• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2004년도 Proceedings of 2004 Korea-Japan Joint Seminar on Particle Image Velocimetry
• /
• pp.141-145
• /
• 2004

Visualization and PIV measurements of the symmetrical recirculation flow in a nanoliter-sized droplet have been performed using the micro PIV system. The airflow sweeps over the nanoliter-sized liquid droplet fixed in a microchannel and the frictional force drags the liquid on the round interface, which causes the symmetrical recirculation flow in the droplet. The internal recirculation flow in the droplet has been visualized and measured successfully. The results of micro PIV measurement show the maximum speed of the recirculation flow is up to 10 mm/s. The high-speed recirculation can enhance a stirring effect and generate strong shear in the droplet, resulting in acceleration of mixing.

• 한국분무공학회지
• /
• 제16권2호
• /
• pp.90-96
• /
• 2011

Atomized liquid jets from the washing nozzle which configured with recirculation chamber for cleaning hot-zone area are accelerated and impinged on the head lamp surface. Cleaning efficiency of head lamp can be increased with injecting washing fluids into the hot-zone area. Experimental and numerical studies with various design parameters were executed to reveal the relations between internal geometry and internal flow in the washing nozzle. Spray structures were fitted with each of the head lamp surfaces and spray nozzles were optimized to the spray pattern. The recirculation chamber induces a recirculation flow and can be decreased the pressures perturbation inside the chamber. Orifice determines the mass flow rate. When the diameter of orifice is excessively large, it showed an unstable spray pattern. As a nozzle exit angle increases, density distributions are separated with two section. Also, as a protrusion length of nozzle exit increases, spray patterns are spread into a large area and density distributions showed unstable trend.

• 공업화학
• /
• 제29권5호
• /
• pp.613-619
• /
• 2018

본 연구에서는 유입 슬러지에 다양한 전처리 방법과 고액분리장치를 이용한 유출수의 잉여슬러지를 농축 후 내부반송을 적용하여, 중온혐기-고온호기 혼합 슬러지 처리 공정의 슬러지 소화효율과 메탄가스 생성량에 미치는 영향을 비교 검증하였다. 실험실 규모의 혼합 소화공정장치를 제작하여 서로 다른 유입 슬러지 전처리방법을 적용하여 5단계로 실험을 진행하였다. 1단계에서는 열-알칼리처리 전처리를 하여 슬러지를 공급하였고, 2, 3, 4단계에서는 유출수로부터 농축된 잉여슬러지의 내부반송과 각각 열-알칼리처리, 열처리, 알칼리 처리(7일)를 거친 유입 슬러지를 공급하였다. 마지막 5단계에서는 전처리를 하지 않은 슬러지를 공급하였다. 실험 결과, 1단계에서 4단계까지 진행되는 동안 Volatile Suspended Solid (VSS) 제거율은 유입 슬러지 전처리와 내부반송을 적용하는 경우 크게 증가하였으며, 메탄생성량 또한 2단계에서 슬러지 내부반송과 열-알칼리처리 전처리 적용의 경우 285 mL/L/day까지 크게 증가하였다. 한편, 5단계에서 전처리를 하지 않은 슬러지를 공급하였을 경우 VSS 제거율과 메탄 생성량이 크게 감소하였다. 결론적으로, 유입 슬러지의 열-알칼리처리 전처리와 유출수의 농축 잉여슬러지의 내부반송을 통해 복합 슬러지 처리 공정의 슬러지 제거 효율과 메탄생성량을 크게 증가시킬 수 있었다.

• 한국산업융합학회 논문집
• /
• 제23권2_2호
• /
• pp.199-207
• /
• 2020

These days, many different types of valves are developed in the industrial area according to their use purpose. Multiple kinds of valves are installed to control a flow and pressure of the pipe conveying fluid. Valves serve as critical roles in land plants such as power plants. The performance of equipment varies depending on valve characteristics. In this study, the internal flow analysis on Cone-type valve is conducted to analyze flow field and secure a value of the flow coefficient Cv. According to the internal flow analysis, when the flow distribution of the middle cross-section of valve was open 100%, flow field was relatively and smoothly taken out. If it was open 50%, flow recirculation region increased and a little complex flow field occurred. Unlike ball valve or butterfly valve, this valve had flow recirculation in its outlet depending on a valve opening amount. Therefore, it was found that there was no flow recirculation in the outlet of Cone-type valve.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제45회 KOSCO SYMPOSIUM 초록집
• /
• pp.339-340
• /
• 2012

The purpose of this study is to analyse, the basic parameters through experimentally and with CFD modelling, internal recirculation of the flameless combustion of natural gas. The test rig is made up of a vertical combustion chamber of circle cross section. The inner dimensions of the chamber are $0.2m{\times}1m$ (diameter x height). And CFD simulations of the combustion chamber have been performed using FLUENT 14.0. Some results of this study present the basic parameters and data of flameless combustion.

