• Clinics in Shoulder and Elbow
• /
• 제25권4호
• /
• pp.282-287
• /
• 2022

Background: Muscular forces drive proximal humeral fracture deformity, yet it is unknown if arm position can help mitigate such forces. Our hypothesis was that glenohumeral abduction and humeral internal rotation decrease the pull of the supraspinatus and subscapularis muscles, minimizing varus fracture deformity. Methods: A medial wedge osteotomy was performed in eight cadaveric shoulders to simulate a two-part fracture. The specimens were tested on a custom shoulder testing system. Humeral head varus was measured following physiologic muscle loading at neutral and 20° humeral internal rotation at both 0° and 20° glenohumeral abduction. Results: There was a significant decrease in varus deformity caused by the subscapularis (p<0.05) at 20° abduction. Significantly increasing humeral internal rotation decreased varus deformity caused by the subscapularis (p<0.05) at both abduction angles and that caused by the supraspinatus (p<0.05) and infraspinatus (p<0.05) at 0° abduction only. Conclusions: Postoperative shoulder abduction and internal rotation can be protective against varus failure following proximal humeral fracture fixation as these positions decrease tension on the supraspinatus and subscapularis muscles. Use of a resting sling that places the shoulder in this position should be considered.

• Bulletin of the Korean Chemical Society
• /
• 제28권10호
• /
• pp.1705-1708
• /
• 2007

Geometric manipulation of molecules is an essential elementary component in computational modeling programs for molecular structure, stability, dynamics, and design. The computational complexity of transformation of internal coordinates to Cartesian coordinates was discussed before.1 The use of rotation matrices was found to be slightly more efficient than that of quaternion although quaternion operators have been widely advertised for rotational operations, especially in molecular dynamics simulations of liquids where the orientation is a dynamical variable.2 The discussion on computational efficiency is extended here to a more general case in which bond angles and sidechain torsion angles are allowed to vary. The algorithm of Thompson3 is derived again in terms of quaternions as well as rotation matrices, and an algorithm with optimal efficiency is described. The algorithm based on rotation matrices is again found to be slightly more efficient than that based on quaternions.

• Clinics in Shoulder and Elbow
• /
• 제27권1호
• /
• pp.59-71
• /
• 2024

Background: Restoration of external (ER) and internal rotation (IR) after Grammont-style reverse shoulder arthroplasty (RSA) is often unreliable. The purpose of this systematic review was to evaluate the influence of RSA medio-lateral offset and subscapularis repair on axial rotation after RSA. Methods: We conducted a systematic review of studies evaluating axial rotation (ER, IR, or both) after RSA with a defined implant design. Medio-lateral implant classification was adopted from Werthel et al. Meta-analysis was conducted using a random-effects model. Results: Thirty-two studies reporting 2,233 RSAs were included (mean patient age, 72.5 years; follow-up, 43 months; 64% female). The subscapularis was repaired in 91% (n=2,032) of shoulders and did not differ based on global implant lateralization (91% for both, P=0.602). On meta-analysis, globally lateralized implants achieved greater postoperative ER (40° [36°-44°] vs. 27° [22°-32°], P<0.001) and postoperative improvement in ER (20° [15°-26°] vs. 10° [5°-15°], P<0.001). Lateralized implants with subscapularis repair or medialized implants without subscapularis repair had significantly greater postoperative ER and postoperative improvement in ER compared to globally medialized implants with subscapularis repair (P<0.001 for both). Mean postoperative IR was reported in 56% (n=18) of studies and achieved the minimum necessary IR in 51% of lateralized (n=325, 5 cohorts) versus 36% (n=177, 5 cohorts) of medialized implants. Conclusions: Lateralized RSA produces superior axial rotation compared to medialized RSA. Lateralized RSA with subscapularis repair and medialized RSA without subscapularis repair provide greater axial rotation compared to medialized RSA with subscapularis repair. Level of evidence: 2A.

