• Journal of Forest and Environmental Science
• /
• 제29권1호
• /
• pp.99-108
• /
• 2013

This study was conducted to evaluate the non-timber forest functions of the Research Forest area of Kangwon National University. In this study, forest recreation function was investigated through survey method answered by forest management experts. The evaluation factors for forest recreation function were separated into external and internal factors. Each factor was classified into intermediate element and detailed element. Therefore in this study, the evaluation factors of forest recreation function were divided into two groups which are the potential of external factors and the suitability of internal factors. Potential of the external factors were divided into accessibility, location, landscape and induction factors while the suitability of internal factor was divided into stand structure, forest structure and human impact. The priority of the potential of external factors was in order that location, accessibility, induction factors and landscape. The most important factors for the location, accessibility, induction and landscape factors are based on regional characteristics.

• Coupled systems mechanics
• /
• 제5권2호
• /
• pp.157-190
• /
• 2016

This paper deals with frequency analysis of Euler-Bernoulli beams carrying an arbitrary number of Kelvin-Voigt viscoelastic dampers, subjected to harmonic loads. Multiple external/internal dampers occurring at the same position along the beam axis, modeling external damping devices and internal damping due to damage or imperfect connections, are considered. The challenge is to handle simultaneous discontinuities of the response, in particular bending-moment/rotation discontinuities at the location of external/internal rotational dampers, shear-force/deflection discontinuities at the location of external/internal translational dampers. Following a generalized function approach, the paper will show that exact closed-form expressions of the frequency response under point/polynomial loads can readily be derived, for any number of dampers. Also, the exact dynamic stiffness matrix and load vector of the beam will be built in a closed analytical form, to be used in a standard assemblage procedure for exact frequency response analysis of frames.

• 대한수학회논문집
• /
• 제16권3호
• /
• pp.459-485
• /
• 2001

The aim of EIT (electrical impedance tomography) system is to image cross-section conductivity distribution of a human body by means of both generating and sensing electrodes attached on to the surface of the body, where currents are injected and voltages are measured. EIT has been suffered from the severe ill-posedness which is caused by the inherent low sensitivity of boundary measurements to any changes of internal tissue conductivity values. With a limited set of current-to-voltage data, figuring out full structure of the conductivity distribution could be extremely difficult at present time, so it could be worthwhile to extract some necessary partial information of the internal conductivity. We try to extract some key patterns of current-to-voltage data that furnish some core information on the conductivity distribution such s location and size. This overview provides our recent observation on the location search and the size estimation.

• Journal of Mechanical Science and Technology
• /
• 제14권9호
• /
• pp.935-946
• /
• 2000

Elastic-plastic stress analysis has been performed to evaluate the fatigue life of an autofrettaged pressure vessel containing cross-bores subjected to pulsating internal pressure of 200 MPa. Finite element analyses were used to calculate the residual and operating stress distributions of the pressure vessel due to the autofrettage process and pulsating internal pressure, respectively. Theoretical stress concentration factors of 3.06, 2.58, and 2.64 were obtained at the cross-bore of the pressure vessel due to internal pressure, 50%, and 100% autofrettage loadings, respectively. Local stresses and local strains determined from the elastic-plastic finite element analysis were employed to calculate the failure location and fatigue life of the pressure vessel with radial cross-bores, incorporating the low-cycle fatigue properties of the pressure vessel steel and fatigue damage parameters. Increase in the amount of overstrain by autofrettage process moved the crack initiation location from the inner radius toward a mid-wall, and extended the crack initiation life. Predicted fatigue life of the fully autofrettaged pressure vessel with cross-bores increased about 50%, compared to the unautofrettaged pressure vessel. At the autofrettage level higher than 50%, the failure location and fatigue life of the pressure vessel were not significantly influenced by the autofrettage level.

• 한국항공우주학회지
• /
• 제37권8호
• /
• pp.780-788
• /
• 2009

복합재 날개 구조물에 대한 구조 건전성 및 손상을 평가하기 위하여 정적 구조강도시험에 음향방출(AE)법이 응용되었다. 시험중 스트레인과 변위측정기법을 통하여 정적구조강도를 확인하였고, 음향방출요소 분석과 위치표정기법을 통하여 구조물의 내부 손상을 평가하고 손상위치를 찾을 수 있었다. 시험은 설계제한하중시험, 2차에 걸친 설계극한 하중시험, 파단시험이 수행되었다. 주요한 AE신호는 front lug근처의 표면에 부착된 센서에 의하여 감지되었다. 특히 1차 설계극한하중시험에서 스트레인 및 변위결과는 내부 손상을 보이지 않았으나 AE신호는 내부 손상이 이미 형성된 현상을 나타내었다. 파단시험에서는 AE활성도가 매우 활발하였고, 스트레인 및 변위의 결과는 심한 손상에 의하여 하중경로가 바뀌는 경향을 나타내었다. 음향방출법을 적용하여 정적 구조시험이 진행되는 동안 내부손상이 발생되는 하중과 위치를 정확하게 평가할 수 있었다. 본 연구로부터 음향방출법은 정적 구조강도시험에 있어 내부 손상을 평가하는데 유용한 기법임이 확인되었다.

