• Title/Summary/Keyword: Internal loss

Search Result 1,349, Processing Time 0.03 seconds

Effect of the Number and Location of Implants on the Stress Distribution in Three-unit Fixed Partial Denture: A Three-Dimensional Finite Element Analysis (임플란트 고정성 보철물에서 수와 식립위치 변화에 따른 골과 임플란트에서의 응력분포에 관한 3차원 유한요소법적 연구)

  • Lee, Woo-Hyun;Lim, Jong-Hwa;Cho, In-Ho
    • Journal of Dental Rehabilitation and Applied Science
    • /
    • v.26 no.3
    • /
    • pp.221-239
    • /
    • 2010
  • Bone loss may occur depending on the loading conditions. careful treatment planning and prosthetic procedures are very important factors for the proper distribution of stress. Evaluate the stress distributions according to numbers and location of implants in three-unit fixed partial dentures. A mandible missing the right second premolar, first molar and second molar was modeled. Using the CT data. we modeled a mandible with a width of 15mm, a height of 20mm and a length of 30mm, 2mm-thickness cortical bone covering cancellous bone mallow. An internal type implant and A solid type abutment was used. A model with 3 implants placed in a straight line, offset 1.5 mm buccally, offset 1.5 mm lingually and another model with 3 implants offset in the opposite way were prepared. And models with 2 implants were both end support models, a mesial cantilever model and a distal cantilever model. Three types of loading was applied; a case where 155 N was applied solely on the second premolar, a case where 206 N was applied solely on the second molar and a case where 155 N was applied on the first premolar and 206 N was applied on the first and second molar. For all the cases, inclined loads of 30 degrees were applied on the buccal cusps and vertical loads were applied on the central fossas of the teeth. Finite element analysis was carried out for each case to find out the stress distribution on bones and implants. This study has shown that prostheses with more implants caused lower stress on bones and implants, no matter what kind of load was applied. Furthermore, it was found out that inclined loads applied on implants had worse effects than vertical loads. Therefore, it is believed that these results should be considered when placing implants in the future.

Effect of Precooling Treatments on the Storability of Chicon during MA Storage (예냉 처리가 치콘의 MA 저장성에 미치는 영향)

  • Jung, Hyun-Jin;Seo, Hyun-Taek;Choi, In-Lee;Yoo, Tae-Jong;Son, Jin-Sung;Won, Jae-Hee;Kim, Il-Seop;Kang, Ho-Min
    • Journal of Bio-Environment Control
    • /
    • v.19 no.4
    • /
    • pp.360-365
    • /
    • 2010
  • The effects of precooling treatments on the storability of chicon were investigated during modified atmosphere (MA) storage. The forced air cooling showed faster precooling rate that reduced the internal temperature of chicon to $2{\pm}1^{\circ}C$, and the precooling time of forced air cooling was 1/6 of room cooling. The half cooling time was 3 hr 21 min in room cooling and 1 hr 17 min in forced air cooling. Weight loss was less than 0.5% in all treatments both $5^{\circ}C$ and $10^{\circ}C$ MA storage and maintained higher in forced air cooling treatment. The concentration of carbon dioxide, oxygen, and ethylene of $50{\mu}m$ ceramic film packages were observed higher at $10^{\circ}C$ than $5^{\circ}C$. The precooling effect on respiration reduction was not shown at $5^{\circ}C$, but appeared that the gas concentration of precooling treatments showed less carbon dioxide and higher oxygen than non precooling treatment by 9 days after $10^{\circ}C$ storage. Ethylene concentration of precooling treatments showed lower than non precooling treatment until 3 days both $5^{\circ}C$ and $10^{\circ}C$ MA storage. Precooling showed the effect on maintaining visual quality of chicon both $5^{\circ}C$ and $10^{\circ}C$ MA storage. However, the forced air cooling that showed faster precooling rate did not appeared more precooling effect on the visual quality than room cooling because the fast air flow (6.0 m/sec) of forced air cooling hit directly on chicon outer leaves and might cause physical damage to chicon. Although the forced air cooling showed the effect on maintaining quality of chicon, but additional studies should be needed that investigated proper air flow rate and cooling box structure can prevent physical damage by air flow.

