• 한국전자통신학회논문지
• /
• 제8권10호
• /
• pp.1427-1434
• /
• 2013

본 논문에서는 이동통신용 단말기 PCB Layout 위에 내장형 칩 안테나를 직접 설계하여 DCS(1.71~1.88GHz) 대역, PCS(1.75~1.87GHz) 대역 및 UPCS(1.85~1.99GHz)대역에서 공통으로 사용할 수 있는 이동통신용 트리플밴드 칩 안테나를 설계하였다. 안테나의 특성 해석을 위해서 Single, Dual, Triple Band 안테나를 설계 및 측정하였다. 설계된 안테나들은 제작하여 LTK(Laird Technologies Korea)에서 네트워크 분석기에 의해서 측정되었다. 트리플 광대역 특성은 1.71GHz~1.99GHz의 대역에서 동작하는 설계된 안테나의 측정된 대역폭(V.S.W.R<2.0)을 실현시켰다. 이 안테나의 크기는 $19mm{\times}4mm{\times}1.6mm$으로 설계하여 매우 소형화시켰으며, 칩 안테나의 단점인 좁은 대역폭을 크게 개선시켰다. 그리고 실험 측정 성능들은 시뮬레이션 성능들과 매우 유사함을 보여 주었다.

• Journal of Periodontal and Implant Science
• /
• 제31권2호
• /
• pp.437-449
• /
• 2001

The socket preservation procedure was a simple and effective technique, and has better prognosis for implantation. The socket preservation usually used barrier membrane in combination with/without alloplastic bone materials. A recently study had shown that a regenerative therapy to tooth extraction utilizing growth factors made better results. Platelet-rich plasma was clinically easy method that acquired the growth factors, and is known that accelerated new bone formation and mineralization of bone graft materials. The purpose of this study was to evaluate clinical and histopathologic results which occur following socket preservations using platelet-rich plasma and bovine bone powder. Twelve patients who required extraction of one or more teeth for implantation at the department of periodontics in Dankook University Dental Hospital were selected. Extraction sockets were treated by using platelet-rich plasma and bovine bone powder. 3 months later, we observed clinical and histopathological results as follows: 1. Internal vertical measurement was an average of 7.33mm preoperatively and statistically significantly decreased to an average of 1.42mm postoperatively(p<0.05). 2. External vertical measurement was an average of 3.33mm preoperatively and decreased to an average of 2.75mm postoperatively; therefore there was no significant difference. 3. Horizontal measurement was an average of 7.75mm preoperatively and statistically decreased to an average of 6.08mm postoperatively(p<0.05). 4. Osteocyte-like cells and new bone formation connected with bovine bone grafts were observed in histopathologic examination. This study implied that platelet-rich plasma and bovine bone powder grafts were effective treatment for socket preservation and regeneration of severe bony defect made by implantation failure.

• 조명전기설비학회논문지
• /
• 제15권1호
• /
• pp.44-50
• /
• 2001

현재까지 운전중인 변압기에 전기적인 부분방전 측정기법을 적용하기 위한 가장 큰 문제점은 외부 코로나 노이즈를 제거하는 것이다. 본 논문에서는 외부 코로나 노이즈를 제거하고 변압기 내부의 결함에 의한 부분방전 신호만을 측정하는 기법에 대하여 연구하였다. 현장에서 운전중인 변압기에서의 부분방전과 코로나 노이즈의 발생 형태를 모의하기 위하여 모의 변압기 내에 침-평판 전극을 이용하여 변압기 내부 부분방전을 발생시켰으며, 동시에 변압기 외부의 공기 중에 봉-구 전극을 이용하여 외부 코로나 노이즈를 발생시켰다. 변압기 접지선에 설치한 로고우스키 코일에는 변압기의 내부 결함에 의해 발생되는 부분방전 신호와 외부 코로나 노이즈가 동시에 측정되었다. 변압기 외부에 안테나 센서를 이용하여 외부 코로나 노이즈를 별도로 측정하여, 코로우스키 코일에서 측정된 신호에서 코로나 노이즈를 제거한 결과, 변압기 내부의 부분방전에 의한 신호만을 효과적으로 검출할 수 있었다.

