• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.10
• /
• pp.1227-1234
• /
• 2012

In this study, fatigue tests were carried out using real-scale pipe bend specimens with wall-thinning defects under a cyclic bending load together with a constant internal pressure of 10 MPa. The wall-thinning defect was located at the extrados and the intrados of the pipe bend specimens. A fully reversed cyclic in-plane bending displacement was applied to the specimens. For the pipe bends with wall thinning at the extrados, an axial crack occurred at the crown of the pipe bend rather than at the extrados where the defect was located. In addition, the fatigue life was longer than that of a sound pipe bend predicted from the design fatigue curve in ASME Sec.III, and it was less dependent on the axial length of the wall-thinning defect. For the pipe bends with wall thinning at the intrados, a circumferential crack occurred at the intrados. In this case, the fatigue life was much shorter than that of a sound pipe bend predicted from the design fatigue curve, and it clearly decreased with decreasing axial length of the wall-thinning defect.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.48-48
• /
• 2011

We have developed a chemically-driven top-down approach using vapor phase HCl to form various GaN nanostructures and successfully demonstrated dislocation-free and strain-relaxed GaN nanostructures without etching damage formed by a selective dissociation method. Our approach overcomes many limitations encountered in previous approaches. There is no need to make a pattern, complicated process, and expensive equipment, but it produces a high-quality nanostructure over a large area at low cost. As far as we know, this is the first time that various types of high-quality GaN nanostructures, such as dot, cone, and rod, could be formed by a chemical method without the use of a mask or pattern, especially on the Ga-polar GaN. It is well known that the Ga-polar GaN is difficult to etch by the common chemical wet etching method because of the chemical stability of GaN. Our chemically driven GaN nanostructures show excellent structure and optical properties. The formed nanostructure had various facets depending on the etching conditions and showed a high crystal quality due to the removal of defects, such as dislocations. These structure properties derived excellent optical performance of the GaN nanostructure. The GaN nanostructure had increased internal and external quantum efficiency due to increased light extraction, reduced strain, and improved crystal quality. The chemically driven GaN nanostructure shows promise in applications such as efficient light-emitting diodes, field emitters, and sensors.

• Korean Journal of Materials Research
• /
• v.16 no.4
• /
• pp.218-224
• /
• 2006

RF sputtering process was applied to produce thin hydroxyapatite(HAp) films on Ti-6Al-4V alloy substrates. The effects of different heat treatment conditions on the hardness between HAp thin films and Ti-6Al-4V alloy substrates were studied. Before deposition, the Ti-6Al-4V alloy substrates were heat treated for 1h at $850^{\circ}C\;under\;3.0{\times}10^{-3}torr$, and after deposition, the HAp thin films were heat treated for 1h at $400^{\circ}C,\;600^{\circ}C\;and\;800^{\circ}C$ under the atmosphere, and analyzed FESEM-EDX, FTIR, XRD, nano-indentor, micro-vickers hardness, respectively. Experimental results represented that the surface defects of thin films decreased by relaxation of internal stress and control of substrate structure followed by heat treatment of substrates before the deposition, and the HAp thin films on the heat-treated substrates had higher hardness than none heattreated substrates before the deposition, and the hardness properties of HAp thin films and Ti-6Al-4V alloy substrates appeared independent behavior, and the hardness of HAp thin films decreased by formation of $VTiO_3(OH),\;{\theta}-Al_{0.32}V_2O_5,\;Al_{0.33}V_2O_5$.

