• 천문학회보
• /
• 제36권2호
• /
• pp.74.2-74.2
• /
• 2011

We probe the tidal perturbation parameter f of Virgo cluster galaxies. The goal is to measure the strength of tidal fields around individual galaxies to get better understanding gravitational processes that can affect galaxy evolution in the cluster environment. The f-value is defined as a logarithmic ratio between the net internal gravitational force within a galaxy and the external tidal force exerted by a neighboring galaxy. Hence, it provides one way to quantify the tidal field strength of galaxies, in particular, due to galaxy neighbors. In this study, we determine f-values of the VIVA galaxies, samples of the VLA Imaging study of Virgo galaxies in Atomic gas, using the Extended Virgo Cluster Catalog (EVCC) which is the most complete Virgo cluster catalog to date. With diagnostics based on the HI gas and R-band morphologies, we discuss the impact of the tidal fields on the evolution of the VIVA sample. Also, we compare the tidal field strength to the intra cluster medium (ICM) pressure for each sample galaxy to pin down environmental processes at work.

• 혜화의학회지
• /
• 제17권1호
• /
• pp.157-166
• /
• 2008

1. Vertigo and dizziness is also called as Mok-hyun, Hyun-mo, Pung-hyun, Du-pung-hyun-un, Du-sun. 2. Causes and processes of Vertigo and dizziness are mainly divided into external infection and internal damage. Wind, cold, dampness and summer heat are included in the one and in the other, vital energy and blood deficiency, insufficiency of the liver and kidney, retention of phlegm and fluid, emotional disorder and so on. 3. Symptoms of vertigo and dizziness are disequilibrium, nausea, inability of hearing, vomiting, sweating and syncope. 4. Treating of vertigo and dizziness are recovery of vital energy and blood deficiency, strenthening of insufficiency of the liver and kidney, drying of dampness and removing of phlegm.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1994년도 춘계학술대회 논문집
• /
• pp.209-217
• /
• 1994

The present study is concerned with the characteristics of the high speed precision bar cropping. This process is a practical application of High Energy Rate Forming in which the impact energy source is given by internal combustion engine. To enhance the added value of product, the recent forging fields trend toward the near net shape processes through the cold and closed die forging. For the purpose of these processes the precedent process is to obtain the precision billet which has little weight deviation and defect. The accuracy of initial billet by bar cropping depends upon the process parameters and die design technology. Therefore, in order to investigate the effect of process parameters upon product quality, the cropping experiments are carried out according to the various parameters such as billet clearence, billet length, billet material, cropping speed and so on. From these results some criteria of the optimal die design for the product of good quality are suggested.

• International Journal of Contents
• /
• 제14권4호
• /
• pp.30-38
• /
• 2018

Recently, HTTP Adaptive Streaming(HAS), a video streaming service over the HTTP based web platform has become common. The use of HAS service in mobile communication devices such as mobile phones and tablet PCs is rapidly expanding. This paper addresses ways to improve the quality of HAS service by enhancing the terms of viewer satisfaction. HAS systems have several internal operational processes, which can affect viewer satisfaction. Such processes include, the quality determination for the next video chunk, the TCP connections-setup procedure and the congestion control operation of the TCP. This paper proposes a transmission scheme to improve the HAS quality services over mobile web. The proposed scheme takes into consideration the past implicit communication state of the receiver's playback buffer occupancy. The results of these experiments indicate that the proposed scheme can improve the quality of HAS service from the mobile viewer's point of view.

• 제어로봇시스템학회논문지
• /
• 제10권5호
• /
• pp.450-457
• /
• 2004

In this research, the automatic synthesis of knowledge models is proposed. which are the basis of the methods using qualitative models adapted widely in fault diagnosis and hazard evaluation of chemical processes. To provide an easy and fast way to construct accurate causal model of the target process, the Role-Behavior modeling method is developed to represent the knowledge of modularized process units. In this modeling method, Fault-Behavior model and Structure-Role model present the relationship of the internal behaviors and faults in the process units and the relationship between process units respectively. Through the multiple modeling techniques, the knowledge is separated into what is independent of process and dependent on process to provide the extensibility and portability in model building, and possibility in the automatic synthesis. By taking advantage of the Role-Behavior Model, an algorithm is proposed to synthesize the plant-wide causal model, Fault-Causality Graph (FCG) from specific Fault-Behavior models of the each unit process, which are derived from generic Fault-Behavior models and Structure-Role model. To validate the proposed modeling method and algorithm, a system for building FCG model is developed on G2, an expert system development tool. Case study such as CSTR with recycle using the developed system showed that the proposed method and algorithm were remarkably effective in synthesizing the causal knowledge models for diagnosis of chemical processes.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.389-392
• /
• 1999

