• 전자공학회논문지A
• /
• 제31A권5호
• /
• pp.121-125
• /
• 1994

We examine the conventional method of measuring the internal optical loss using the dependence of the reciprocal external quantum efficiency on the cavity length in laser diodes. It is shown that the implicit assumption of constant internal differential quantum efficiency ${\eta}_{id}$, which has been customarily misinterpreted as internal quantum efficiency ${\eta}_{i}$, is not valid for devices with short cavity length. Therefore, for reliable measurments long cavity data should be used.

• 한국전기전자재료학회논문지
• /
• 제28권10호
• /
• pp.676-681
• /
• 2015

Recently many studies being carried out to increase the light efficiency of LED. The external quantum efficiency of LED, generally the light efficiency, is determined by the internal quantum efficiency and the light extraction efficiency. The internal quantum efficiency of LED was already reached to more than 90%, but the light extraction efficiency is still insufficient compared with the internal quantum efficiency because the total internal reflection is generated in the interface between the LED chip and air. Thus, we studied about flip chip LED with PSS and performed the optical simulation which find more optimized PSS for flip chip LED to increase the light extraction efficiency. Decreasing of the total internal reflection and effect of diffused reflection according to PSS improved the light extraction efficiency. To get more higher the efficiency, we simulated flip chip with PSS that the parameters are arrangement, edge spacing, radius, height and shape of PSS.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.21-21
• /
• 2003

To increase the light-emission efficiency of LED, we increased the internal and external quantum efficiency by suppressing the defect formation in the quantum well and by increasing the light extraction efficiency in LED, respectively. First, the internal quantum efficiency was improved by investigating the effect of a low temperature (LT) grown p-GaN layer on the In$\sub$0.25/GaN/GaN MQW in green LED. The properties of p-GaN was optimized at a low growth temperature of 900oC. A green LED using the optimized LT p-type GaN clearly showed the elimination of blue-shift which is originated by the MQW damage due to the high temperature growth process. This result was attributed to the suppression of indium inter-diffusion in MQW layer as evidenced by XRD and HR-TEM analysis. Secondly, we improved the light-extraction efficiency of LED. In spite of high internal quantum efficiency of GaN-based LED, the external quantum efficiency is still low due to the total internal reflection of the light at the semiconductor-air interface. To improve the probability of escaping the photons outside from the LED structure, we fabricated nano-sized cavities on a p-GaN surface utilizing Pt self-assembled metal clusters as an etch mask. Electroluminescence measurement showed that the relative optical output power was increased up to 80% compared to that of LED without nano-sized cavities. I-V measurement also showed that the electrical performance was improved. The enhanced LED performance was attributed to the enhancement of light escaping probability and the decrease of resistance due to the increase in contact area.

• 세라미스트
• /
• 제21권1호
• /
• pp.64-79
• /
• 2018

Recent years, OLEDs have been progressed intensively and been widely applied to Display and Lighting industry,Almost 100% internal quantum efficiency was achieved by developing new materials and structure optimization. However, external quantum efficiency was still low due to total internal reflection of light inside OLED devices and absorption of light at the surface of metal electrode. In order to improve external quantum efficiency of OLED devices, various kinds of optical functional structures were introduced to inside and outside of OLED devices to increase light extraction efficiency. In this paper, various efforts to apply optical functional structures in OLED devices were reviewed and way to improve light extraction efficency of OLED devices were discussed.

• Bulletin of the Korean Chemical Society
• /
• 제35권3호
• /
• pp.705-708
• /
• 2014

We demonstrate the blue InGaN/GaN multiple quantum wells light-emitting diodes (LEDs) with an embedded air-gap photonic crystal (PC) which was fabricated by the lateral epitaxial overgrowth of GaN layer on the tungsten (W) nano-masks. The periodic air-gap PC was formed by the chemical reaction of hydrogen with GaN on the W nano-mask. The optical output power of LEDs with an air-gap PC was increased by 26% compared to LEDs without an air-gap PC. The enhanced optical output power was attributed to the improvement in internal quantum efficiency and light extraction efficiency by the air-gap PC embedded in GaN layer.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.467.1-467.1
• /
• 2014

