• Title/Summary/Keyword: Intermediate flow

Search Result 337, Processing Time 0.022 seconds

The Effects of Deposition Variables on the Chemical Vapor Deposition of SnO2 (증착변수들이 SnO2 화학증착에 미치는 영향에 관한 연구)

  • 김광호;천성순
    • Journal of the Korean Ceramic Society
    • /
    • v.24 no.6
    • /
    • pp.543-552
    • /
    • 1987
  • The effects of deposition variables on SnO2 CVD were investigated for SnCl4+O2 reaction at 300∼700$^{\circ}C$, Psncl4=1${\times}$10-5∼1${\times}$10-3 atm, and Po2=5${\times}$10-4∼1 atm. A thermodynamic equilibrium study on Sn-Cl-O system has been performed with the computer calculation. The calculation indicates that major species participating the reaction in SnCl4 and not intermediate species, SnCl2. Good uniformity of the film thickness was obtained at the flow rate of 11cm/sec, which resulted from the stable gas flow in our cold wall reactor. The experimental results showed that apparent activation energy of the deposition was about 13.5Kcal/mole below the temperature of 500$^{\circ}C$ and the deposition mechanism was controlled by surface reation. The behavior of deposition rate on the reactant partial pressures could be explained with the Langmuri-Hinshelwood mechanism. X-ray study demonstrated that SnO2 film deposited at temperatures above 400$^{\circ}C$ were polycrystalline with tetragonal rutile structure and grew with (211) and (301) preferred orientations.

  • PDF

Residence Time Effect on the Growth of ZrC by Low Pressure Chemical Vapor Deposition (저압화학기상증착법을 이용한 ZrC 성장에 잔류시간이 미치는 영향)

  • Park, Jong-Hoon;Jung, Choong-Hwan;Kim, Do-Jin;Park, Ji-Yeon
    • Journal of the Korean Ceramic Society
    • /
    • v.45 no.5
    • /
    • pp.280-284
    • /
    • 2008
  • In order to investigate residence time effect on the growth of ZrC film, the ZrC films grew with various system total pressure (P) and total flow rate (Q) by low pressure chemical vapor deposition because residence time is function of system total pressure and total flow rate. Thermodynamic calculations predict that the decomposition of source gases ($ZrCl_4$ and $CH_4$) would be low as increasing the residence time. Thermodynamic calculations results were proved by investigating deposition rate with various residence time. Deposition rate decreased with residence time of source gas increased. Besides, depletion effect accelerated diminution of deposition rate at high residence time. On the other hands, the deposition rated was increased as decreasing the residence time because fast moving of intermediate gas species decrease the depletion effect. The crystal structure was not changed with residence time. However, the largest size of faceted grain showed up to specific residence time and the size of grain was decreased whether residence time increase or not.

DEVELOPMENT OF A MODIFIED $k-{\varepsilon}$ TURBULENCE MODEL FOR VISCO-ELASTIC FLUID AND ITS APPLICATION TO HEMODYNAMICS (점탄성 유체의 난류 해석을 위한 수정된 $k-{\varepsilon}$ 난류모델 개발 및 혈류역학에의 적용)

  • Ro, K.C.;Ryou, H.S.
    • Journal of computational fluids engineering
    • /
    • v.15 no.4
    • /
    • pp.1-8
    • /
    • 2010
  • This article describes the numerical investigation of turbulent blood flow in the stenosed artery bifurcation under periodic acceleration of the human body. Numerical analyses for turbulent blood flow were performed with different magnitude of periodic accelerations using a modified turbulence model which was considering drag reduction of non-Newtonian fluid. The blood was considered to be a non-Newtonian fluid which was based on the power-law viscosity. In order to validate the modified $k-{\varepsilon}$ model, numerical simulations were compared with the standard $k-{\varepsilon}$ model and the Malin's low Reynolds number turbulence model for power-law fluid. As results, the modified $k-{\varepsilon}$ model represents intermediate characteristics between laminar and standard $k-{\varepsilon}$ model, and the modified $k-{\varepsilon}$ model showed good agreements with Malin's verified power law model. Moreover, the computing time and computer resource of the modified $k-{\varepsilon}$ model were reduced about one third than low Reynolds number model including Malin's model.