• 한국정보통신학회논문지
• /
• 제13권7호
• /
• pp.1261-1266
• /
• 2009

본 논문에서는 이동통신용 단말기 PCB Layout 위에 내장형 칩 안테나를 직접 설계하여 DCS(1.71${\sim}$1.88GHz) 대역, PCS(1.75${\sim}$1.87GHz) 대역 및 UPCS(1.85${\sim}$1.99GHz)대역에서 공통으로 사용할 수 있는 이동통신용 트리플밴드 칩 안테나를 설계하였다. 안테나의 특성 해석을 위해서 상용 고주파 시뮬레이션인 HFSS를 이용하였다. 트리플 광대역 특성은 1.71GHz${\sim}$1.99GHz의 대역에서 동작하는 설계된 안테나의 측정된 대역폭(V.S.W.R<2.0)을 실현시켰다. 이 안테나의 크기는 19mm${\times}$4mm${\times}$1.6mm로 설계하여 소형화시켰으며, 칩 안테나의 단점인 좁은 대역폭을 크게 개선시켰다. 그리고 실험 측정 결과들은 시뮬레이션 결과들과 매우 유사함을 보여 주었다.

• 대한기계학회논문집A
• /
• 제35권9호
• /
• pp.1119-1129
• /
• 2011

쇼트피닝(shot-peening) 처리를 한 베어링강의 고사이클 피로거동을 연구하였다. 열처리한 베어링강(JISSUJ2) 시험편과 열처리 후 쇼트피닝 표면가공을 추가한 시험편을 사용해 회전굽힘피로시험을 수행하고 파단 된 시험편의 파면을 분석하였다. 시험편의 피로파괴는 표면 결함에서 비롯된 표면 파괴와, 내부의 비금속개 재물에서 비롯된 내부형 파괴의 두 종류로 발생하였다. 내부 파괴의 경우 비금속 개재물 주변에 어안(fisheye) 모양의 파괴양식이 관찰되었다. 개재물은 표면으로부터의 깊이와 형상에 따라 피로 수명에 큰 영향을 주었다. 쇼트피닝 가공을 한 베어링강은 저사이클 하중영역 및 고사이클 하중영역에서 모두 피로수명이 향상되었으며, 하중이 작아질수록 피로수명의 개선은 더욱 커졌다. 또한 2 모수 와이블(Weibull) 분포를 이용하여 베어링강의 확률-응력-수명 (P-S-N) 곡선을 구하여 신뢰도 높은 피로수명 예측을 하였다.

• Design & Manufacturing
• /
• 제15권2호
• /
• pp.30-35
• /
• 2021

The casting method uses a mold to solidify a liquid metal to make a solid metal. Since it uses a liquid metal with the least deformation resistance, it has the characteristic that it can easily manufacture even a complex shape. However, the process of solidifying a liquid metal into a solid metal inevitably involves a volume change and contains internal defects such as shrinkage holes. Therefore, in the design of the casting plan, an excess volume called a pressurization compensates for the volume shrinkage. in the product, and it induces the shrinkage hole defects to occur in parts other than the product1). In this study, casting analysis was performed using casting analysis software (anycasting) in order to optimize the design of the tilting gravity casting method for automobile brackets. In particular, the filling and solidification analysis according to the shape and volume of the pressurized metal was conducted, and applied to the actual product to study the effect of the pressurized metal on the shrinkage defect. Through this study, it is possible to understand the effect of the pressure metal on shrinkage defects in the actual product and propose a design of the pressure metal that improves reliability and productivity.

• Journal of Trauma and Injury
• /
• 제34권4호
• /
• pp.299-304
• /
• 2021

Atypical hemolytic uremic syndrome (aHUS) is a rare, progressive, life-threatening condition of thrombotic microangiopathy characterized by thrombocytopenia, microangiopathic hemolytic anemia, and renal impairment. The mechanisms underlying aHUS remain unclear. Herein, we present the first case in the literature of aHUS after a traumatic injury. A 55-year-old male visited the emergency department after a traumatic injury caused by a tree limb. Abdominal computed tomography revealed a rectal wall defect with significant air density in the perirectal space and preperitoneum, implying rectal perforation. Due to the absence of intraperitoneal intestinal perforation, we performed diverting sigmoid loop colostomy. An additional intermittent simple repair was performed due to perianal and anal injuries. One day postoperatively, his urine output abruptly decreased and serum creatinine level increased. His platelet level decreased, and a spiking fever occurred after 2 days. The patient was diagnosed with acute renal failure secondary to aHUS and was treated with fresh frozen plasma replacement. Continuous renal replacement therapy (CRRT) was also started for oliguria and uremic symptoms. The patient received CRRT for 3 days and intermittent hemodialysis thereafter. After hemodialysis and subsequent supportive treatment, his urine output and renal function improved. The hemolytic anemia and thrombocytopenia also gradually improved. Dialysis was terminated on day 22 of admission and the patient was discharged after recovery. This case suggests that that a traumatic event can trigger aHUS, which should be considered in patients who have thrombocytopenia and acute renal failure with microangiopathic hemolytic anemia. Early diagnosis and appropriate management are critical for favorable outcomes.