• Clinics in Shoulder and Elbow
• /
• 제17권4호
• /
• pp.166-174
• /
• 2014

Background: Our study was to determine the effect on shoulder isokinetic muscle strength and muscle endurance in isolated full-thickness supraspinatus tendon tear and combined other rotator cuff tear. Methods: Total of 81 male patients (mean age $57.8{\pm}7.4$ years) who were diagnosed as a full-thickness supraspinatus tendon tear were included. They were classified into isolated or combined tear. The isokinetic muscle strength and muscle endurance were measured using the Biodex multi-joint system $PRO^{(R)}$ (Biodex Medical Systems, Shirley, NY, USA) in following movements: shoulder abduction, adduction, flexion, extension, external rotation, and internal rotation. Then, the difference in muscle function according to the type of tears were assessed. Fifty-seven patients had isolated supraspinatus tendon (mean age $56.9{\pm}7.3$ years). They were classified into either anteroposterior tear or modified mediolateral tear. The size were measured using T2-weighted magnetic resonance imaging scans in sagittal plane. Results: Between subjects categorized into the type of tear, we found significant inter-categorical differences in isokinetic muscle strength during abduction, adduction, flexion, extension, and internal rotation, and in muscle endurance during flexion, extension, and internal rotation. Anteroposterior diameter tear, we did not show significant differences in either isokinetic muscle strength or muscle endurance during any movements. However, with modified mediolateral diameter, we found significant differences with isokinetic muscle strength during adduction, and in muscle endurance the external rotation and internal rotation. Conclusions: We found that a supraspinatus tendon tear associated with more numbers of rotator cuff tears has lower isokinetic muscle strength and muscle endurance than a tear found alone.

• Clinics in Shoulder and Elbow
• /
• 제17권4호
• /
• pp.151-151
• /
• 2014

• 대한물리의학회지
• /
• 제13권2호
• /
• pp.33-41
• /
• 2018

PURPOSE: Femur and tibia alignment in the knee joint is important to the biomechanics of lower limb movement. The purpose of this study was to compare vastus medialis oblique (VMO) and vastus lateralis electromyographic muscle activities according to tibial rotation taping methods. METHODS: Twenty-nine healthy subjects (13 males and 16 females) in the 20s, without knee joint-related diseases or disorders, participated in our study. After identifying each subject's dominant foot, the maximal voluntary isometric contraction (MVIC) was determined using a manual muscle tester. The activity of each target muscle was measured at 50% MVIC in isometric muscle contraction and at a $30^{\circ}$ knee flexion position before and after applying internal and external rotation taping by the Mulligan concept and in the neutral position. Non-elastic tape was used to stabilize the tibia rotation position. RESULTS: In the males, VMO muscle activity was significantly increased in the tibia internal rotation position ($47.2{\pm}14.6$, $mean{\pm}SD$) than in the neutral position ($39.3{\pm}14.9$) (p<.05). CONCLUSION: The results of this study indicate that when applying tibia internal rotation taping in healthy males, VMO muscle activity significantly increases during isometric extension of the knee. Therefore, this study provides a basis for selecting the appropriate taping method, in consideration of the available treatments in clinical practice for patients with knee problems.

• PNF and Movement
• /
• 제18권2호
• /
• pp.255-263
• /
• 2020

Purpose: The purpose of this study was to investigate the effect of proprioceptive neuromuscular facilitation (PNF) lower extremity pattern on the dominant leg on muscle activity of the lower extremity supported by the ground. Methods: The subjects were 20 healthy males living in Busan. All subjects performed four direction PNF lower extremity patterns, and data were collected by surface electromyography from the gluteus medius (GM), tensor fascia latae (TFL), vastus medialis oblique (VMO), vastus lateralis oblique (VLO), and semitendinosus (STD) muscles of the opposite lower extremity during PNF lower extremity pattern. The PNF lower extremity pattern applied to the dominant leg was (1) flexion/adduction/external rotation with knee flexion; (2) extension/abduction/internal rotation with knee extension; (3) flexion/abduction/internal rotation with knee flexion; and (4) extension/adduction/external rotation with knee extension pattern, repeated 3 times per pattern and using the average value of the collected results. Collected muscle activity values were analyzed by one-way ANOVA, and post-hoc Tukey testing was performed to check between-group differences. The statistical significance level was set at α = 0.05. Results: GM and TFL flexion/abduction/internal rotation pattern with knee flexion was significantly higher than other patterns. VMO and VLO extension/adduction/external rotation pattern with knee extension was significantly higher than other patterns. STD flexion/adduction/external rotation pattern with knee flexion was significantly higher than other patterns. Conclusion: The study confirms differences in lower extremity muscle activity for the PNF lower extremity pattern, indicating that selective muscle contraction induction is possible using a pattern appropriate to the purpose of treatment.