Quantum dots (QD) solar cells has received considerable attention due to their potential of improving the overall conversion efficiency by harvesting excess energy via multiple excitons generation (MEG). Although there have been many reports which show MEG phenomena by using optical measurement of quantum dots themselves, carrier multiplication in real QD photovoltaic devices has been sparsely reported due to difficulty in dissociation of excitons and charge collection. In this reports, heterojunction QD solar cells composed of PbS QD monolayer on highly crystalline $TiO_2$ thin films were fabricated by using Langmuir-Blodgett deposition technique to significantly reduce charge recombination at the interfaces between each QD. The PbS CQDs monolayer was characterized by using UV-vis, transmission electron microscopy (TEM) and atomic force microscopy (AFM). The internal quantum efficiency (IQE) for the monolayer QD solar cells was obtained by measurement of external quantum efficiency and determining light absorption efficiency of active layer. Carrier multiplication was observed by measuring IQE greater than 100% over threshold photon energy. Our findings demonstrate that monolayer QD solar cell structure is potentially capable of realizing highly efficient solar cells based on carrier multiplication.

• 전자공학회논문지A
• /
• 제33A권7호
• /
• pp.185-197
• /
• 1996

We have adopted the strain compensated PBH(planar buried heterostructure) - LD in which the MQW active layer consisted of 1.4% compressively strained GainAsP (E$_{g}$ = 0.905eV) wells and 0.7% tensile strained GaInAsP(E$_{g}$ = 1.107eV) barriers grown by metal organic vapor phase epitaxy (MOVPE). We hav einvestigated effects of number of wells and the structure of the separate confinement heterostructure (SCH) layer in the strain-compensated MQW-PBH-LD. The threshold current, the external quantum efficiency, the transparency current density J$_{o}$, and the gain constant .beta. have been evaluated for uncoated MQW-PBH-LD. As the number of wells increases, the internal quantum efficiency and the transparency current density decreases, whereas the gain contant increases. The small width of the SCH layer shows the large internal quantum efficiency. The small internal loss and the large gain constant have been obtained by inserting the large bandgap SCH layer.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 추계학술대회
• /
• pp.251-254
• /
• 2012

본 논문에서는 양자 우물 구조 변화에 따른 GaN 기반 LED의 출력 특성을 분석하였다. 사용된 LED의 기본 구조는 GaN 버퍼층을 기반으로 GaN 장벽과 InGaN 양자 우물로 이루어진 활성 영역이 AlGaN EBL(Electron Blocking Layer)과 AlGaN HBL(Hole Blocking Layer) 사이에 구성되어 있다. ISE-TCAD를 이용하여 LED 활성영역의 양자 우물의 두께와 개수, 장벽의 도핑 변화에 따른 출력 전력, 내부 양자 효율 특성을 분석하였다.

• Current Optics and Photonics
• /
• 제1권6호
• /
• pp.626-630
• /
• 2017

GaN-based green light-emitting diode (LED) structures suffer from low internal quantum efficiency (IQE), known as the "green gap" problem. The IQE of LED structures is expected to be improved to some extent by exploiting the Purcell effect. In this study, the Purcell effect on the IQE of green LED structures is investigated numerically using a finite-difference time-domain simulation. The Purcell factor of flip-chip LED structures is found to be more than three times as high as that of epi-up LED structures, which is attributed to the high-reflectance mirror near the active region in the flip-chip LED structures. When the unmodified IQE is 20%, the relative enhancement of IQE can be greater than 50%, without utilizing the surface-plasmon coupling effect. Based on the simulation results, the "green gap" problem of GaN-based green LEDs is expected to be mitigated significantly by optimizing flip-chip LED structures to maximize the Purcell effect.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제11C권3호
• /
• pp.53-57
• /
• 2001

The organic light-emitting devices (OLEDs) based on fluorescence have low efficiency due to the requirement of spin-symmetry conservation. By using the phosphorescent material, internal quantum efficiency can reach 100%, compared with 25% in the case of the fluorescent material. Thus, phosphorescent OLEDs have recently been extensively studied and shown higher internal quantum efficiency than the conventional OLEDs. In this study, we investigated the characteristics of the phosphorescent OLEDs with the green emitting phosphor, $Ir(ppy)_3$ (tris(2-phenylpyridine)iridium). The device with a structure of ITO/TPD$Ir(ppy)_3$ doped in BCP/BCP/$Alq_3$/Li:Al/Al was fabricated, and its electrical and optical characteristics were studied. By changing the doping concentration of $Ir(ppy)_3$, we fabricated several devices and investigated their characteristics.