• 한국물환경학회지
• /
• 제18권2호
• /
• pp.189-199
• /
• 2002

Nitrogen, in its various forms, can deplete dissolved oxygen levels in receiving waters, stimulate aquatic growth, exhibit toxicity toward aquatic life and affect the suitability of sewage for reuse. Pilot-scale Rotating Biological Contactor(RBC) experiments were conducted to examine biological nitrification, respectively, of municipal sewage with five different internal recirculation ratios of 0, 1, 2, 3, and 4 using the constant hydraulic loading of $205L/m^2{\cdot}day$. The use of internal recirculation improved nitrification on account of the dilution of biodegradable organic carbon in influent sewage down to 15 mg/L of $SBOD_5$ or less. Ammonium nitrogen of $14.3{\pm}2.4%$ was consumed by cellular assimilation without the occurrence of denitrification. The thickness of biofilm didn't seem effect significantly the nitrification and denitrification. Nitrification with internal recirculation was found to occur using hydraulic loading rate of as high as $205L/m^2{\cdot}day$, which was beyond the generally known values of it.

• 유기물자원화
• /
• 제18권2호
• /
• pp.45-54
• /
• 2010

현재 매립 중인 폐기물 매립지 현장에서 공기주입을 5개월간 하였으며, 일정기간 침출수 주입을 병행하면서 이에 따른 매립지 조기안정화 효과를 관찰하였다. 실험부지 면적은 $24{\times}24m$ 규모이었으며, 부지 내에 3~9 m 깊이에 유공부를 설치한 9개의 공기주입용 수직정을 설치하였다. 매립지를 5개월 간 호기적으로 운전함에 따라 매립지 내부 평균 온도는 $70^{\circ}C$까지 상승하였으며, 매립고의 8 %에 해당하는 침하가 발생하였다. 미생물에 의한 유기물 분해촉진을 위하여 1개월간 $94m^3$의 침출수를 실험부지의 일부 구역에 재순환시킨 결과 일시적으로 매립지 내 지하수위가 상승하였고, 혐기성 환경이 조성되었다. 하지만, 침출수 재순환은 침출수 주입정 주변의 매립지 내부 온도를 급속히 상승시키는 효과를 가져왔다. 그러나 과도한 침출수 주입은 매립지 내부를 냉각시켜 온도 상승을 저하시키는 효과를 나타내므로, 매립지 내부온도 변화를 관찰하면서 침출수 주입량을 조절할 필요가 있으며, 침출수 주입은 간헐적으로 하는 것이 바람직하다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2005년도 연구개발 발표회 논문집
• /
• pp.759-764
• /
• 2005

In this paper, numerical analysis of hydrogen recycle system has been conducted in order to enhance the efficiency of automotive fuel cell. Generally, the excess hydrogen is provided in the automotive fuel cell. Since the non-reaction hydrogen reduces automotive fuel cell efficiency, reuse of the non-reaction hydrogen can be helpful to improve the fuel cell performance. In case of PEM FC, the water vapor is provided to hydrogen from the cathode so that the mixture experiences phase change depending on the changes of pressure and temperature. The internal flow of the mixture in the hydrogen recirculation system of fuel cell was investigated for real flow conditions. The variation of performance, properties and mass fractions of mixture, hydrogen and water-vapor were investigated. This study was performed based on 80KW level automotive fuel cell's recycling system.

• 공업화학
• /
• 제22권2호
• /
• pp.203-208
• /
• 2011

런던협약에 의해 2012년부터는 폐기물 해양투기가 전면 금지될 것이다. 따라서 지상에서의 음식폐기물 처리방법의 모색이 시급한 실정이다. 위 문제의 해결방안은 UASB 공법을 이용하여 음폐수로부터 자원화개발을 하는 것이다. 본 연구에서는 유출수의 재순환 및 내부반송이 유기물 제거효율과 바이오 가스 생성에 미치는 영향을 알아보았다. 25일 동안은 내부순환만 실시하였고, 그 후엔 유출수 재순환을 실시하였다. 실험 결과 운전기간동안 유기물 제거효율은 90% 이상으로 나타났고, 메탄수율은 78~80%로 나타났다. 또한, 유출수 반송을 3 Q 이상으로 반송하여 운전할 경우 수산화나트륨(1 N)의 소모가 없었고, 그 결과 경제적이며 안정적인 운전을 할 수 있었다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2000년도 유체기계 연구개발 발표회 논문집
• /
• pp.110-115
• /
• 2000

The mean streamline analysis using the empirical loss correlations has been developed for performance prediction of industrial mixed-flow fan impellers in the present study. New simple, but effective, models for the additional Euler input work characteristic and an internal recirculation loss due to internal flow reversal under the low flowrate conditions are proposed in this paper. Comparison of overall performance predictions with six sets of test data of mixed-flow fans is accomplished to demonstrate the accuracy of the proposed models. Predicted performance curves by the present set of loss models agree fairly well with experimental data for a variety of mixed-flow fan impellers over the entire operating conditions. The prediction method presented herein can be used efficiently in the conceptual design phase of mixed-flow fan impellers.