• 한국항공운항학회지
• /
• 제16권4호
• /
• pp.41-48
• /
• 2008

Functional analysis of air transport mission is conducted to establish the performance requirements of the commercial transport designs. The analysis process begins by making a top-down analysis to the aircraft system level mission functions. Correctly interpreting the top-level performance requirements is the first step in designing and building an aircraft system. Each function and sub-function is allocated and examined to the aircraft level and flight operations phase to optimize the system performance and design requirements, such that these lower-level requirements can be traced back to the top-level requirements they are designed to fulfill. Special attention is given to making sure all interfaces, both internal and external, are addressed. The results are also in good resources of functional hazard assessment involved in certification processes.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 추계학술대회 논문집
• /
• pp.361-364
• /
• 1995

The static charges are generated by streaming electrification phenomena when insulating oil flowing by force for the purpose of cooling at the internal of Ultra-high power transformer. In this thesis, their elimination method was studied. The falter represents a greet much electrification characteristics because falter has large interfaces with liquid. In this paper, the streaming-electrification phenomena of insulating oil by metal filter were measured by mesh number, oil flow rate, oil temperature and a kind of mesh and The effect of charge elimination by metal filter generated minus ion was measured.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1836-1839
• /
• 2005

We have developed Ethernet based real-time communication systems called "Vnet/IP" for DCS which is the control system for process automation. This paper describes the features and the technologies of the ASIC which is utilized in the communication interface hardware for Vnet/IP. Vnet/IP has been developed for mission-critical communications. Hence it has real-time feature, high reliability and precise time synchronization capability. At the same time, it is able to deal with standard protocols without influence on mission-critical communications. The communication interface hardware has a host interface and dual redundant network interfaces. The host interface can be chosen PCI-bus or R-bus which is the proprietary internal bus developed for the high reliable redundant controller. Each network interface is a RJ45 connection with 1Gbps maximum in compliance with IEEE802.3.

• Structural Monitoring and Maintenance
• /
• 제1권2호
• /
• pp.197-211
• /
• 2014

An investigation of tunnel linings is performed at two tunnels in the US using complimentary noncontact techniques: air-coupled ground penetrating radar (GPR), and a vehicle-mounted scanning system (SPACETEC) that combines laser, visual, and infrared thermography scanning methods. This paper shows that a combination of such techniques can maximize inspection coverage in a comprehensive and efficient manner. Since ground-truth is typically not available in public tunnel field evaluations, the noncontact techniques used are compared with two reliable in-depth contact nondestructive testing methods: ground-coupled GPR and ultrasonic tomography. The noncontact techniques are used to identify and locate the reinforcement mesh, structural steel ribs, internal layer interfaces, shallow delamination, and tile debonding. It is shown that this combination of methods can be used synergistically to provide tunnel owners with a comprehensive and efficient approach for monitoring tunnel lining conditions.

• 전자공학회논문지A
• /
• 제31A권2호
• /
• pp.116-124
• /
• 1994

This paper describes the design of a high-level synthesis system. ISyn: Interface Synthesis System for ISPS-A. which generates hardware satisfying timing constraints. The original version of ISPS is extended to be used for the description/capture of interface operations and timing constraints in the ISPS-A. To generate the schedule satisfying interface constraints the scheduling process is divided into two steps:pre-scheduling and post-scheduling. ISyn allocates hardware modules with I/O ports by the clique partitioning algorithm. Experimental results show that ISyn is capable of synthesizing hardware modules effectively for internal and/or interactive operations.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1747-1749
• /
• 1996

A method for calculating the electromagnetic scattering from arid internal field distribution of arbitrally, shaped, inhomogeneous dielectric bodies is presented. Tetrahedral volume elements are used to model a scattering body in which the electrical parameters are defined constant in each tetrahedron. Special basis functions are defined within the tetrahedral volume elements to satisfy the boundary condition at interfaces between different dielectric media. In order to test the accuracy of the solution by using the present method, it is applied to obtain the scattered field by the dielectric sphere. The accuracy of the fields calculated by using the tetrahedral cell method is found to be comparable to that of others.

• Journal of Information Processing Systems
• /
• 제5권1호
• /
• pp.1-4
• /
• 2009

Level set methods are the numerical techniques for tracking interfaces and shapes. They have been successfully used in image segmentation. A new variational level set evolving algorithm without re-initialization is presented in this paper. It consists of an internal energy term that penalizes deviations of the level set function from a signed distance function, and an external energy term that drives the motion of the zero level set toward the desired image feature. This algorithm can be easily implemented using a simple finite difference scheme. Meanwhile, not only can the initial contour can be shown anywhere in the image, but the interior contours can also be automatically detected.

• 열처리공학회지
• /
• 제30권5호
• /
• pp.207-214
• /
• 2017

In this study, failure behavior of piercing plug for seamless tube manufacturing process was studied. Three different kinds of passed piercing plugs (10, 90, 215 times) were prepared. The shape deformation of the passed piercing plugs was observed by 3D coordinate measuring machine, and the oxidized layer on the surface of piercing plug was observed by optical microscopy. The length reduction of piercing plug presented at 215 times passed plug. It was found that the oxidized layer consisted of outer scale, inner scale and internal oxidation layers, and the inner scale layer had vertical cracks, and interfaces had horizontal cracks. We proposed the failure mechanism of piercing plug during seamless tube manufacturing process based on the formation of vertical and horizontal crack.

• 산업공학
• /
• 제10권3호
• /
• pp.189-196
• /
• 1997

This paper presents a cell formation approach for a cellular manufacturing system to minimize the inter-cell moves considering operation sequences. Two new factors are introduced: (1)flow-similarity(FS) for integrating direct/indirect inter-machine flow and similarity (2)machine cell-part moves (CPM) for exactly computing inter-cell moves. FS is used for combining machines and CPM is used for assigning the parts to the preliminary machine cells. In addition, we develop an aggregated heuristic algorithm to form manufacturing machine cells and assign the parts to those cells based on these concepts. We use performance criterion called total inter-cell moves(TICM), which is the total material flow between internal cells and external cells. Results of computational tests on a number of randomly generated test problems show that the suggested heuristic is superior to existing methods.

• 산업공학
• /
• 제10권3호
• /
• pp.167-177
• /
• 1997

This paper deals with an application of process value analysis method for a manufacturing process in order to redesign facility layout in a paper company. We have used the value analysis method which permits an overall and rigorous study of process by a functional approach. Firstly, customer's expectations for the future process are clearly and precisely expressed with specifications of the Functional Extern Analysis. The existing process is analyzed using various tool of the Functional Internal Analysis in the second part. From the results of these analysis, we find out that the main problems of current facility are due to scheduling and facility layout. This paper is devoted to resolve the second problem. We suggest an ideal solution in order to have a reference solution. Nextly, We give realistic choices and the final solution for the facility layout.