The Impact of Investor Sentiment on Energy and Stock Markets-Evidence : China and Hong Kong

  • Ho, Liang-Chun
    • Journal of Distribution Science
    • /
    • v.12 no.3
    • /
    • pp.75-83
    • /
    • 2014
  • Purpose - The oil price affects company value, which is the present value of the expected cash flow, by affecting the discount rate and cash flow. This study examines the nonlinear relationships between oil price and stock price using the AlphaShares Chinese Volatility Index as the threshold. Research design, data, and methodology - Data comprise daily closing values of the Shanghai Stock Exchange Composite Index, Shenzhen Stock Exchange Composite Index, and Hang Seng Index of ChinaWest Texas Intermediate crude oil spot price and AlphaShares Chinese Volatility Index from May 25, 2007 to May 24, 2012. The Threshold Error Correction Model is used. Results - The results demonstrate different relationships between the stock price index and oil price under different investor sentiments; however, the stock price index and oil price could adjust to a long-term equilibrium the long-term causality tests between them were all significant. Conclusions - The relationship between the WTI and HANG SENG Index is more significant than the Shanghai Composites Index and Shenzhen Composite Index, when using the AlphaShares Chinese Volatility Index (ASC-VIX) as the investor sentiment variable and threshold.

Aerodynamic Design and Analysis of a Centrifugal Compressor in a 40kW Class Turbogenerator Gas Turbine (40kW급 터보제너레이터용 원심압축기의 공력설계 및 유동해석)

  • Oh, J.S.;Yoon, E.S.;Cho, S.Y.;Oh, K.S.
    • 유체기계공업학회:학술대회논문집
    • /
    • 1998.02a
    • /
    • pp.128-135
    • /
    • 1998
  • Procedures and results of aerodynamic design of a centrifugal compressor are presented for development of a 40kW class turbogenerator gas turbine. Specification of higher level of total pressure ratio of 4 and total efficiency of $80\%$ requires advanced methods of design and analysis. In the meanline design/analysis, a method with conventional loss modeling and a method with the two-zone model are alternately used for more reliable prediction. In the impeller blade generation, a series of Bezier curve are combined to produce meridional contours and distributions of blade camber angle and blade thickness. Intermediate profiles of blades are repeatedly produced and changed to be finally fixed through quasi-three dimensional Euler flow analysis. Three dimensional compressible turbulent flow analysis is then performed for the impeller to be confirmed in the final step of design. Satisfactory results in the aerodynamic performance are obtained, which assures that there is no need of aerodynamic re-design.

  • PDF

Optimization Using Partial Redundancy Elimination in SSA Form (SSA Form에서 부분 중복 제거를 이용한 최적화)

  • Kim, Ki-Tae;Yoo, Weon-Hee
    • The KIPS Transactions:PartD
    • /
    • v.14D no.2
    • /
    • pp.217-224
    • /
    • 2007
  • In order to determine the value and type statically. CTOC uses the SSA Form which separates the variable according to assignment. The SSA Form is widely being used as the intermediate expression of the compiler for data flow analysis as well as code optimization. However, the conventional SSA Form is more associated with variables rather than expressions. Accordingly, the redundant expressions are eliminated to optimize expressions of the SSA From. This paper defines the partial redundant expression to obtain a more optimized code and also implements the technique for eliminating such expressions.

Numerical Comparison of Thermalhydraulic Aspects of Supercritical Carbon Dioxide and Subcritical Water-Based Natural Circulation Loop

  • Sarkar, Milan Krishna Singha;Basu, Dipankar Narayan
    • Nuclear Engineering and Technology
    • /
    • v.49 no.1
    • /
    • pp.103-112
    • /
    • 2017
  • Application of the supercritical condition in reactor core cooling needs to be properly justified based on the extreme level of parameters involved. Therefore, a numerical study is presented to compare the thermalhydraulic performance of supercritical and single-phase natural circulation loops under low-to-intermediate power levels. Carbon dioxide and water are selected as respective working fluids, operating under an identical set of conditions. Accordingly, a three-dimensional computational model was developed, and solved with an appropriate turbulence model and equations of state. Large asymmetry in velocity and temperature profiles was observed in a single cross section due to local buoyancy effect, which is more prominent for supercritical fluids. Mass flow rate in a supercritical loop increases with power until a maximum is reached, which subsequently corresponds to a rapid deterioration in heat transfer coefficient. That can be identified as the limit of operation for such loops to avoid a high temperature, and therefore, the use of a supercritical loop is suggested only until the appearance of such maxima. Flow-induced heat transfer deterioration can be delayed by increasing system pressure or lowering sink temperature. Bulk temperature level throughout the loop with water as working fluid is higher than supercritical carbon dioxide. This is until the heat transfer deterioration, and hence the use of a single-phase loop is prescribed beyond that limit.