Habitats Environmental and Population Characteristics of Iris koreana Nakai, a Rare and Endemic Species in Korea (한반도 희귀·특산식물 노랑붓꽃의 자생지 환경 및 개체군 특성)

  • Pi, Jung-Hun;Park, Jeong-Geun;Jung, Ji-Young;Park, Jeong-Seok;Suh, Gang-Uk;Son, Sung-Won
    • Korean Journal of Ecology and Environment
    • /
    • v.49 no.2
    • /
    • pp.102-109
    • /
    • 2016
  • The sustainability of Iris koreana, a rare and endemic plant designated by the Korea Forest Service, is threatened due to artificial factors such as habitats loss and climate change etc. and internal factors such as changes in biological properties of the habitats etc. but conservation biology research has not been performed in South Korea. The objective of this study is to establish the species conservation strategies by analyzing the characteristics of their habitats, including: 1) Population characteristics, and 2) habitat analysis of the vegetation and abiotic environments. From April to May, 2015, population characteristics [density (stems $m^{-2}$), flowering rate (%) and leaf area size ($cm^2$)] in I. koreana habitats such as Buan1~6 (BA1~6), Jangseong1~2 (JS1~2) and vegetation characteristics (phytosociological research and ordination analysis), and abiotic environments [soil temperature ($^{\circ}C$), soil humidity (%), transmitted light ($mol{\cdot}m^{-2}{\cdot}d^{-1}$) and canopy openness (%)] were measured. I. koreana was mainly distributed at elevation 50 to 150 m and 2 to $11^{\circ}$ slope. Slope direction was shown as 90 to $193^{\circ}$. The average degree of canopy openness was 11.9%. It showed the highest at BA2 (17.5) and the lowest at JS1 (7.7). The average degree of transmitted light was $6.3mol{\cdot}m^{-2}{\cdot}d^{-1}$. It showed the highest at BA2 (10.1) and the lowest at JS1 (3.6). Population density showed average 25.8 (stems $m^{-2}$). It showed the highest at JS2 (19.7) and the lowest at JS1 (9.3). flowering stems showed average 16.9 (stems). It showed the highest at BA3 (35) and the lowest at BA5 (4). Leaf area size was average $94.1cm^2$.

Development of Low-fat Meat Processing Technology using Interaction between Meat Proteins and Hydrocolloids-II Development of Low-fat Sausages Using the Results of Model Study (식육단백질과 친수성 콜로이드의 상호결합 특성을 이용한 저지방 육제품 제조기술 개발 - II 모델연구결과를 이용한 저지방 소시지의 개발)

  • Chin, Koo-Bok;Lee, Hong-Chul
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.31 no.4
    • /
    • pp.629-635
    • /
    • 2002
  • This study was performed to develop low-fat comminuted sausages (LFSs, < 3%) manufactured with 1% single (Konjac flour, KF; kappa-carrageenan, k-CN and Locust bean gum, LBG) or mixed hydrocolloids and to select the best combination which had similar textural characteristics to those with regular-fat (~25% fat) control. In experiment 1, LFSs were formulated with each 1% hydrocolloid, smoked and cooked to an internal temperature of 71.7$^{\circ}C$. The pH range of LFSs was 6.29 to 6.34 and approximately 23~24% of fat was removed in the final products, resulting in the higher moisture and protein contents (%) in LFSs, as compared to regular-fat control. No differences (p>0.05) in cooking loss (CL, %), expressible moisture (EM, %), and hunter color values (L, a, b) were observed with the addition of each 1% hydrocolloid. However, LFSs containing 1% k-CN had textural hardness values similar to those with low-/regular-fat controls, whereas LFSs having either KF or LBG had similar cohesiveness values to those with regular-fat counterpart. Tn experiment 2, two or three mixed hydrocolloids were added to the low-fat sausage formulation. The addition of mixed KF+LBG (KLL) and KF+CN+LBG(KCL) reduced EM and textural hardness values, as compared to low-fat control. Among the treatments, LFSs containing two or three combinations of CN with KF or/and LBG had similar textural characteristics to those with regular-fat control. These results suggested that multiple addition of CN with other hydrocolloids (KF or LBG) for the replacement of fats in LFSs would be recommended for the proper functional and textural properties.

