• Journal of Astronomy and Space Sciences
• /
• 제15권1호
• /
• pp.1-26
• /
• 1998

The structure of the magnetic funnel element in the intermediate polar is con-sidered in terms of an important site for the X-ray absorption and the reemis-sion of the X-ray as the optical light. In this paper the column density and the optiacl depth vary with the filling factor, which is introduced to characterize the structure of matter in the magnetic funnel element. The results of the en-ergy dopendence of the X-ray spectrum and the modulation depth of the X-ray light curve are discussed.

• 한국세라믹학회지
• /
• 제31권2호
• /
• pp.227-233
• /
• 1994

The Bi-Sr-Ca-Cu-O thin films were deposited by RF-magnetron sputtering method on Si(P-111) wafer without a buffer layer and annealed at various temperatures in oxygen atmosphere. The temperature dependence of electrical resistance, the microstructure of intermediate phase, and the surface morphology of films were examined by four probe method, XRD, and SEM, respectively. The chemical composition and the depth profile of the films were determined by ESCA spectra. Thin films annealed at $600^{\circ}C$ and $700^{\circ}C$ in oxygen atmosphere showed onset temperatures of 90 K and 85K, and Tc(zero) of 22K and 31K, respectively. The sample annealed at $700^{\circ}C$ had the highest volume fraction of superconducting phase and showed smooth microsturcture. In ESCA spectra, the thin films were homogeneous with depth.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.332-338
• /
• 1999

Surface hardening of plain carbon steel (SM$%C) by Laser are usually much finer and stronger than those of the base metals. The present study was undertaken to investigate the wear resistance and a processing parameters such as, power density, pulse width, defocusing distance, and molten depth for surface modification of plain carbon steel. The wear test was carried out under experimental condition using the wear test device, and in which the annular surfaces of wear test specimens as well as mating specimen of alumina ceramics(Al2O3) was rubbed in dry sliding condition. It is shown that molten depth and width depend on defocusing distance. The wear loss on variation of sliding speed was much in lower speed range below 0.2m/sec and in higher speed range above 0.7m/sec, but wear loss was little in intermediate speed range. It depends on oxidation speed and wear speed.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2011년도 추계학술대회
• /
• pp.260-263
• /
• 2011

이 논문에서 제안한 방법은 간단하게 중간 시점 깊이 영상을 생성하는 방법이다. 왼쪽 시점과 오른쪽 시점 두 가지 깊이 영상을 가지고 깊이 값을 계산 한 후 깊이 값과 시점의 이동에 따라 물체의 위치가 변화하는 상관관계를 간단한 식으로 계산해 중간 시점을 만든다. 중간 시점을 생성 한 후, 픽셀 이동에 따른 노이즈 감소 방법을 사용하는 기존 알고리즘 (1)과 이를 수정한 노이즈 감소 방법과 Occlusion영역을 채운 후, 중간 시점을 생성하는 알고리즘 (2)를 사용한다. 우리가 생성한 중간 시점의 PSNR은 알고리즘 (1)는 30.38dB이고, 알고리즘 (2)는 30.52dB이다.

• 한국항만학회지
• /
• 제7권1호
• /
• pp.79-88
• /
• 1993

This study deals with the case of a fixed floating structure(FFS) at the mouth of a rectangular harbor under the action of waves represented by the linear wave theory. Modified forms of the mild-slope equation is applied to the propagation of regular wave over constant water depth. The model is extended to include bottom friction and boundary absorption. A hybrid element approximation is used for calculation of linear wave oscillation in and near coastal harbor. Modification of the model was necessary for the FFS. For the conditions tested, the results of laboratory experiments by Ippen and Goda(1963), and Lee (1969) are compared with the calculated one from this model. The cases of flat cylinderical structures, both fixed and floating, were taken to be in an intermediate water depth.

• 국제강구조저널
• /
• 제18권5호
• /
• pp.1772-1783
• /
• 2018

Nowadays, the researches about composite structure system are being implemented in various fields, and many steel structures are designed based on that. In this study, the bending and seismic performance of the newly developed high-performance cold forming composite beam are evaluated by several experiments. As a result of the bending performance test, the bending moment of beam was increased stably depending on the depth and plate thickness of beam, and it is considered that the bending moment can be evaluated by the equation of a composite beam design. As a result of the seismic performance test, it was verified that sufficient seismic performance was obtained despite the increase of a negative moment rebar and depth of beam. In addition, the nominal bending moment has obtained the strength above the plastic bending moment, and also the plastic rotation angle has satisfied the requirement of composite intermediate moment frame.