Effects of tube-support parameters on damping of heat exchanger tubes in liquids (튜브지지대 인자가 열교환기 튜브의 감쇠에 미치는 영향)

  • 김범식
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.12 no.5
    • /
    • pp.1003-1015
    • /
    • 1988
  • Damping information is required to analyse heat exchangers for flow-induced vibration. The most important energy dissipation mechanisms in heat exchanger tubes are related to the dynamic interaction between tube and support. In liquids, squeeze-film damping is dominat. Simple experiments were carried out of a two-span tube with one intermediate support to investigate the effects of tube-support parameters, such as: tube-support thickness, diametral clearance, tube eccentricity, tube span length, location of tube-support, and nature of dynamic interaction between tube and tube-support. The results show that squeeze-film damping is much larger for lateral-type motion than for rocking-type motion at the support. Eccentricity was found to be very important. Diametral clearance, support thickness and frequency are also very relevant. The effects of these parameters on squeeze-film damping are formulated and proposed in a semi-empirical expression.

CD5+/CD21-Chronic Lymphocytic Leukemia in a Cat

  • Choi, Sorin;Bae, Hyeona;Chun, Daseul;Kim, Jihu;Shin, Sun Woo;Cho, ARom;Jung, Dong-In;Yu, DoHyeon
    • Journal of Veterinary Clinics
    • /
    • v.37 no.6
    • /
    • pp.350-354
    • /
    • 2020
  • Feline chronic lymphocytic leukemia (CLL) is a rare disease. Its diagnosis is not simple because of the absence of clinical signs and the presence of mature lymphocytosis. An 11-year-old female spayed Russian Blue cat was referred to the veterinary medical teaching hospital for lethargy, diarrhea, weight loss, and inappetence. Marked lymphocytic leukocytosis and a significantly increased number of small-to-intermediate-sized lymphocytes in the peripheral blood were found on hematological examination. The results of the feline leukemia virus and immunodeficiency virus test were negative. Further, mild splenomegaly was detected. Bone marrow aspirate analysis revealed mature lymphocytosis and a clonally rearranged T cell receptor gene with the polymerase chain reaction (PCR) for antigen receptor rearrangement assay. Flow cytometric immunophenotyping showed a homogeneous population of CD5+/CD21-T-cells in the peripheral blood and bone marrow. According to the results of the aforementioned examinations, CLL was diagnosed. Treatment was not initiated at the time of diagnosis because the clinical signs were mild and did not affect the quality of life. This report describes the clinical findings and use of advanced diagnostic tools such as molecular clonality analysis and immunophenotyping for the diagnosis of feline CLL.

Peripheral Blood Lymphocytosis without Bone Marrow Infiltration in a Dog with T-Zone Lymphoma

  • YeSeul Jeon;Hyeona Bae;DoHyeon Yu
    • Journal of Veterinary Clinics
    • /
    • v.40 no.3
    • /
    • pp.203-208
    • /
    • 2023
  • A 13-year-old neutered male mixed-breed dog presented with generalized lymphadenopathy and erythematous cutaneous lesions in the ear pinnae. Fine-needle aspiration cytology of the lymph nodes revealed small to intermediate lymphocytes with a "hand mirror" configuration as the predominant cell type. Histopathological analysis of the lymph node showed an infiltrate of CD3-positive small lymphocytes compressing the follicles against the capsule owing to neoplastic cell expansion. Flow cytometric analysis revealed a homogeneous population of CD3+/CD4-/CD5+/CD8-/CD21+/CD34-/CD45- cells in both the peripheral blood and aspirated lymph nodes, which supports the diagnosis of T-zone lymphoma. Laboratory tests revealed lymphocytosis (14,144 cells/µL) in the peripheral blood. However, contrary to expectations, the bone marrow examination revealed no evidence of lymphocytic infiltration. T-zone lymphoma is an indolent lymphoma with a long survival period, and knowledge of its characteristics may affect disease staging and prognosis evaluation. Therefore, peripheral blood count as a sole screening tool for bone marrow metastasis should be used with caution.