• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 추계학술발표대회 논문집
• /
• pp.259-264
• /
• 2009

Most of the fossil power plants firing lower grade coals are challenged with maintaining good combustion conditions while maximizing generation and minimizing emissions. In many cases significant derate, availability losses and increase in unburned carbon levels can be attributed to poor combustion conditions as a result of poorly controlled local fuel and air distribution within the boiler furnace. The poor combustion conditions are directly related to the gas flow deviation in upper furnace and convection tube-bank but a less reported issue related to in large-scale oppose wall fired boilers. In order to develop a on-line combustion monitoring system and suggest an alternative heat flux estimation method at tube bank, which is very useful information for boiler design tool and blower optimizing system, field test was conducted at operating power boiler. During the field test the exhaust gases' temperature and tube metal temperature were monitored by using a spatially distributed sensors grid which located in the boiler's high temperature vestibule region. At these locations. the flue gas flow is still significantly stratified, and air in-leakage is minimal which enables tracing of poor combustion zones to specific burners and over-fire air ports. Test results showed that the flue gas monitoring method is more proper than metal temperature distribution monitoring for real time combustion monitoring because tube metal temp. distribution monitoring method is related to so many variables such as flue gas, internal flow unbalance, spray etc., Heat flux estimation at the tube bank with flue gas temp. and metal temp. data can be alternative method when tube drilling type sensor can't able to use.

• KEPCO Journal on Electric Power and Energy
• /
• 제8권1호
• /
• pp.5-7
• /
• 2022

KEPCO's plan is undergoing a trial operation to replace the open-loop section with ring main units configuration where underground distribution lines are installed, by linking the multi-way circuit breakers auto (MCA) on the power side of each pad-mounted transformer. However, ring main units application mentioned above may cause the ripple effects, when implementing the configuration without a study of protection coordination. Because ring main units with classical pre-set protection devices contribution in fault condition didn't consider yet. For the reliable ring main units operation, it is necessary to resolve several protection issues such as the protection coordination with substation side, prevention of the transformer inrush current. These issues can radically deteriorate the distribution system reliability Hence, it is essential to design proper protection coordination to reduce these types of problems. This paper presents a scheme of ring main units' configuration and MCA's settings of time-current curves to preserve the performance of protection coordination among the switchgears considering constraints, e.g. prevention of the ripple effects (on the branch section when a transformer failure occurs and the mainline when a branch line failure occurs). It was confirmed that the propagation of the failure for each interrupter segment could be minimized by applying the proposed TCC and the interrupter settings for the MCAs (branch, transformer). Further, it was verified that the undetected area of the distribution automation system (DAS) could be supplemented by having the MCA configurated ring main units operate first, instead of the internal protection equipment in the transformer such as the fuse, STP when a transformer failure occurs.

• 대한화학회지
• /
• 제19권5호
• /
• pp.331-338
• /
• 1975

크롬산염, 중크롬산염, 요오드산염 및 과요드산염의 중성자포획에 수반하는 크롬-51 및 요오드-128 반조 화학종의 분배를 거름종이 전기영동법으로 검토하였다. 유효반조에너지 및 내부전환의 관점에서 생각하면 중성자 포획원자가 초기분자중에 잔유하고 반조원자에너지가 결정의 적은 범위를 가열하며 소멸된다고 하기 어렵다. 그러나 거름종이 전기영동결과 더 많은 크롬-51 및 요오드-128 반조원자가 어미분자와 결합되어 있음을 알 수 있었다. 잔류율의 관찰결과 반응 이론을 Disorder Model로 설명하였다. 양이온 반경이 클수록 2차 cage를 돌파하는 반조원자의 확율이 높다. 암모늄염중 암모늄이온은 disorder zone에서 환원작용을 하며 잔류율이 낮어졌다. 결정구조에서 자유공간이 크면 잔류율이 낮어졌다.

• Radiation Oncology Journal
• /
• 제1권1호
• /
• pp.41-45
• /
• 1983

To obtain 7 MeV electron beam which is suitable for treatment of the chest wall after radical of modified radical mastectomy, the authors reduced the energy of electron beam by means by Lucite plate inserted in the beam. To determine the proper thickness of the Lucite plate necessary to reduce the energy of 9 MeV electron beam to 6 MeV, dosimetry was made by using a parallel plate ionization chamber in polystyrene phantom. Separation between two adjacent fields, 7 MeV for chest wall and 12 MeV for internal mammary region, was studied by means of film dosimetry in both polytyrene phantom and Humanoid phantom. The results were as follows. 1. The average energy of 9 MeV electron beam transmitted through the Lucite plate was reduced. Reduction was proportional to the thickness of the Lucite plate in the rate of 1.7 MeV/cm. 2. The proper thickness of the Lucite plate necessary to obtain 6 MeV electron beam from 9 MeV was 1.2 cm. 3. 7 MeV electron beam, 80% dose at 2cm depth, is adequate for treatment of the chest wall. 4. Proper separation between two adjacent electron fields, 7 MeV and 12 MeV, was 5mm on both flat surface and sloping surface to produce uniform dose distribution.