• Clinics in Shoulder and Elbow
• /
• 제20권4호
• /
• pp.217-221
• /
• 2017

Background: The purpose of this study was to evaluate the clinical and radiographic outcomes of internal fixation with locking T-plates for osteoporotic fractures of the proximal humerus in patients aged 65 years and older. Methods: From January 2007 through to December 2015, we recruited 47 patients aged 65 years and older with osteoporotic fractures of the proximal humerus. All fractures had been treated using open reduction and internal fixation with a locking T-plate. We classified the fractures in accordance to the Neer classification system; At the final follow-up, the indicators of clinical outcome-the range of motion of the shoulder (flexion, internal rotation, and external rotation) and the presence of postoperative complications-and the indicators of radiographic outcome-the time-to-union and the neck-shaft angle of the proximal humerus-were evaluated. The Paavolainen method was used to grade the level of radiological outcome in the patients. Results: The mean flexion was $155.0^{\circ}$ (range, $90^{\circ}-180^{\circ}$), the mean internal rotation was T8 (range, T6-L2), and the mean external rotation was $66.8^{\circ}$ (range, $30^{\circ}-80^{\circ}$). Postoperative complications, such as plate impingement, screw loosening, and varus malunion were observed in five patient. We found that all patients achieved bone union, and the mean time-to-union was 13.5 weeks of the treatment. The mean neck-shaft angle was $131.4^{\circ}$ at the 6-month follow-up. According to the Paavolainen method, "good" and "fair" radiographic results each accounted for 38 and 9 of the total patients, respectively. Conclusions: We concluded that locking T-plate fixation leads to satisfactory clinical and radiological outcomes in elderly patients with proximal humeral fractures by providing a larger surface area of contact with the fracture and a more rigid fixation.

• Journal of Astronomy and Space Sciences
• /
• 제30권2호
• /
• pp.113-121
• /
• 2013

Heumgyeonggaknu is a water-hammering type automatic water clock which was made by Jang Yeong-Sil in 1438. The water clock that is located in Heumgyeonggaknu consists of Suho which is equipped with 2-stage overflow. Constant water wheel power is generated by supplying a fixed amount of water of Suho to Sususang, and this power is transferred to each floor at the same time. The 1st floor rotation wheel of Gasan consists of the operation structure which has the shape of umbrella ribs. The 2nd floor rotation wheel is made so that the 12 hour signal, Gyeong-Jeom signal, and Jujeon constitute a systematic configuration. The 3rd floor rotation wheel is made so that the signal and rotation of Ongnyeo and four gods can be accomplished. Based on the above conceptual design, this paper analyzed the internal signal generation and power transmission of Heumgyeonggaknu.

• 한국운동역학회지
• /
• 제17권4호
• /
• pp.45-55
• /
• 2007

We investigated the biomechanics and characteristics of shoulder rotator muscles for professional woman volleyball players. The purpose of this study was to analyze the isokinetic peak torque and range of motion for shoulder joint rotation. We measured the strength and ROM of the internal rotation(IR) and external rotation(ER) of shoulders joint for nine professional woman Volleyball players and nine University students with Biodex and Simi-motion. 1. We measured peak torques for the shoulder joint rotator at angular velocities of 60/s and 180/s. It was found that the peak torques were significantly different between the two groups and also between the hands used. 2. At angular velocity of 60/s, IR/ER ratio of the shoulder joint was significantly different depending on the groups and the hands in use. There was a significant difference for 'Dominant side' at angular velocity of 180/s, but no significant difference for 'Non-dominant side' and the controls group. 3. Regarding the ROM of rotation of the shoulder joint group, IR was significantly different between the groups and the hands in use. 4. IR/ER ratio of the shoulder joint for Dominant side was quite different between the groups.