• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제38권
• /
• pp.42.1-42.7
• /
• 2016

Background: The purpose of this retrospective study was to evaluate the clinical utility of an implant with a sandblasted, large-grit, acid-etched (SLA) surface and internal connection. Methods: Six patients who received dental implants in the Department of Oral and Maxillofacial Surgery, Chonnam National University Dental Hospital, were analyzed by factors influencing the success rate and marginal bone loss. Factors included patient's age, sex, implant installation site, whether bone graft was done, type of bone graft materials, approaching method if sinus lift was done, and the size of the fixture. In addition, the marginal bone loss was analyzed by using a radiograph. Results: All implants were successful, and the cumulative survival rate was 100 %. Average marginal bone loss of 6 months after the installation was 0.52 mm and 20 months after the functional loading was 1.06 mm. Total marginal bone resorption was 1.58 mm on average. There was no statistically significant difference in mesial and distal marginal bone loss. Conclusions: The short-term clinical success rate of the implant with an SLA surface and internal connection was satisfactory. Moreover, the marginal bone loss was also consistent with the implant success criteria.

• Journal of Gastric Cancer
• /
• 제4권2호
• /
• pp.109-120
• /
• 2004

Purpose: Individual gastric cancers demonstrate complicated genetic alterations. The PCR-based analysis of polymorphic microsatellite sequences on cancer-related chromosomes has been used to detect chromosomal loss and microsatellite instability. For the purpose of preoperative usage, we analyzed the correspondance rate of the microsatellite genotype between endoscopic biopsy and surgical specimens. Materials and Methods: Seventy-three pairs of biopsy and surgical specimens were examined for loss of heterozygosity and microsatellite instability by using 40 microsatellite markers on eight chromosomes. Microsatellite alterations in tumor DNAs were classified into a high-risk group (baselinelevel loss of heterozygosity: 1 chromosomal loss in diffuse type and high-level loss of heterozygosity: 4 or more chromosomal losses) and a low-risk group (microsatellite instability and low-level loss of heterozygosity: 2 or 3 chromosomal losses in diffuse type or $1\∼3$ chromosomal losses in intestinal type) based on the extent of chromosomal loss and microsatellite instability. Results: The chromosomal losses of the biopsy and the surgical specimens were found to be different in 21 of the 73 cases, 19 cases of which were categorized into a genotype group of similar extent. In 100 surgical specimens, the high-risk genotype group showed a high incidence of nodal involvement (19 of 23 cases: $\leq$5 cm; 23 of 24 cases: >5 cm) irrespective of tumor size while the incidence of nodal involvement for the low-risk genotype group depended on tumor size (5 of 26 cases: $\leq$5 cm; 18 of 27 cases: >5 cm). Extraserosal invasion was more frequent in large-sized tumor in both the high-risk genotype group ($\leq$5 cm: 12 of 23 cases; >5 cm: 23 of 24 cases) and the low-risk genotype group ($\leq$5 cm: 7 of 26 cases; >5 cm: 16 of 27 cases). The preoperative prediction of tumor invasion and nodal involvement based on tumor size and genotype corresponded closely to the pathologic tumor stage (ROC area >0.7). Conclusion: An endoscopic biopsy specimen of gastric cancer can be used to make a preoperative genetic diagnosis that accurately reflect the genotype of the corresponding surgical specimen.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.326-332
• /
• 2000

It should be essentially considered as important points that design of case in electronic product which simultaneously satisfied with structural stability and molding form in respect to developmental period and economical aspect. Especially, a shape of air vents grille, which is made to emit heat happen to be in the internal of product, must satisfy durability and strength but We have no quantitative data because to be done by experience of designer. So, in this study, We will propose that structure of optimal and method of design in air vents grille, which to reduce a lot of loss of time and cost due to trial and error of design and to stabilize in the BALLISTIC Impact test as to estimate strength with external appearance of product, using linear analysis.

• Journal of Advanced Research in Ocean Engineering
• /
• 제3권1호
• /
• pp.1-14
• /
• 2017

The safety analysis of an earthquake is carried out during the operation of a subsea pipeline and an onshore pipeline. Several cases are proposed for consideration. In the case of a buried pipeline, permanent ground deformation by the earthquake and an increase of internal pressure by the acceleration of the earthquake should be considered. In the case of a subsea pipeline, a bending moment is caused by liquefaction of the backfill material on a trenched seabed, etc., which results in a high bending moment of the buried pipeline. The bending moment causes the collapse of the subsea pipeline or a leak of crude oil or gas, which results in economic loss due to enormous environmental contamination and social economic loss owing to operation functional failure. Thus, in order to prevent economic loss and operation loss, structurally sensitive design with regard to seismic characteristics must be performed in the buried pipeline in advance, and the negative impact on the buried pipeline must be minimized by conducting a thorough analysis on the seabed and backfilling material selection. Moreover, it is proposed to consider the selection of material properties for the buried pipeline. A more economical review is also required for detailed study.

• 대한두경부종양학회지
• /
• 제14권1호
• /
• pp.20-26
• /
• 1998

Objectives: Deletion in the short arm of chromosome 3 is common in many human cancers, including sporadic and hereditary renal carcinomas, small cell lung carcinomas, non-small cell lung carcinomas, and carcinomas of the ovary, breast, and cervix. A high frequency of chromosomal aberrations in head and neck cancers involving chromosome 3p has also been reported. These findings suggest that multiple tumor suppressor genes may be present on the short arm of chromosome 3. Materials and Methods: To investigate the possibility of chromosome 3p deletions in the Korean head and neck cancer patients, we applied a polymerase chain reaction(PCR)-based Restriction Fragment Length Polymorphism analysis to the DNA samples of matched normal mucosa and head and neck squamous cell carcinomas from 19 patients. Results: In the 19 normal samples heterozygosity at the polymorphic loci varied: 6 at the D3F15S2 locus(on telomeric 3p21), 2 at the D3S32 locus(on centromeric 3p21), and 4 at the THRB locus(on centromeric 3p24). In 12 matched carcinoma specimens, LOH(loss of heterozygosity) was observed at D3F15S2 in 1 of 6(17%), D3S32 in 1 of 2(50%), and at THRB in 2 of 4 cases(50%). Conclusion: The frequency of chromosome 3p deletion in the Korean head and neck carcinomas appear as other country did.