Fatigue is a process of progressive permanent internal structural change in a material subjected to repeitive stresses. These change may be damaging and result in progressive growth of cracks and complete fracture if the stress repetitins are sufficiently large. For structural members subjected to cyclic loads, the continuous and irrecoverable damage processes are taking place. These processes are referred as the cumulative damage processes due to fatigue loading. Moreover, increased use of high strength concrete makes the fatigue problem more important because the cross-section and dead weight are reduced by using high strength concrete. The purpose of this study is to investigate the shear fatigue behavior of reinforced concrete beams according to shear reinforcement ratio and concrete compressive strength under repeated loadings. For this purpose, comprehensive static and fatigue tests of reinforced concrete beams were conducted. The major test variables for the fatigue teats are the concrete strength and the amount of shear reinforcements. The increase of deflections and steel strains according to load repetition has been plotted and analyzed to explore the damage accumulation phenomena of reinforced concrete beams. An analytical model for shear fatigue behavior has been introduced to analyze the damage accumulation under fatigue loads. The failure mode and fatigue lives have been also studied in the present study. The comparisons between analytical results and experimental data show good correlation.

• Asia pacific journal of information systems
• /
• 제25권2호
• /
• pp.306-328
• /
• 2015

A recent trend in innovation paradigm is the shift from closed innovation to open innovation principles. This trend is characterized by the use of purposive inflows and outflows of knowledge not only to accelerate internal innovation, but also to expand the markets for external use of innovation. However, the Not-Invented-Here (NIH), and Not-Sold-Here (NSH) or Only-Use-Here (OUH) syndromes are the most common challenges encountered in open innovation processes. Therefore, this study has the following main aims: 1) propose a research model that explains the factors that influence NIH and NSH/OUH attitudes based on motivation theory with perceived organizational fairness and commitment, 2) investigate their impacts on NIH and NSH/OUH attitudes, and 3) provide useful theoretical and practical insights. The proposed research model was empirically tested using survey data collected from information technology (IT) professionals in Korea. One of the major findings indicates that IT professionals' perceived organizational fairness has a negative effect on NIH attitudes in open innovation process. Theoretical and practical contributions of this study are also discussed.

• 한국축산식품학회지
• /
• 제40권3호
• /
• pp.323-337
• /
• 2020

This study was conducted to investigate whether adding different levels of raw or differently processed chickpea into different diets of laying quails affected live weight, feed intake, feed efficiency, egg weight and internal and external egg quality. Chickpea was used as raw, autoclaved or microwave-processed, and it was involved in the diets on two different levels (20% and 40%). The sample was divided into 7 groups including the control, 20% and 40% raw, 20% and 40% autoclaved, and 20% and 40% microwave-processed groups. 336 ten-week-old female laying quails were used in the study, and the experiment continued for 19 weeks. In the study, the differences among the groups were insignificant in terms of live weight, feed intake, feed efficiency, egg weight and egg quality characteristics such as shell thickness, shell weight, yolk weight, yolk color and albumin index. The differences were significant in terms of the shape index, Haugh unit (p<0.05) and yolk index (p<0.01). Consequently, it was observed that different thermal processes on chickpeas did not usually have a significant effect on the yield performance of the quails, and the results that were obtained were similar to the other groups. However, it was determined that some egg quality characteristics were affected by the autoclaving and microwaving processes. Between the thermal processes, it may be stated that autoclaving provided better results.

• 산업기술연구
• /
• 제31권A호
• /
• pp.45-51
• /
• 2011

A study has been made on defects which are formed in manufacturing processes of engine bearing and also on fatigue crack growth behavior in each step of bearing metal manufacturing. After the first step (sinter brass powder on steel plate ; Series A) many voids are made on brass surface and its size is decreased at the second step (rolling process of sintered plate ; Series B). After the third step (re-sintering step of brass powder and rolling ; Series C) the number of voids is decreased and its type shows line. The time of fatigue crack initiation and the growth rate of fatigue crack are in order of Series A, Series B, Series C. These reasons are that void fosters the crack initiation and growth, and residual stress made by rolling process affects on the crack growth rate in Series B, C. In forming and machining processes by use of final bearing metal, crack was observed at internal corner of flange and peeling off was observed at interface between steel and brass. Owing to the above crack and peeling off, it is considered that there is a possibility of fatigue fracture during the application time.

• 대한안전경영과학회지
• /
• 제9권4호
• /
• pp.99-112
• /
• 2007

In most recent years, the business competition has spreads over all fields of corporations and their management area regardless of time and place, which makes the survival environment of each enterprise fiercer. In order to secure a high position in the competitive market, the various firms has implemented many methods related to price, quality, and service efficiency. However, the implementation with only low price or high quality might be helpless to hold a high position in modem market. Moreover more attention should be paid to the internal business processes of an organization. Therefore, a new and different method should be searched or developed in order to win the competitive power among other enterprises. This research will focus on the improvement of the business processes within the non-manufacturing industry by applying Lean Six Sigma methodology. DMAIC method will be applied to improve the inbound and outbound logistics processes, manage the inbound and outbound vehicles, and control the receiving and shipping activities.