• Design & Manufacturing
• /
• v.10 no.1
• /
• pp.36-40
• /
• 2016

Connectors transmit electric signals to different parts in compact mobile display products. As products that apply this have become lightweight and smaller in size, there are growing demands for smaller and more integrated connectors, which are internal parts of the products. As a measure to address these demands, there is the planar array connector that minimizes the part by arranging the single-direction BTB connectors to two directions. As connectors become smaller in size and more highly integrated, maintaining intensity to prevent defects during impact and maintaining adhesive force to smoothly transmit electric signals are growing in importance. Thus, in order to identify the impact of concave shaping on improving adhesive power in connector terminal pins as a method to increase the connecting power of planar array connector terminal pins, this study predicted and examined the concave shaping method, number of concave shapes, and the adhesive power according to the size of the concave shape through CAE. For concave shaping, the model that added concave shaping towards the lower part of the connector terminal pin and added spokes for the area pressed down by the concave shaping was 0.74 N, showing increased adhesive force compared to existing models. Furthermore, when applying two concave shaping, rather than just one, there was a tendency for adhesive force to increase. In the case of adhesive power trends according to the size of the concave shaping, adhesive power increased and the width of the concave shape decreased, and the biggest adhesive force trends were shown when the concave shaping depth was 0.01mm.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.7
• /
• pp.1013-1020
• /
• 2017

Objective: Stripe marks, which occasionally occur on the shell, do not cause breakage to the shell and shell membranes of eggs. This study investigated the quality of intact eggs (IEs), minor stripe-marked eggs (MEs), severe stripe-marked eggs (SEs), and cracked eggs (CEs) during 3-week storage at $25^{\circ}C$. Methods: Shell eggs were collected the day after being laid and were washed. Among them, eggs without any visual cracks or stripe marks on the shells were evaluated as IEs by the plant employees using candling in a darkened egg storage room; the remaining eggs exhibited some eggshell defects. At day 3, the eggs were further categorized into IEs, MEs, SEs, CEs, and broken eggs (BEs) on the basis of the description given. Except BEs, which were discarded, the remaining eggs were stored at $25^{\circ}C$ (approximate relative humidity 50%) and then analyzed. Results: Stripe marks were observed primarily within the first 3 days after washing. At day 3, CEs had significantly (p<0.05) lower Haugh unit values, but all eggs had grades AA or A, according to the United States Department of Agriculture standard. As storage time increased, differences in egg quality between groups were more obvious. IEs had the highest eggshell breaking strength. During storage, the total plate counts and pathogens, namely Escherichia coli, Campylobacter spp., Staphylococcus aureus, and Salmonella spp., were not detectable in the internal content of IEs and SEs. Conclusion: In conclusion, cracks degraded egg quality severely and minor stripe marks only slightly influenced the egg quality.

• Conservation Science in Museum
• /
• v.6
• /
• pp.3-10
• /
• 2005

In the course of preparing for the transfer of the Boshin-gak Bell, which was designated as Treasure No. 2, due to the transfer of the National Museum of Korea, the current internal cracks and defects in the founding of the bell were examined in order to verify its solidity through γ-ray penetration via ⁶⁰Co. The bell's compositions were also examined with x-ray fluorescence spectroscopy. The result showed that the bell had 65.2% cracks when viewed from the horizontal direction and 62.5% cracks when viewed from the vertical direction. The cracks had approximately 5cm depth. In addition, the result of examining the composition of the bell revealed that it was made of 89~92% copper and 7.5~10.5% tin as well as traces of impurities including 0.1~0.3% lead and not more than 0.1% iron, manganese, etc.

• Journal of Aerospace System Engineering
• /
• v.14 no.spc
• /
• pp.22-30
• /
• 2020

Composite rotor blades for rotorcraft have an intrinsic vulnerability to foreign object impact from its inherent structural characteristics of insufficient strength in the thickness direction, which may easily lead to internal structure damage. Therefore, defects and strength reducing effects caused by foreign object impact should be considered in fatigue evaluation of composite blades. For this purpose, the flaw tolerant safe-life and fail-safe concepts were adopted in fatigue evaluation since 1980s, and recently those concepts have been replaced by the damage tolerance concept. In this paper, the relevant standards for fatigue evaluation are analyzed focusing on fiber reinforced composite rotor blades used in rotorcraft. In addition, fatigue evaluation procedure of composite blades considering impact damages is proposed by reviewing the practices implemented through domestic development projects.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.4
• /
• pp.292-301
• /
• 2001

