• 한국해양학회지
• /
• 제13권1호
• /
• pp.1-8
• /
• 1978

지층 속에 남아 있는 퇴적구조는 퇴적환경을 추정하는 중요한 지표가 된다. 암상이나 화석과는 달리 퇴적구조는 퇴적 현장에서 형성되고 외부로부터 전입될 수는 없기 때문이다. 퇴적구조는 기존 암석이나 퇴적층이 잘 노출되어 있는 노두에서는 쉽사리 연구될 수 있으나 지표면하에 존재하는 퇴적층 구조는 직접적인 방법으로서는 시추에 의해서만 연구될 수 있다. 그러나 지하층을 시추하기에는 시간적 경제적으로 많은 부담이 따르기 때문에 개략조사의 단계에서는 바람직하지 못하다. 탄성파 탐사 방법이 발전됨에 따라 비교적 장파장을 사용하여 얕은 지하층을 탐사할 때 대체적인 지층구조를 파악할 수가 있게 되었다. 이는 각 퇴적층이 Acoustic Impedance를 달리하기 때문에 나타나는 결과이다. 분해능이 50cm정도의 탄성파를 이용한 탄성파 탐사에서 얻어진 탄성파 반사 기록은 이 분해능 범위보다 큰 규모의 해저지층구조를 어느 정도 잘 반영해 준다.

• 신재생에너지
• /
• 제4권2호
• /
• pp.12-20
• /
• 2008

Calculations for the dissolution behavior of liquid CO2 droplets released in the East Sea and the Clipperton Clarion from a moving ship and a fixed pipeline have been carried out in order to estimate the CO2 dissolution characteristics in the ocean. The results show that the injection of liquid CO2 from a moving ship in a high temperature point is an effective method for dissolution. Also, it is noted that the ultimate plume generated from CO2 bubbles repeatsand shrinking due to the peeling from a fixed pipeline, and the presence of hydrate layer on a liquid CO2 droplet acts as a resistant layer in dissolving liquid CO2.

• 방송공학회논문지
• /
• 제2권2호
• /
• pp.125-135
• /
• 1997

This paper is concerned with realistic mainpulation of content in video sequences. Manipulation of content in video sequences is one of the content-based functionalities for MPEG-4 Visual standard. We present an approach to synthesizing video sequences by using the intermediate outputs of three-dimensional (3D) motion and depth analysis. For concreteness, we focus on video showing 3D motion of an observer relative to a scene containing planar runways (or roads). We first present a simple runway (or road) model. Then, we describe a method of identifying the runway (or road) boundary in the image using the Point of Heading Direction (PHD) which is defined as the image of, the ray along which a camera moves. The 3D motion of the camera is obtained from one of the existing 3D analysis methods. Then, a video sequence containing a runway is manipulated by (i) coloring the scene part above a vanishing line, say blue, to show sky, (ii) filling in the occluded scene parts, and (iii) overlaying the identified runway edges and placing yellow disks in them, simulating lights. Experimental results for a real video sequence are presented.

• 대한치과의사협회지
• /
• 제15권11호
• /
• pp.763-766
• /
• 1977

The Purpose of this study was to observe force required to remove some kinds of pin from dentin. The teeth were embedded within a resin cylinder and the occlusal surface was sectioned at a right angle to the axis of the cylinder to expose dentin surface. Thread mate system pin (minim and regular), friction Iocked pin and cemented pin were tested Pin holes were drilled by handpiece and depths of pin holes were tested 1,2 and 3mm. After insertion of the pins into pinhole, tensile loading was performed on the Instron testing machine at the speed of 0.5 inch/min. Results were follewed: 1. In retention, the cemented pins are the least, the friction locked pins intermediate and the self threading pins the greatest in all pins. In self threading pins, regalar pin has greater retention than minim pin 2. The deeper the depth of the pin hole is, the more the retention of the pin increases.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1996년도 제23회 춘계학술대회
• /
• pp.122-127
• /
• 1996