Habitats Environmental and Population Characteristics of Cypripedium japonicum Thunb., a Rare Species in Korea (희귀식물 광릉요강꽃 자생지 환경 및 개체군 특성)

  • Pi, Jung-Hun;Jung, Ji-Young;Park, Jeong-Geun;Yang, Hyung-Ho;Kim, Eun-Hye;Suh, Gang-Uk;Lee, Cheul-Ho;Son, Sung-Won
    • Korean Journal of Ecology and Environment
    • /
    • v.48 no.4
    • /
    • pp.253-262
    • /
    • 2015
  • The sustainability of Cypripedium japonicum, a rare plant designated by the Korea Forest Service, is threatened due to artificial factors such as habitat loss and climate change etc. and internal factors such as changes in biological properties of the habitat etc. but conservation research has not been performed in South Korea. The objective of this study is to establish the species conservation strategies by analyzing the characteristics of their habitats, including: 1) Population characteristics, and 2) habitat analysis of the vegetation and abiotic environments. From April to September, 2014, population characteristics [density (stems $m^{-2}$), flowering rate (%), and leaf area ($cm^2$)] in Cypripedium japonicum habitats such as Chuncheon (CC), Hwacheon (HC), Muju (MJ), and Gwangyang (GY) and vegetation characteristics (plant sociological research and ordination analysis), and abiotic environments [temperature ($^{\circ}C$), relative humidity (%), transmitted light ($mol{\cdot}m^{-2}{\cdot}d^{-1}$) and canopy openness (%)] were measured. Cypripedium japonicum was mainly distributed at elevation 450 to 990 m and 5 to $30^{\circ}$ slope. Slope direction was shown as 0 to $110^{\circ}$. Habitats temperature (mean $18.94^{\circ}C$) was well matched to seasonal changes. Differences among sites showed greater level according to latitude difference. It showed the highest in habitat, GY located in the South. On the other hand, relative humidity (77.38%) didn't show much difference among sites. The average degree of canopy openness was 18.17%. It showed the highest at HC (22.1%) and the lowest at MJ (16.1%). The average degree of transmitted light was $9.1mol{\cdot}m^{-2}{\cdot}d^{-1}$. It showed the highest at CC ($10.6mol{\cdot}m^{-2}{\cdot}d^{-1}$) and the lowest at GY ($6.87mol{\cdot}m^{-2}{\cdot}d^{-1}$). Chlorophyll content showed average 26.12 SPAD. It showed the highest at MJ (30.64 SPAD value) and the lowest at HC (23.69 SPAD value). Leaf area was average $253.35cm^2$. It showed the highest at CC ($281.51cm^2$) and the lowest at HC ($238.23cm^2$).

Effect of various abutment systems on the removal torque and the abutment settling in the conical connection implant systems (원추형 연결 임플란트에서 지대주 종류에 따른 나사풀림과 침하현상에 관한 연구)

  • Lee, Jin-Seon;Lee, Joon-Seok
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.50 no.2
    • /
    • pp.92-98
    • /
    • 2012
  • Purpose: The aim of this study was to evaluate the effects of different abutment materials on abutment screw loosening and settling-down effect in conical connection type implant system. Materials and methods: Three types of abutment, cementation, gold UCLA, and metal UCLA abutment were used. Two UCLA groups were fabricated in a similar pattern to cementation abutment. Type III gold alloy and Nickel-Chromium alloy was used for casting gold UCLA abutment and metal UCLA abutment, respectively. Fixture and abutment were tightened to 30 Ncm by using digital torque controller and re-tightening was conducted with same force after 10 minutes. Digital torque gauge was used to measure loosening torque and fixture/abutment length was measured by digital micrometer. Dynamic loads between 25 N and 250 N were applied with $0^{\circ}$ angle to the abutment axis. After loading, fixture/abutment length was re-measured and amount of settlement was calculated. Loosening torque value was also measured for comparison Results: All three groups showed significant differences of length when comparing before and after loading, but there was no significant difference of settling amount in all groups. Loosening torque values were significantly decreased when comparing before and after loading in all groups($P$<.05). However, there was no significant difference in loss of loosening torque values when compared to groups. Conclusion: In internal conical connection type implants, dynamic load affected on settlement and loosening torque of implant, but there was no differences between abutments materials. Likewise gold UCLA abutment, metal UCLA abutment might be able to withstand functional load.

