• Journal of Oral Medicine and Pain
• /
• 제14권1호
• /
• pp.113-121
• /
• 1989

In this study, 94 patients with temporomandibular disorders were interviewed to evaluate the effect of the treatment they received at the department of Oral diagnosis and oral Medicine in Seoul national university Hospital. The treatment administered to the patient were patient education, relaxation procedures, physical therapy, occlusal splint therapy and selective grinding of teeth. The following results were disclosed : 1. 97.9% of the patients reported no pain or considerably less pain than they had reported at their first visits to the department. 2. 89.3% of the patients thought that the treatment provided was either complete or considerably successful. 3. TMJ and facial pain was resolved within average 3.0 months 4. Of the 70 patients who previously reported having jaw joint sound, 34 patients (48.6%) no longer reported int. 5. Of the 48 patients who previously reported having headache regularly, 3 patients (68.8%) no longer reported headache regularly. 6. Of the 66 patients who previously reported having masticatory muscle pain, 41 patients (62.1%) no longer reported masticatory muscle pain. 7. Analysis of the data did not disclose a subgroup or factor, such as age, the stage of internal derangement, capsulitis, bruxism, MPD, duration of symptoms, that could be correlated with the reduction of pain or the patient's perception of success of treatment.

• 한국정밀공학회지
• /
• 제19권12호
• /
• pp.57-63
• /
• 2002

In this paper, the feedforward control with least mean square (LMS) adaptive algorithm is proposed and examined to reduce rotating error by runout of an active magnetic bearing system. Using eddy-current type gap sensor fur control, the electrical runout caused by non-uniform material properties of sensor target produces rotational error amplified in feedback control loop, so this runout should be eliminated to increase rotating accuracy. The adaptive feedforward controller is designed and examined its tracking and stability performances numerically with established frequency response function. The tested grinding spindle system is manufactured with a 5.5 ㎾ internal motor and 5-axis active magnetic bearing system including 5 eddy current gap sensors which have approximately 15 ~ 30 ${\mu}{\textrm}{m}$ of electrical runout. According to the experimental analysis, the error signal in radial bearings is reduced to less than 5 ${\mu}{\textrm}{m}$ when it is rotating up to 50,000 rpm due to applying the feedforward control for first order harmonic frequency, and vibration of the spindle base is also reduced about same frequency.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.947-952
• /
• 1997

The magnetic polishing is the useful method to finish using magnetic power of a magnet. The time hasn't been that long since the magnetic polishing method was introduced to korea as one of precision polishing techniques. However, the reasons for not being spreaded widely are the magnetic polishing method don't have mediocrity for machine, the efficiency of magnet-abrasive is confined as a bad polishing, and there are not many researchers in this field. The mechanism of this R&D is dealing with the dynamic state of magnet-abrasive. This paper deals with mediocritizing magnetic polishing device into regular lathe and this experiment was conducted in order to get a best surface roughness with low cost. Beside the subsidiary experiment was performed using the mixed magnet-abrasive with general alumina, barium. This paper introduced the main reason for difficulty using this method in industrial field. It needs more continues research on it. This paper contains the result of experiment to acquire the best surface roughness, not using the high-cost polishing material in processing. The average diameters of magnet-abrasive are the particles of 150 $\mu\textrm{m}$, 250 $\mu\textrm{m}$.

• International Journal of Precision Engineering and Manufacturing
• /
• 제6권2호
• /
• pp.19-25
• /
• 2005

In this paper, the feedforward control with least mean square (LMS) adaptive algorithm is proposed and examined to reduce rotating error by runout of an active magnetic bearing system. Using eddy-current type gap sensors for control, the electrical runout caused by non-uniform material properties of sensor target produces rotational error amplified in feedback control loop, so this runout should be eliminated to increase rotating accuracy. The adaptive feedforward controller is designed and examined its tracking performances and stability numerically with established frequency response function. The designed feedforward controller was applied to a grinding spindle system which is manufactured with a 5.5 kW internal motor and 5-axis active magnetic bearing system including 5 eddy current gap sensors which have approximately 15∼30㎛ of electrical runout. According to the experimental results, the error signal in radial bearings is reduced to less than 5 ,Urn when it is rotating up to 50,000 rpm due to applying the feedforward control for first order harmonic frequency, and corresponding vibration of the spindle is also removed.

