• 한국레이저가공학회지
• /
• 제14권1호
• /
• pp.1-5
• /
• 2011

Photo-induced gratings m flexible PDMS (polydimethly siloxane) film are directly written by a high-intensity femtosecond (130fs) Ti: Sapphire laser (${\lambda}_p$ = 800nm). The refractive index modifications with $4\;{\mu}m$ diameters were photo-induced after the femtosecond irradiation with peak intensities of more than $1{\times}10^{11}W/cm^2$. The graded refractive index profile was fabricated to be a symmetric around the center of the point at which femtosecond laser by controlling both laser power and focused depth. The change on refractive index in the laser-modified regions was estimated to be approximately $10^{-3}$. The internal flexible symmetric diffraction gratings in PDMS film was successfully fabricated using a femtosecond laser.

• 한국레이저가공학회지
• /
• 제15권1호
• /
• pp.15-19
• /
• 2012

The fabrication of internal diffraction gratings with photoinduced refractive index modification in transparent materials was demonstrated using low-density plasma formation excited by a femtosecond (130 fs) Ti: sapphire laser (${\lambda}_p$=800 nm). The refractive index modifications with diameters ranging from $1{\mu}m$ to $3{\mu}m$ were photoinduced after plasma formation occurred upon irradiation with peak intensities of more than $2.0{\times}10^{13}W/cm^2$. The graded refractive index profile was fabricated to be a symmetric around from the center of the point at which low-density plasma occurred.

• 한국전기전자재료학회논문지
• /
• 제22권12호
• /
• pp.1014-1017
• /
• 2009

In this study, we studied the nature of thin films formed by holographic photodoping chalcogenide thin films with for use in programmable metallization cell devices(PMC), a type of ReRAM. We formatted straight conduction pathway from the internal interferences of the diffraction gratings which is builded by the holographic lithography method. We investigated the resistance change of solid-electrolyte chalcogenide thin films varied in the applied voltage bias direction from about $1\;M{\Omega}$ to several hundreds of $\Omega$. The switching characteristics of the devices applied holographic lithography method was more improved than ultraviolet exposure condition. As a result of improved resistance change effects, we can analogize that the diffraction gratings is a kind of pattern for straight conduction pathway formation inside the chalcogenide thin films.

• 대한기계학회논문집A
• /
• 제28권5호
• /
• pp.489-494
• /
• 2004

Long Period Gratings (LPG) is currently receiving considerable attention because of their consistent measuring results fur pressure, temperature, strain and flow. LPG is easier to prepare and has a high sensitivity compared with Fiber Bragg Gratings (FBG). In addition, this kind of optical fiber sensors could be used for implementations in various structures. In this paper, LPG was used to monitor in situ the resin flow and the curing process in VARTM (Vacuum Assisted Resin Transfer. Molding). In order to demonstrate the effectiveness of the method, FBG is inserted into the glass mat to monitor the resin flow using optical spectrum analyzer (OSA). The curing reactions in VARTM are also observed using the same method. From the results, the attenuation wavelength shift and the loss change of attenuation band can be obtained from the status of the RTM (Resin Transfer Molding) sample owing to the internal variations of the .effective index, temperature, and pressure. It is shown that the proposed LPG is more effective in monitoring the curing reaction than FBG.

• 대한기계학회논문집A
• /
• 제33권8호
• /
• pp.793-798
• /
• 2009

In this paper, the simulation and optimization of SRH (Surface Relief Hologram) masks for printing LCD gate patterns using TIR (Total Internal Reflection) holographic lithography was investigated. A simulation and optimization algorithm based on SDTA (Scalar Diffraction Theory Analysis) method was developed. The accuracy of the algorithm was compared to that of the RCWA (Rigorous Coupled Wave Analysis) method for estimating the Fresnel diffraction pattern of Cr amplitude masks for the given system geometry. In addition, the results from the optimization algorithm were validated experimentally. It was found that one to the most important conditions for the fabrication of SRH masks is to avoid nonlinear shape distortions of the resulting grating. These distortions can be avoided by designing SRH masks with recorded gratings having small aspect ratios of width versus depth. The optimum gap size between the Cr and SRH masks was found using the optimization algorithm. A printed LCD gate pattern with a minimum line width of $1.5{\mu}m$ exposed using the optimized SRH mask was experimentally demonstrated.

• Journal of the Optical Society of Korea
• /
• 제16권3호
• /
• pp.196-202
• /
• 2012

We observe that the transmission and reflection efficiencies of a one-dimensional metallic grating under transverse-magnetic illumination calculated using the Fourier modal method (FMM) with the Fourier factorization rules have peculiar fluctuations, albeit small in magnitude, as the number of field harmonics increases. It is shown that when the number of Fourier terms for the electromagnetic field is increased from that in the conventional FMM, the fluctuations due to non-convergent highly evanescent eigenmodes can be eliminated. Our examination reveals that the fluctuations originate from the Gibbs phenomenon inherent in the Fourier-series representation of a permittivity function with discontinuities, and from non-convergence of highly evanescent internal Bloch eigenmodes.