Retrospective Study about Medical and Surgical Combination Therapy for Advanced Cervical Tuberculous Lymphadenitis (항결핵제와 수술적 병합치료를 시행한 진행된 결핵성 경부 임파선염 환자에 대한 연구)

  • Song, Ha Do;Kim, Chong Kyung;Cho, Dong Il;Hong, In Pyo;Yoo, Nam Soo
    • Tuberculosis and Respiratory Diseases
    • /
    • v.65 no.4
    • /
    • pp.277-284
    • /
    • 2008
  • Background: In principle, cervical tuberculous lymphadenitis (CTBL) is a medical disease that may require surgical treatment, particularly in young women who complain of psychosocial and cosmetic problems. We encountered 13 cases of aggravated CTBL treated surgically despite the appropriate course of antituberculous chemotherapy. We report the clinical characteristis of these cases. Methods: The clinical data of 13 patients with aggravated CTBL requiring surgical treatment from January 2000 to December 2006 at the Department of Chest Medicine, Internal Medicine and Plastic Surgery, National Medical Center was reviewed retrospectively. Results: Twelve of the 13 cases (92%) were female. The most common age was 21~30 years (69%). Multiple nodes were palpated in 11 cases (85%). The supraclavicular lymph nodes were sites the most commonly involved (54%). The other involved sites in the order of decreasing frequency were the jugular chain, posterior cervical, submandibular and infraauricular lymph nodes. A palpable mass was the most commonsymptom. Neck pain was reported in 3 cases (23%). General symptoms such as weight loss, fatigue, anorexia and night sweats were noted in 5 cases (38%). Respiratory symptoms such as cough, sputum, hemoptysis, dyspnea and chest pain were observed in 4 cases (31%). Pulmonary tuberculosis was noted in 11 cases (85%). Other extrapulmonary tuberculosis coexisted in 4 cases (31%). This suggests that surgical CTBLs may be manifestations of a systemic disease and might be difficult to treat. Most cases (92%) were stages 2 and 3 at the initial diagnostic period but all cases fell into stage 4 and 5 when reassesed before surgery. The average duration of anti-TB chemotherapy before and after surgery was 10.2 and 15.2 months, respectively. The 13 patients were followed up until June. 2008. Among them, 2 cases had newly developed CTBL and the other 11cases showed no recurrence. Conclusion: In principle, CTBL is the medical disease. However, despite the appropriate course of anti-TB chemotherapy, CTBL can progress to a more advanced stages and grow rapidly to a large-sized or fistulous mass with a persistent abscess. Surgical treatment may be inevitable for patients with psychosocial and cosmetic problems caused by these masses, particularly in young women.

A Study on the Characteristic of Pollutants of Water Quality and Sediments in Gul-po Stream Basin (굴포천 유역 내 수질 및 퇴적물의 오염물질 특성 파악에 관한 연구)

  • Ahn, Tae-Woong;Jung, Jae-Hoon;Kim, Tae-Hoon;Kim, Sea-Won;Choi, I-Song;Oh, Jong-Min
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.34 no.7
    • /
    • pp.495-503
    • /
    • 2012
  • The water quality of Gul-po Stream, the subject of this study, has been deteriorating because of the inflow of domestic sewage and the industrial wastewater due to industrialization and the problems relating to the structure of river including slow flow rate and the covering of river. In particular, the domestic sewage from small-medium sized factories by the river and large-scale industrial complex by the upper and middle streams of the river, and the domestic sewage from increasing population due to the regional development are the main pollution sources. Thus, this study aims to survey the water quality and the sediment affecting Gul-po Stream; monitor the state of pollution in water body; assess the yield of sediment and investigate the water quality of river and the problems arising from sediment; and then suggest reasonable ways to improve the situation. The findings from surveying pollution load shows the discharge increases up to average 72.8 times from the upper stream to the downstream of Gul-po Stream, and pollution load increases up to: SS 111 times, BOD 150 times, COD 145 times, the nutrient T-N 222 times and T-P 312 times on an average basis. As for the pollution concentration range, ignition loss is 1.29~12.43%; COD is 4,015~37,547 kg/day; T-N and T-P 94.8~352.5 kg/day and 81.8~372.3 kg/day, respectively. As for the releasing rate of sediment, T-N is -14.46~$156.61mg/m^2/day$; T-P is -11.53~$26.10mg/m^2/day$, indicating the likelihood of internal contamination due to the elution of sediment. This study is expected to be used as basic data to manage Gul-po Stream basin.