• 대한기계학회논문집B
• /
• 제25권10호
• /
• pp.1427-1435
• /
• 2001

Air movement in wokplaces, whether resulting from a forced ventilation system or naturally occurring airflow, has a significant impact on occupational health. In a huge shipbuilding factory building, typical harmful factors such as fume or vaporized gas from welding and cutting of steel plates, and dusts from grinding give unpleasant feeling. From field data survey, the yearly dominant, wind directions for the shipbuilding factory building tested were northwest, northeast and southeast Among the three wind directions, the ventilation improvement was the worst for the northeastern wind. This study was focused on location of the opening vents in order to utilize the natural ventilation effectively. Instantaneous velocity fields inside the 1/1000 scale-down factory building model were measured using a 2-frame PIV system. The factory building model was embedded in an atmospheric boundary layer simulated in a wind tunnel. The modified vents improve the internal Ventilation flow with increasing the flow speed more than two times, compared with that of present vents.

• 마이크로전자및패키징학회지
• /
• 제27권3호
• /
• pp.89-93
• /
• 2020

반도체 패키지의 경박단소화로 인해 발생하는 복잡한 휨 거동은 내부 응력을 발생시켜 박리나 균열과 같은 다양한 기계적인 결함을 야기한다. 이에 따른 수율 감소를 막기 위해 휨 거동을 정확하게 예측하려는 노력은 다양한 측면에서 그 접근이 이루어지고 있다. 이 중 패키지를 구성하는 주 재료인 실리콘 웨이퍼는 일반적으로 균질한 물질로 취급되어 열에 의한 휨 거동은 전혀 없는 것으로 묘사된다. 그러나 실리콘을 얇게 가공하기 위해서 진행되는 그라인딩과 폴리싱에 의해 상온에서 휨이 발생한다는 사실이 보고되어 있고, 이는 표면에 형성되는 damage layer가 두께 방향으로 불균질함을 발생시키는 것으로부터 기인한다. 이에 본 논문에서는 반도체 패키징 공정 중 최고온 공정 과정인 solder reflow 온도에서 단면 연마된 웨이퍼가 나타내는 휨 거동을 측정하고, 이러한 휨 량이 나타나는 원인을 연마된 면과 그렇지 않은 면의 열팽창계수를 측정함으로써 밝혀내었다. 측정에는 미세 변형률과 형상이 모두 측정 가능한 3차원 디지털 이미지 상관법(Digital Image Correlation; DIC)을 이용하였다.

• 한국건설순환자원학회논문집
• /
• 제5권3호
• /
• pp.78-83
• /
• 2010

본 연구에서는 SBFC의 기본 성능을 분석하고, 페이스트 및 모르터에서의 공학적 특성을 검토하여, 향후 경제적인 조강콘크리트 개발을 위한 방안으로 활용하고자 하였다. 실험결과 SBFC의 우수한 조기강도 발현 성능을 확인 할 수 있었고, 유동성을 고려했을 때 OPC와 SBFC와의 적정 혼입율을 도출하여 사용하는 것이 바람직 할 것으로 판단된다.

• Design & Manufacturing
• /
• 제12권1호
• /
• pp.41-46
• /
• 2018

This study proves the causes of cylinder and piston jam by scratches which is the fatal problem of hydraulic breaker through the thermal analysis and thermal-structural coupled field analysis. The trouble from the scratch is a complex problem which can be caused by manufacturing process (this is an internal factor) and the users mistake or contamination in the hydraulic circuit (these are an external factor). Hence, it's not easy to investigate the causes, also hard to prevent the recurrence. In this reason, hydraulic breaker manufacturers are trying to improve the manufacturing process such as machining, heat treatment, grinding, cleaning, also to prevent the contamination in hydraulic circuit and to remove the remains. It's being managed thoroughly by manufacturers. This study shows the effect of the temperature rise by the frictional heat generated when the piston hits the tool on the hydraulic oil while the hydraulic breaker is operating, also the temperature distribution when it starts to affect main components of hydraulic breaker. The stress and the amount of deformation also could be found through thermal-structural coupled field analysis. It proved that the stress and deformation are proportionally increased according to the temperature rise in hit area, and it affects the cylinder and the viscosity of hydraulic oil inside the cylinder when it heats up beyond the certain temperature.

