수평식 가스밸브의 나사부와 가스방출구에 가스내압이 작용할 때 밸브몸체의 우측 끝단부에서 최대 변형량 $4.4{\mu}m$가 발생하였다. 두 번째로 큰 변형량 $2.9{\mu}m$는 안전밸브가 설치된 포트의 끝단부에 형성된 것으로 나타났다. 이렇게 작은 변형량이 발생한 것은 나사부, 가스방출구, 스템 및 스핀들 축이 장착되는 포트, 안전밸브 포트로 구성되는 수평식 가스밸브의 평형이 잘 이루어지도록 설계되었기 때문이다. 반면에 나사부와 가스방출구에 가스내압이 작용할 때, 기존 차단기능형 수직식 가스밸브의 상단부에서 최대 변형량 0.076mm가 형성된 것으로 나타났다. 가스유출구의 좌측 끝단부에서 두 번째로 큰 최대 변형량 0.055mm가 발생하였다. 이러한 변형량은 차단기능형 안전장치의 그루브에 삽입된 오링의 밀봉간극에 영향을 미칠 가능성이 높다. 따라서 본 연구에서는 LPG 용기용 가스밸브의 가스누출을 완벽하게 차단할 수 있는 메커니즘을 갖춘 차단기능형 수평식 가스밸브가 수직식 가스밸브에 비해 우수하다할 수 있다.