• Nutritional Sciences
• /
• 제6권1호
• /
• pp.42-47
• /
• 2003

The objective of this study was to examine how circulating leptin concentrations and resting energy expenditures (REE) are related to body composition in obese adults, and to examine differences in these parameters according to gender. Twenty-three subjects, 6 males and 17 females, were recruited from patients with a body mass index (BMI) of greater than 27 at the Obesity Clinic of the K University Hospital. Anthropometric assessments and biochemical analyses were performed, and REEs were measured. In spite of having similar BMI values the plasma leptin levels of females (20.0$\pm$6.5 ng/ml) were significantly higher (p<.05) than those of males (14.2$\pm$6.1) ng/ml). In females, plasma leptin concentrations were found to be positively related to body weight. BMI, waist-hip ratio (WHR), fat mass (FM), body fat, and to the circumferences of forearm, waist and hip (p<.0001). However, in males, plasma leptin concentrations were positively related only to suprailiac thickness (p<.05). The higher plasma leptin levels in females compared to males may, at least partially. be explained by the females' higher subcutaneous fat mass. Plasma leptin concentrations appeared to reflect not only total fat mass but also regional fat distribution, especially in females. REE values of males (2254.3$\pm$256.2 kcal/day) were significantly higher (p＜.01) than those of females (1799.1$\pm$454.7 kcal/day). REE values for females were positively related to body weight, BMI, lean body mass (LBM), FM, body fat, and to the circumferences of waist and hip (p<.05); however, REE values for males were (positively) related only to LBM (p<.05). REE values were not related to plasma leptin concentrations for either males or females, indicating that the plasma level of leptin might not be a predictor for REE value.

• 전기전자학회논문지
• /
• 제19권2호
• /
• pp.219-224
• /
• 2015

전기 임피던스 단층촬영 기법은 전극들을 통해 전류를 주입하고 이에 유기되는 전압을 측정한 후, 이들 데이터를 기반으로 내부의 도전율 분포를 영상으로 복원하는 방법이다. 이 논문에서는 기존의 Gauss-Newton 방법의 역행렬 항목의 차원을 도메인의 원소의 개수가 아닌 데이터의 개수의 차원으로 바꿔줌으로써, 관심 도메인 내부의 도전율 분포를 보다 빠르게 추정할 수 있는 방법을 제안하였다. 그리고 자코비안 행렬의 대각성분의 최소-최대를 이용하여 조정인자를 계산하는 방법을 함께 제안하였다. 몇 가지 시나리오를 설정하고 모의실험을 통해 제안한 방법의 복원 성능을 비교분석하였다.

• Nuclear Engineering and Technology
• /
• 제55권11호
• /
• pp.4274-4281
• /
• 2023

Blanket is of vital importance for engineering application of the fusion reactor. Nuclear heat deposition in materials is the main heat source in blanket structure. In this paper, the three-dimensional method for thermal-hydraulics/neutronics coupling analysis is developed and applied for the full-scale module of the helium-cooled ceramic breeder tritium breeding blanket (HCCB TBB) designed for China Fusion Engineering Test Reactor (CFETR). The explicit coupling scheme is used to support data transfer for coupling analysis based on cell-to-cell mapping method. The coupling algorithm is realized by the user-defined function compiled in Fluent. The three-dimensional model is established, and then the coupling analysis is performed using the paralleled Coupling Analysis of Thermal-hydraulics and Neutronics Interface Code (CATNIC). The results reveal the relatively small influence of the coupling analysis compared to the traditional method using the radial fitting function of internal heat source. However, the coupling analysis method is quite important considering the nonuniform distribution of the neutron wall loading (NWL) along the poloidal direction. Finally, the structure optimization of the blanket is carried out using the coupling method to satisfy the thermal requirement of all materials. The nonlinear effect between thermal-hydraulics and neutronics is found during the blanket structure optimization, and the tritium production performance is slightly reduced after optimization. Such an adverse effect should be thoroughly evaluated in the future work.