• 대한한방내과학회지
• /
• 제16권2호
• /
• pp.146-177
• /
• 1995

The purpose of this study was to investigate the relationship between the teeth and Zhang-Fu(臟腑), dental diseases, and the hygiene of the mouth through the literature of oriental medicine. First, the relatonship between the teeth and Zhang-Fu is reviewed as follows: The teeth are influenced by Shen(腎) because they are the end of bone and Biao(標) of Shen. Gingiva is related to Wei(胃) and Da-Chang(大腸) because it is passed by Yangming-Channel(陽明經). The growth and nutrition of teeth depends on Shen. The pathological condition of Shen causes the gingival atrophy, the loose of teeth, dedentition due to aging, withering of teeth, and tartar: whereas the pathological condition of Wei and Da-Chang causes toothache, gingivitis, inflamed gums, bad breath, and gingival hemorrhage. Second, the causes and therapies of dental diseases through the literature can be summarized as follows: The major causes of toothache are the pathogenic condition of wind-heat and wind-cold, the heat syndrome of Wei, the damp-heat of intestine, flaring-up of fire of deficiency type, rotten tooth, etc... The principal causes of dedentition and the shaking and loose of teeth are the deficiency of Shen, and the rest of causes are the damp-heat of Yangming. Gingival atrophy is caused by the deficiency of Shen, whereas the gingival hemorrhage comes from the factors in the pathogenic factor of wind-heat of Yangming-Channel, the heat syndrome of stomach, and the deficiency of Shen. The causes of grinding of teeth during sleeping are stomach-heat, and the delayed dentition and the withering result from the deficiency of Shen-Jing.(腎精) The principal therapies of toothache are removing wind and heat, clearing away heat and prompting diuresis, clearing away the stomach-heat, replenishing vital essence to tonify the Shen, relieving superficial syndrome by wind-cold, and alleviating pain by destroying parasites. For the prescription of the principal therapies, there are Xijio Dihuang Tang, Jiajian Ganlu Yin, Qufeng Wan, Qingwei San, Tiaowei Chenggi Tang Shengong Wan, Liangge San Qingwei Tang Yunu Jian, Liuwei Dihuang Wan Zuogui Yin Bawei Wan Wanshao Dan, Xixin San Badou Wan Gianghuo Fuzi Tang, Jiuzi Tang Badou Wan, etc... The therapies of dedentition and the shaking and loose of teeth are replenishing vital essence to tonify the Shen, and warming and recuperating the Shen-Yang: as the prescription, there are Liuwei Dihuang Wana Zuogui Yin, and Bawei Wan Anshen Wan Wanshao Dan Yougui Wan etc... The therapies of gingival hemorrhage are clearing away the stomach-heat, replenishing vital essence to tonify the Shen, warming and recuperating the Shen-Yang(腎陽), and moisturing and purging intence heat with the prescription of Tiaowei Chenggi Tang Xijiao Dihuang Tang, Liuwei Dihuang Wan Zuogui Yin, Bawei Wan Anshen Wan, and Yunu Jian. The therapy of gingival atrophy is replenishing vital essence to tonify the Shen in the prescription of Liuwei Wan Bawei Wan Ziyin Dabu Wan. The therapies of grinding of teeth during sleeping are clearing away the stomach-heat and purging intense heat, and invigorating the spleen through eliminating dampness in the prescription of Qingwei San, Wumei Wan, etc... The therapy of delaed dentition is replenishing vital essence to tonify the Shen with the prescription of Liuwei Wan Buyin Jian, etc... Third, clinical treatment reports of dental diseases are reviewed as follows: The toothache due to stomach-heat was treated by medical herbs like Gypsum, Natrir Sulfas, Rehmanniae, Schizonepetal Herba, Menthae Folium, Cimicifugae Rhizoma, and Scrophulariae Radix. The therapies of toothache due to flaring-up of fire in deficiency type from deficiency of Shen provided with replenishment of vital essence to tonify the Shen and clean ministerial fire, and the prescription was the kind of Liuwei Wan, which worked very well. The therapy of dedentition and loose of teeth due to deficiency of Shen was done to stablize the teeth as tonifing the Shen with the prescription of Guchi Wan. The rate of imrovement was over 90%. The destruction of periodontal tissue due to periodonititis was cured of dispelling wind, reducing heat, and alleviating pain, It was improved by taking Zizhi Xingiong Tang, Guchi Xiaotong San, Yunii Jian, and Qingwei San about 3-7 days, and the rate of improvement was over 80%. Fourth, the prevention and regimens are reviewed as follows: As a physical and breathing exercise of the teeth, tapping teeth which stimulates the circulation of Qi(氣) and Xue(血) had been used. The tapping time of 14, 17, 36, etc... has been reported, and it should be applied based on the body condition. The medical herbs for gargling and brushing teeth have been used. Specifically, Cimicifugae Rhizoma, Gypsum, Gypsum Fibrosum, and Indigo pulrelrata Lereis have been used to reduce heat, Coptidis Rhizama and Yang Jinggu to eliminate damp-heat, Amomi Semen, Cyperi Rhizoma, Flos Caryophylli, Asari Radix, Piperis Longi Fructus, Santali Albae Lignum, Meliae Fructus, Moschus, Aquillaiae Lignum, and Borneol to promote the circulation of Qi and to relieve pain, Ligustici Radix, Angelice Radix, Rhizoma Nardostachydis, Tribuli Semen to relieve superficial syndrome by means of diaphiresis, and Cnidii Rhizoma, Angelicae sinensis Radix, and Olibanum to promote blood circulation to stop pain.