• Journal of Magnetics
• /
• 제20권2호
• /
• pp.148-154
• /
• 2015

48-V ISG (Integrated Starter Generator) system has attracted attention to improve the fuel efficiency of ICE (Internal Combustion Engine) vehicle. One of the key components that significantly affects the cost and performance of the 48-V ISG system is the motor. In an ISG motor, the core and copper loss make the motor efficiency change because the motor has a broad driving operated range and more diverse driving modes compared with other motors. When designing an ISG motor, the selection of an electrical steel sheet is important, because the electrical steel sheet directly influences the efficiency of the motor. In this paper, the efficiency of the ISG motor, considering core loss and copper loss, is analyzed by testing different types of electrical steel sheets with respect to the driving speed range and mode. Using the results of a finite element method (FEM) analysis, a method to select the electrical steel sheet is proposed. This method considers the cost of the steel sheet and the efficiency according to driving mode frequency during the design process of the motor. A wound rotor synchronous machine (WRSM) was applied to the ISG motor in this study.

• Tuberculosis and Respiratory Diseases
• /
• 제38권1호
• /
• pp.70-73
• /
• 1991

We have experienced a case of lung injury caused by accidental inhalation of ammonia gas in a 34 year-old-man. By the explosion of ammonia tank in a refrigerator boat he inhaled ammonia gas. Several minutes later, he suffered from severe dyspnea and visual loss. On arrival at emergency room, analysis of arterial blood gas revealed severe hypoxemia and his chest film showed bilateral pulmonary infiltrates. Under the impression of adult respiratory distress syndrome, mechanical ventilator was applied to the patient. After recovery from ARDS and tracheal edema, he complained of some hemoptysis and productive sputum during the admission. So we checked bronchoscopy and bronchograpy which showed tracheal bullae just above carina and tubular bronchiectatic change in the right lower lobe. We report a case of lung injuries-ARDS, tracheal bullae, and bronchiectasis-caused by inhalation of ammonia gas with the review of the relevant literatures.

• Tuberculosis and Respiratory Diseases
• /
• 제73권1호
• /
• pp.11-21
• /
• 2012

Background: While qualitative analysis of methylation has been reviewed, the quantitative analysis of methylation has rarely been studied. We evaluated the methylation status of CDKN2A, $RAR{\beta}$, and RASSF1A promoter regions in non-small cell lung carcinomas (NSCLCs) by using pyrosequencing. Then, we evaluated the association between methylation at the promoter regions of these tumor suppressor genes and the clinicopathological parameters of the NSCLCs. Methods: We collected tumor tissues from a total of 53 patients with NSCLCs and analyzed the methylation level of the CDKN2A, $RAR{\beta}$, and RASSF1A promoter regions by using pyrosequencing. In addition, we investigated the correlation between the hypermethylation of CDKN2A and the loss of $p16^{INK4A}$ immunoexpression. Results: Hypermethylation of CDKN2A, $RAR{\beta}$, and RASSF1A promoter regions were 16 (30.2%), 22 (41.5%), and 21 tumors (39.6%), respectively. The incidence of hypermethylation at the CDKN2A promoter in the tumors was higher in undifferentiated large cell carcinomas than in other subtypes (p=0.002). Hyperrmethylation of CDKN2A was significantly associated with $p16^{INK4A}$ immunoexpression loss (p=0.045). With regard to the clinicopathological characteristics of NSCLC, certain histopathological subtypes were found to be strongly associated with the loss of $p16^{INK4A}$ immunoexpression (p=0.016). Squamous cell carcinoma and undifferentiated large cell carcinoma showed $p16^{INK4A}$ immunoexpression loss more frequently. The Kaplan-Meier survival curves analysis showed that methylation level and patient survival were barely related to one another. Conclusion: We quantitatively analyzed the promoter methylation status by using pyrosequencing. We showed a significant correlation between CDKN2A hypermethylation and $p16^{INK4A}$ immunoexpression loss.

• 대한기계학회논문집
• /
• 제19권11호
• /
• pp.2995-3002
• /
• 1995

The cooling problem of the hot internal pipe flow has been investigated. Simultaneous conduction, convection, and radiation were considered with azimuthally varying convective heat loss at the pipe wall. A complex, nonlinear integro-differential radiative transfer equation was solved by the discrete ordinates method (or called S$_{N}$ method). The energy equation was solved by control volume based finite difference technique. A parametric study was performed by varying the conduction-to-radiation parameter, optical thickness, and scattering albedo. The results have shown that initially the radiatively active medium could be more efficiently cooled down compared with the cases otherwise. But even for the case with dominant radiation, as the medium temperature was lowered, the contribution of conduction became to exceed that of radiation.n.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
• /
• pp.311-318
• /
• 1998

In this paper, the power flow analysis(PFA) method is applied to the prediction of the vibrational energy density and intensity of coupled co-planar plates. To cover the energy transmission and reflection at the joint of the plates, the wave transmission approach is introduced with the assumption that all the incident waves are normal to the joint. By changing the frequency ranges and internal loss factors, we have obtained the PFA results, and compared them with the analytical exact solutions.