IDDQ Testing is a very effective testing method to detect many kinds of physical defects occurred in CMOS VLSI circuits. In this paper, we consider the most commonly occurring bridging faults in current CMOS technologies and develop pattern generator for IDDQ testing using efficient IDDQ test algorithms. The complete set of bridging faults between every pair of all nodes(internal and external nodes) within circuit under test is assumed as target fault model. The merit of considering the complete bridging fault set is that layout information is not necessary. Implemented test pattern generator uses a new neighbor searching algorithm and fault collapsing schemes to achieve fast run time, high fault coverage, and compact test sets. Experimental results for ISCAS benchmark circuits demonstrate higher efficiency than those of previous methods.

• Radiation Oncology Journal
• /
• v.3 no.1
• /
• pp.19-28
• /
• 1985

Twenty-four cases of pituitary adenoma, 13 males and 11 females with the age ranging from 11 to 65 years, received radiation therapy(RT) on the pituitary area with 6MV linear accelerator during past 25 months at the Division of Radiation Therapy, Kangnam St. Mary's Hospital, Catholic Medical College. Of 24 cases of RT, 20 were postoperative and 4 primary. To evaluate the effect of RT, we analysed the alteration of the endocrinologic tests, neurologic abnormalities, major clinical symptoms, endocrinologic changes and improvement in visual problems after RT. The results were as follows ; 1. Major clinical symptoms were headache, visual defects, diabetes insipidus, hypogonadisms and general weakness in decreasing order of frequency. 2. All but the one with Nelson's syndrome showed abnormal neuroradiologic changes in the sella turcica with an invasive tumor mass around supra· and para-sellar area. 3. Endocrinological classifications of the patient were 11 prolactinoma, 4 growth hormone -secreting tumors, 3 ACTH-secreting tumors consisting of one Cushing's disease and two Nelson's syndrome, and 6 nonfunctioning tumors. 4. Eleven of 14 patients, visual problems were improved after treatment but remaining 3 were unchanged. 5. Seven of 11 prolactinomas returned to normal hormonal level after postoperative and primary RT and 3 patients are being treated with bromocriptine (BMCP) but one lost case. 6. Two of 4 growth hormone·secreting tumor returned to normal level after RT but the remaining 2 are being treated with BMCP, as well.

• Intestinal research
• /
• v.15 no.1
• /
• pp.75-82
• /
• 2017

Background/Aims: Cyclooxygenase-2 (COX-2), 15-hydroxyprostaglandin dehydrogenase (15-PGDH), and microsomal prostaglandin E synthase-1 (mPGEs-1) regulate prostaglandin $E_2$ ($PGE_2$) expression and are involved in colon carcinogenesis. We investigated the expression of $PGE_2$ and its regulating genes in sporadic human colon tumors and matched normal tissues. Methods: Twenty colonic adenomas and 27 colonic adenocarcinomas were evaluated. COX-2 and 15-PGDH expression was quantified by real-time polymerase chain reaction. The expression of $PGE_2$ and mPGEs-1 was measured using enzyme-linked immunosorbent assay and Western blotting, respectively. Results: The expression of COX-2, mPGEs-1, and $PGE_2$ did not differ between the adenomas and matched distant normal tissues. 15-PGDH expression was lower in adenomas than in the matched normal colonic tissues (P<0.001). In adenocarcinomas, mPGEs-1 and $PGE_2$ expression was significantly higher (P<0.001 and P=0.020, respectively), and COX-2 expression did not differ from that in normal tissues (P=0.207). 15-PGDH expression was significantly lower in the normal colonic mucosa from adenocarcinoma patients than in the normal mucosa from adenoma patients (P=0.018). Conclusions: Early inactivation of 15-PGDH, followed by activation of COX-2 and mPGEs-1, contributes to $PGE_2$ production, leading to colon carcinogenesis. 15-PGDH might be a novel candidate marker for early detection of field defects in colon carcinogenesis.