In this paper, the effects of the film tinckness, pre-treatment and testing load on. the tribological characteristics have been studied. During the "Ring on-Disk" testing period silica-gel was used to remove the effect of humidity. As a result, increasing the film thickness revealed prolonged wear life, in the case or reasl the testing loads the dynamic friction coefficient was decreased gradually but in regarding the wear life, an intermideate contact pressure (4kgf/mm${2}$) revealed the maximum value. In regarding the surface protuberance friction an intermediate value of area fraction (60%) revealed maximum wear life. In this paper, the qualitative model in regarding the variation of the friction coefficient andworn depth was presented.presented.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.597-601
• /
• 2008

Calculations for the dissolution behavior of liquid $CO_2$ droplets released in the East Sea and the Clipperton Clarion from a moving ship and a fixed pipeline have been carried out in order to estimate the $CO_2$ dissolution characteristics in the ocean. The results show that the injection of liquid $CO_2$ from a moving ship in a high temperature point is an effective method for dissolution. Also, it is noted that the ultimate plume generated from $CO_2$ bubbles repeatsand shrinking due to the peeling from a fixed pipeline, and the presence of hydrate layer on a liquid $CO_2$ droplet acts as a resistant layer in dissolving liquid $CO_2$.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2011년도 하계학술대회
• /
• pp.361-364
• /
• 2011

이 논문에서 제안한 방법은 간단하게 중간 시점 깊이 영상을 생성하는 방법이다. 왼쪽 시점과 오른쪽 시점 두 가지 깊이 영상을 가지고 깊이값을 계산 한 후 깊이값과 시점의 이동에 따라 물체의 위치가 변화하는 상관관계를 간단한 식으로 계산해 중간 시점을 만든다. 중간 시점을 생성 한 후, occlusion영역을 채우는 방법과 픽셀 이동에 따른 노이즈 감소 방법을 사용한다. 우리가 생성한 중간 시점의 PSNR은 32.255dB이며, $1,920{\times}1,080$ 영상 기준 한 장당 약 0.406s의 생성 속도를 갖는다.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 2006년도 하계종합학술발표회 논문 초록집
• /
• pp.281-281
• /
• 2006

• 천문학회보
• /
• 제35권2호
• /
• pp.37.2-37.2
• /
• 2010

The IMS (Infrared or Intermediate-wide, Medium-deep Survey) program for the search of z~7 quasars has been running since last year. In order to discover enough number of quasars at z~7, a strategy sufficing both survey area (~150 square deg.) and image depth (23 AB mag in J filter), together with using existing multi-wavelength data is chosen. We have been carrying imaging observations with the UKIRT 4m telescope, now covering ~50 square deg. (including UKIDSS survey area) of J-band data. We then used selection in color-color space to choose high-z quasar candidates having the rest-frame Ly-alpha break, and to exclude contamination from stars and galaxies at low-z. We show quasar candidates of redshift z~7 and z~6, out of 25 square deg. data analyzed, and note implications and future plans.

• ALGAE
• /
• 제21권4호
• /
• pp.445-452
• /
• 2006

The morphometry and distribution of the unarmoured dinoflagellates Brachidinium capitatum F.J.R. Taylor, Asterodinium gracile Sournia, Microceratium orstomii Sournia and the toxic species Karenia papilionacea Haywood et Steidinger have been investigated in open waters of the SE Pacific Ocean. The genus Microceratium Sournia is recorded for the first time since the initial description. These taxa showed a high morphological similarity and they may correspond to life stages of a highly versatile single species that is able to project body extensions. Karenia papilionacea showed the higher abundance in the surface waters of the more productive areas (the Marquesas Archipelago and the Perú-Chile Current). Brachidinium capitatum and K. papilionacea often co-occurred, predominating B. capitatum in offshore surface waters. Asterodinium gracile was recorded at the bottom of the euphotic zone (down to 210 m depth), with a shallower distribution in more productive areas. Intermediate specimens of Asterodinium-Brachidinium-Karenia, with variable disposition and size of the body extensions were illustrated.