• Journal of Genetic Medicine
• /
• 제18권2호
• /
• pp.142-146
• /
• 2021

Alagille syndrome (AGS) is a rare autosomal dominant inherited disorder, with major clinical manifestations of bile duct paucity, cholestasis, cardiovascular anomaly, ophthalmic abnormalities, butterfly vertebrae, and dysmorphic facial appearance. It is caused by heterozygous mutations in JAG1 or NOTCH of the Notch signaling pathway presenting with variable phenotypic penetrance and involving multiple organ systems. The following case report describes a unique case of a 16-year-old female with AGS who presented with the primary complaint of renovascular hypertension. She had a medical history of ventricular septal defect and polycystic ovary syndrome. The patient had a dysmorphic facial appearance including frontal bossing, bulbous tip of the nose, a pointed chin with prognathism, and deeply set eyes with mild hypertelorism. Stenoocclusive changes of both renal arteries, celiac artery, lower part of the abdominal aorta, and left intracranial artery, along with absence of the left internal carotid artery were found on examination. Whole exome sequencing was performed and revealed a pathologic mutation of JAG1, leading to the diagnosis of AGS. Reverse phenotyping detected butterfly vertebrae and normal structure and function of the liver and gallbladder. While the representative symptom of AGS in most scenarios is a hepatic problem, in this case, the presenting clinical features were the vascular anomalies. Clinical manifestations of AGS are diverse, and this case demonstrates that renovascular hypertension might be in some cases a presenting symptom of AGS.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1267-1267
• /
• 2001

The existing fruit sorter has the method of tilting tray and extracting fruits by the action of solenoid or springs. In peaches, the most sort processing is supported by man because the sorter make fatal damage to peaches. In order to sustain commodity and quality of peach non-destructive, non-contact and real time based sorter was needed. This study was performed to develop peach sorter using near-infrared spectroscopy in real time and nondestructively. The prototype was developed to decrease internal and external damage of peach caused by the sorter, which had a way of extracting tray with it. To decrease positioning error of measuring sugar contents in peaches, fiber optic with two direction diverged was developed and attached to the prototype. The program for sorting and operating the prototype was developed using visual basic 6.0 language to measure several quality index such as chlorophyll, some defect, sugar contents. The all sorting result was saved to return farmers for being index of good quality production. Using the prototype, program and MLR(multiple linear regression) model, it was possible to estimate sugar content of peaches with the determination coefficient of 0.71 and SEC of 0.42bx using 16 wavelengths. The developed MLR model had determination coefficient of 0.69, and SEP of 0.49bx, it was better result than single point measurement of 1999's. The peach sweetness grading system based on NIR reflectance method, which consists of photodiode-array sensor, quartz-halogen lamp and fiber optic diverged two bundles for transmitting the light and detecting the reflected light, was developed and evaluated. It was possible to predict the soluble solid contents of peaches in real time and nondestructively using the system which had the accuracy of 91 percentage and the capacity of 7,200 peaches per an hour for grading 2 classes by sugar contents. Draining is one of important factors for production peaches having good qualities. The reason why one farm's product belows others could be estimated for bad draining, over-much nitrogen fertilizer, soil characteristics, etc. After this, the report saved by the peach grading system will have to be good materials to farmers for production high quality peaches. They could share the result or compare with others and diagnose their cultural practice.

• 한국컴퓨터정보학회논문지
• /
• 제14권5호
• /
• pp.37-44
• /
• 2009

최근 멀티미디어 데이터의 품질이 높아짐에 따라 서버는 더 큰 용량의 저장 공간과 더 높은 I/O 대역폭을 요구하고 있다. 이러한 대규모 멀티미디어 서버에서는 각 객체의 인기도에 따른 접근 빈도의 차이로 인한 디스크 간의 부하 균형 문제가 성능에 중요한 영향을 미친다. 따라서 이 문제를 해결하기 위해 여러 데이터 중복 기법들이 제안되었다. 본 논문에서는 멀티미디어 서버에서 사용되는 대표적인 데이터 중복 기법인 동적 중복 기법보다 저장 효율이 뛰어나고 성능이 우수한 이동/중복 기법을 제안한다. 이 기법은 기존 중복 기법의 단점인 각 객체의 복사본 수를 줄임으로써 중복으로 인해 추가로 요구되는 저장 공간을 크게 감소시킨다. 또한 각 객체에 대한 요청들 간의 간격을 줄임으로써 캐슁 효과를 높여서 기존 중복 기법에 비해 동시에 지원할 수 있는 최대 사용자 수를 증가시킨다.