• Structural Engineering and Mechanics
• /
• 제51권5호
• /
• pp.773-792
• /
• 2014

In this paper, we study the inverse mode shape problem for an Euler-Bernoulli beam, using an analytical approach. The mass and stiffness variations are determined for a beam, having various boundary conditions, which has a prescribed polynomial second mode shape with an internal node. It is found that physically feasible rectangular cross-section beams which satisfy the inverse problem exist for a variety of boundary conditions. The effect of the location of the internal node on the mass and stiffness variations and on the deflection of the beam is studied. The derived functions are used to verify the p-version finite element code, for the cantilever boundary condition. The paper also presents the bounds on the location of the internal node, for a valid mass and stiffness variation, for any given boundary condition. The derived property variations, corresponding to a given mode shape and boundary condition, also provides a simple closed-form solution for a class of non-uniform Euler-Bernoulli beams. These closed-form solutions can also be used to check optimization algorithms proposed for modal tailoring.

• Tuberculosis and Respiratory Diseases
• /
• 제70권2호
• /
• pp.125-131
• /
• 2011

Background: The clinical manifestation of $M.$ $tuberculosis$ infection ranges from asymptomatic latent infection, to focal forms with minimal symptoms and low bacterial burdens, and finally to advanced tuberculosis (TB) with severe symptoms and high bacillary loads. We investigated the diagnostic sensitivity of the whole-blood interferon-${\gamma}$ release assay according to the wide spectrum of clinical phenotypes. Methods: In patients diagnosed with active TB that underwent $QuantiFERON^{(R)}$ (QFT) testing, the QFT results were compared with patients known to be infected with pulmonary tuberculosis (P-TB) and extra-pulmonary TB (EP-TB). In addition, the results of the QFT test were further analyzed according to the radiographic extent of disease in patients with P-TB and the location of disease in patients with EP-TB. Results: There were no statistical differences in the overall distribution of QFT results between 177 patients with P-TB and 84 patients with EP-TB; the positive results of QFT test in patients with P-TB and EP-TB were 70.1% and 64.3%, respectively. Among patients with P-TB, patients with mild extents of disease showed higher frequency of positive results of QFT test than that of patients with severe form (75.2% vs. 57.1%, respectively; p=0.043) mainly due to an increase of indeterminate results in severe P-TB. Patients with TB pleurisy showed lower sensitivity by the QFT test than those with tuberculous lymphadenitis (48.8% vs. 78.8%, respectively; p=0.019). Conclusion: Although QFT test showed similar results between overall patients with P-TB and EP-TB, individual sensitivity was different according to the radiographic extent of disease in P-TB and the location of disease in EP-TB.

• Archives of Plastic Surgery
• /
• 제40권6호
• /
• pp.761-765
• /
• 2013

Background Partially resecting ribs of the recipient site to facilitate easy anastomosis of the internal mammary vessels to free flaps during breast reconstruction can cause chest wall pain or deformities. To avoid this, the intercostal perforating branches of the internal mammary vessels can be used for anastomosis. The purpose of this study was to investigate the location and size of the internal mammary perforator vessels based on clinical intraoperative findings and to determine their reliability as recipient vessels for breast reconstruction with microsurgical free tissue transfer. Methods Twelve patients were preoperatively screened for the presence of internal mammary perforators using Doppler tracing. After modified radical mastectomy was performed by a general surgeon, the location and size of the internal mammary perforator vessels were microscopically investigated. The external diameter was examined using a vessel-measuring gauge from a mechanical coupling device, and the distance from the mid-sternal line to the perforator was also measured. Results The largest arterial perforator averaged 1.5 mm, and the largest venous perforator averaged 2.2 mm. Perforators emerging from the second intercostal space had the largest average external diameter; the second intercostal space also had the largest number of perforators arising from it. The average distance from the mid-sternal line to the perforator was 20.2 mm. Conclusions Internal mammary perforators presented consistent and reliable anatomy in this study. Based on these results, the internal mammary perforators appear to have a suitable diameter for microvascular anastomosis and should be considered as an alternative recipient vessel to the internal mammary vessel.

• 가정과삶의질연구
• /
• 제11권1호
• /
• pp.67-79
• /
• 1993

The purpose of this study were to study the relationships of the locus of control and the frustration reaction of adolescents according to their family-environment. The objects are 369 students in the second grade of middle schools located in Kwangju and Chonnam. The instruments used in this study are "Internal-External locus of control scale for students" (the Nowicki and Strickland's scale translated by Jung Eun-Joo and Son Jin-Hoon) " Picture-Frustration Test" (by Kim Jae Eun and Kim Tai Ryun) The data is produced on frequency distribution percentile average standard deviation F-test Pearson's correlation with SAS computer program. The results are as follows: 1) The internal -external locus of control shows significant differences in the location sex. the number of siblings family pattern father's educational level and mother's occupation. 2) The reaction type for frustration shows statistically significant differences in accordance with their sex the number of siblings birthorder fathers grown-up place parents' age and parents' occupation. 3) The direction of aggression for frustration shows significant difference in according with the location sex the number of siblings birth order family pattern parents' grown-up place and father's educational level. 4) According to the internal-external locus of control the frustration reaction scores are different significantly. Internal adolescents have positive relation with Need-Persistance and Impunitiveness and negative relation with Obstade-Dominance and Extrapunitiveness.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 1994년도 학술발표대회논문집 하
• /
• pp.57-62
• /
• 1994

The purpose of this study is to improve the neiboring environment in the internal and external university campuses. For this purpose, survey to 567 students in 7 universities in Daegu-Kyungbuk area. According to the changes of location pattern of campuses, the external facilities are play a role to help the function of internal facilities, and to accommodate the daily life of students. Therefore this study plan to find out their satisfaction and need of the neiboring facilities.