Literatual Study on Etiological Analysis, Pathogenesis and Acupuncture Treatment of Edema (수종(水腫)의 병인병기(病因病機) 및 침구치료(鍼灸治療)에 대한 문헌적(文獻的) 고찰(考察))

  • Oh, Chang-rok;Na, Gun-ho;Choi, Bong-gyun;Yoon, Jung-sun;Lyu, Chung-yeol;Cho, Myung-rae
    • Journal of Acupuncture Research
    • /
    • v.22 no.3
    • /
    • pp.253-270
    • /
    • 2005
  • Objective : The purpose of this study is to establish a category for acupuncture therapy by appropriate etiological analysis and differenciation of edema. Methods : We arrange Huang Di Nei Jing and thirty four kinds of literature about edema. Results : 1. The cause of Edema is functional disorder of lung, spleen, kidney, bladder and tri-energizer by six kinds of natural factors, internal injury and loss of nutritions. 2. Edema compartmentalize into the water of five zang organs, several kinds of edema(e,g. 5, 10, 12, 24) and yang & yin edema. 3. An ultimate cause of edema pathogenesis is the disturbance of Qi function in kidney. 4. In view of the results so far achived,'GV26(水淸)' is a vitally important acupoint in acupuncture treatment of edema.'GV26(水淸)' and 'CV9(水分)' are very useful acupoints in moxibustion. 5. In the acupuncture and moxibustion treatment of yang edema, we can use acupoints as like 'GV26(水溝)', 'S36(足三里)', 'B20(脾兪)' and 'SP9(陰陵泉)' by purgation and reduction for expelling wind, reducing fever and eliminating dampness. In an instance of yin edema, we can use acupoints as like 'CV9(水分)' 'S36(足三里)', 'CV6(氣海)', 'B20(脾兪)', 'B23(腎兪)' and 'K3(太谿)' by reinforcement for tonifying spleen yang-middle energizer-, qi-transmission and water promoting.

  • PDF

The role of the pulmonary function test and the exercise test for assessing impairment/disability in patients with chronic airflow obstruction (심한 만성기류폐쇄 환자의 Impairment/Disability 측정에 있어 폐기능검사 및 운동부하검사의 역할)

  • Cheon, Seon-Hee
    • Tuberculosis and Respiratory Diseases
    • /
    • v.43 no.3
    • /
    • pp.377-387
    • /
    • 1996
  • Background : In 1980, WHO made a definition in which the term "impairment" as applied to the respiratory system is used to describe loss of lung function, "disability" the resulting diminution in exercise capacity. The measurement of pulmonary function during exercise would give us information about overall functional capacity and respiratory performance that would be lacking in tests performed at rest. We conducted this study to investigate the role of resting pulmonary function test and exercise test for assessing impairment/disability in patients with chronic airflow obstruction(CAO). Method : We studied 19 patients with CAO. The spirometry and body plethysmograph were performed in stable condition. And then patients performed a progressive incremental exercise test to a symptom-limited maximum using cycle ergometer. Patients were divided in two groups, severe and non-severe impairment, according to the resting PFTs and compaired each other. A patient was considered to be severely impaired if FVC < 50 %, FEV1 < 40 % or FEV1/FVC < 40 %. Results : 1) The airway obstruction and hypoxemia of severe impairment group were more severe and exercise performance was markedly reduced compairing to non-severe impairment group. 2) The severe impairment group showed ventilatory limitation during exercise test and the limiting symptomes ware dyspnea in 9/10 patients. 3) The impairment and disability of the patients with tuberculous destructed lung were most marked in patients with CAO. 4) The FEV1 was the most prevalent criterion for the determination of severe impairment based on resting PFTs and was the valuable best correlated to V02max(r=0.81, p < 0.001). 5) The sensitivity of exercise limits for predicting severe disability according to resting PFTs was 80 % and specificity 89 %. Conclusion : In patients with severe CAO, FEV1 is a good predictive of exercise performance and impairment measured by resting PFTs can predict a disability by exercise test.

  • PDF