• Ocean and Polar Research
• /
• 제24권2호
• /
• pp.153-166
• /
• 2002

Particle fluxes were measured by using time-series sediment traps in the Bransfield Strait from December 27th, 1999 to December 26th, 2000. Total mass fluxes showed distinct seasonal variations with high fluxes in the austral summer and low fluxes in the austral winter at a 678m water depth in the eastern Bransfield Strait, while they were high only in January and fairly low in other months at a 960m water depth in the central Bransfield Strait. The reason that total mass fluxes occurred only in January at a 960m water depth in the central Bransfield Strait seems to be the strong current in the surface waters, which leads to a substantial amount of terrestrial materials and locally produced organic matter being advected away from the mooring site. Total mass fluxes were very high from January to October at a 1678m water depth in the eastern Bransfield Strait, while they were high only in January and February at a 1860m water depth in the central Bransfield Strait. The fact that total mass fluxes were higher at the deep water in the both sites than at the intermediate water depth may reflect that a substantial amount of terrestrial and organic materials are laterally transported by strong tidal current from the shallow environments to the deep basins.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.1148-1155
• /
• 2010

To suggest a modified shallow foundation design method which can be considered the scale effect of foundation on IGM(intermediate geomaterial) soil layer, the weathered soil layer that is uniformly formed up to 8m(2B) with over 50 N-value is selected and 3 times field loading tests are performed on several sized square-shaped shallow foundations with 30, 75, 150, 240 and 400cm in width respectively. Because the soil modulus of elasticity(Es) calculated by soil investigation and 1st field test(PBT) results showed an underestimated tendency, a modified correlation is required for the reasonable estimation of Es on the weathered soil. Also, the N-value was increased with an increasing in depth. However, the N-values around the test foundations showed the different values even though the foundations on the same level because the test site was arranged by excavation. Therefore, the more detail soil investigations are required for the each test foundations respectively. Since Es based on elasticity theory is determined by the stress distribution shape of the foundation and elasticity modulus of the soil, the scale effect considered pressure-settlement curve can be clearly derived from the correlation on stress distribution shape and the variation of soil elasticity modulus with depth. Therefore, the modified correlation will be suggested to estimate a reasonable Es on the weathered soil, and the scale effect considered shallow foundation design method is also developed based on the elastic theory and field tests in this research.

• 한국수산과학회지
• /
• 제53권4호
• /
• pp.572-576
• /
• 2020

As grouper aquaculture production intensifies worldwide, hybrids are increasingly produced to induce heterosis of traits such as rapid growth and strong environmental adaptability. In this study, we compared the morphological characteristics of a hybrid grouper to those of its parent species Epinephelus moara and E. lanceolatus. The coefficients of external and skeletal traits evaluated using soft X-rays did not differ significantly among groups; however, several patterns were detected among measured traits. The body depth (BD), length of caudal peduncle (LCP), and pre-anal fin length (PAL) of the hybrid were the same as those of E. moara, whereas the pre-pectoral fin length (PPL) and interorbital width (IOW) of the hybrid were the same as those of E. lanceolatus. Traits that did not differ significantly among the three groups included pre-dorsal fin length (PDL), pre-ventral fin length (PVL), length of anal fin (LAF), and length of dorsal fin (LDF), whereas the depth of caudal peduncle (DCP) and snout length (SNL) showed intermediate traits, and eye diameter (ED) was significantly smaller in the hybrid. Therefore, intermediate traits such as DCP and SNL and specific traits such as ED may be used as indices for hybrid classification.

• 스마트미디어저널
• /
• 제2권4호
• /
• pp.27-33
• /
• 2013

다시점 영상 시스템은 실감나는 3차원 입체감을 제공하고, 사용자로 하여금 자유로운 시점을 선택할 수 있게 한다. 하지만 한 번에 많은 양의 데이터를 전송하는 것은 어려운 일이므로 두 시점 흑은 세 시점의 영상을 전송하고, 깊이 정보를 이용하여 중간 시점의 영상을 합성하여 제공한다. 본 논문에서는 양안식 영상으로부터 고품질의 다시점 영상을 생성하는 방법을 제안한다. 먼저 스테레오 정합은 폐색 영역을 비롯한 모든 화소들의 정확한 변위 값을 찾을 수 없기 때문에, 배경 값을 이용하여 폐색 영역의 화소들을 처리하는 방법을 제안한다. 또한 합성 영상의 품질을 저하시키는 변위 영상 내의 물체 경계선 불일치 문제점 해결을 위해 결합형 양방향 필터를 적용한다. 마지막으로 불량 화소와 빈 공간때문에 발생하는 오류를 줄이기 위해 신뢰 영상을 이용하여 중간 시점의 영상을 생성한다. 실험을 통해 제안한 방법을 이용할 때 기존의 방법보다 합성 성능이 뛰어남을 확인했다.