• 소성∙가공
• /
• 제27권2호
• /
• pp.123-129
• /
• 2018

In the present study, the mechanical behavior of the spray-formed high speed steel was investigated employing the internal variable theory of inelastic deformation. Special attention was focused on the effect of the microstructure evolution during the hot working process, such as the distribution of carbides to provide a basic database for the production condition of high speed steels with excellent properties. The billets of high speed steel ASP30TM were fabricated by a spray forming, and the subsequently hot-rolled and heat-treated process to obtain uniformly distributed carbide structure. As noted the spray-formed high speed steel showed relatively coarser carbides than hot-rolled and heat-treated one with fine and uniformly distributed carbide structure. The step strain rate tests and high temperature tensile tests were carried out on both the spray-formed and the hot-rolled specimens, to elucidate their high temperature deformation behavior. The spray-formed high speed steel showed much higher flow stress and lower elongation than the hot-rolled and heat-treated steel. During the tensile test at $900^{\circ}C$, the interruption of the deformation for 100 seconds was conducted to reveal that the recovery was a main dynamic deformation mechanism of spray formed high speed steel. The internal variable theory of the inelastic deformation was used to analyze data from the step strain rate tests, revealing that the activation energies for hot deformation of as-spray-formed and hot-worked steels, which were 157.1 and 278.9 kJ/mol, and which were corresponding to the dislocation core and lattice diffusions of ${\gamma}-Fe$, respectively.

• 대한한의학회지
• /
• 제26권1호
• /
• pp.85-92
• /
• 2005

Objective: A number of candidate genes have been in implicated in the pathogenesis of obesity in humans. Tumor necrosis factor-alpha $(TNF-{\alpha})$ is expressed primarily in adipocytes, and elevated levels of this cytokine have been linked to obesity and insulin resistance. Recently, the A allele of a polymorphism at position 308 in the promoter region of $TNF-{\alpha}$ (G-308A) has been shown to increase transcription of the gene in adipocytes. Therefore, we designed this study to test whether obese and non-obese subjects differ in $TNF-{\alpha}$ genotype distribution, and how the genotypes affect anthropometric parameters, including degrees of body mass index (BMI). Methods : The study included 153 obese but otherwise healthy women ($BMI{\geq}kg/m^2$, range 25-54.7, age range 15-40 years) and 82 non-obese healthy women ($BMI, age range 15-40 years). Total fat mass and percent body fat were determined by dual-energy X-ray absorptiometry. Genomic DNA was extracted and used for Ncol restriction fragment length polymorphism (RFLP) based genotyping of $TNF-{\alpha}$. Results: No differences were observed for allelic and genotype frequencies between the obese ($BMI{\geq}25$) and non-obese women. Also, no association of TNF-(l polymorphism was observed with body mass index (BMI) for genotype in obese women. In addition, age, pertent body fat, BMI, and cholesterol levels did not differ by $TNF-{\alpha}$ genotype. However, waist-to­hip ratio (WHR) was significantly lower in subjects with $TNF-{\alpha}$ GA or AA genotype (0.94 0.07 vs. 0.920.03, P<0.005). Conclusion: These results suggest that $TNF-{\alpha}$ promoter polymorphism at position-308 is not a significant factor for BMI, but affects the WHR in obese healthy women from Koreans.

• 대한본초학회지
• /
• 제34권1호
• /
• pp.1-11
• /
• 2019

Objective : An allergy to peanuts is a major cause of fatal food-induced anaphylaxis, with food allergies becoming an increasingly important health research issue. Food allergy as clinical entity has been recongnized for many years, although there is yet no general concord as to the incidence of this symptom.1) Methods : This study was undertaken to verify the effect of seeds of Canavalia gladiata (Jacq.) DC. extract (CGE) on the inhibition of allergic reactions using a cholera toxin and peanut extract-immunized food allergy mouse model. We determine whether the changes in rectal temperature were related to energy consumption owing to heat production in the body. Mast cell distribution and degranulation in the dermis and epidermis were observed with an optical microscope. Subsequently, Ara h1 levels in serum and interleukin (IL)-4, IL-10, and $IFN-{\gamma}$ levels in cultured supernatants of splenocytes were measured. Results : CGE treatment significantly attenuated the secretion of the Ara h1 antibody in serum and splenocytes. Ara h 1 was undetected in the cholera toxin and peanut extract-immunized food allergy mouse model. Improvement in ear tissue inflammation symptoms was the CGE experimental group. In the control group and peanut extract control group, the expression of mast cells was higher, whereas that in the CGE experimental group was significantly lower. Conclusion : CGE causes suppression in a food allergy mouse model via the inhibition of Ara h1 secretion, and might be useful for developing functional health foods.