• 한국식품위생안전성학회지
• /
• 제29권2호
• /
• pp.79-84
• /
• 2014

본 연구는 비가열 섭취 냉동 당근주스의 HACCP (Hazard Analysis Critical Control Point)시스템 구축을 위하여 생물학적 위해요소분석을 위한 목적으로 2013년 6월 21일~2014년 3월 30일까지 약 270일간 제주도 제주시 구좌읍 소재에 있는 구좌농협에서 수행하였다. 일반적인 과채주스 제조업체의 제조공정을 참고로 하여 공정도를 작성하였으며, 원료 농산물(당근), 용수와 포장재료 입고, 보관, 세척, 분쇄, 착즙, 냉각, 내포장, 금속검출, 외포장, 보관 및 출하공정에 대하여 Fig. 1과 같이 작성하였다. 원료 당근의 세척 전, 세척 후의 Coliform group, Staphylococcus aureus, Salmonella spp., Bacillus cereus, Listeria Monocytogenes, 장출혈성대장균수를 측정한 결과 Bacillus cereus 는 세척 전 $4.70{\times}10^4CFU/g$이었으나, 세척 후 $1.02{\times}10^2CFU/g$ 검출되었으며, 나머지 병원성균은 검출되지 않았다. 자외선살균공정에서 당근주스의 유속를 변화시키면서 미생물의 변화를 시험한 결과 유속 4 L/min을 한계기준으로 결정하였다. 작업장별 공중낙하균(일반세균수, 대장균, 진균수) 시험결과 세척실의 미생물수는 20 CFU/Plate가 검출되었다. 작업자 손 세척 전후 시험결과 세척 전 일반세균수가 $6{\times}10^4CFU/cm^2$로 높게 나타났으나 손 세척 후에는 검출되지 않아 손 세척 및 소독에 대한 중요성을 교육하고 훈련해야 할 것이다. 제조설비 및 기구의 표면오염도를 검사한 결과 모든 시료에서 대장균군은 검출되지 않았고, 일반세균은 포장기 노즐에서 가장 많은 $8.5{\times}10^4CFU/cm^2$ 검출되었다. 위해분석 결과 병원성미생물을 예방, 감소 또는 제거할 수 있는 자외선살균 공정이 CCP-B (Biological)로 관리되어야 하고, 한계기준은 유속 4 L/min로 결정하였다. 따라서 Kwon의 유산균을 함유한 녹즙의 HACCP에 관한 연구에서와 같이 자외선살균 공정의 한계기준 및 이탈시 조치방법, 검증방법, 교육 훈련과 기록관리 등 철저한 HACCP 관리계획이 필요할 것으로 생각된다.