• Research in Plant Disease
• /
• v.6 no.1
• /
• pp.27-33
• /
• 2000

Population density of Plasmodiophora brassicae in soil of severely infested fields of Chinese cabbage decreased as soil depth increases. More than 97% of total population was found in surface soil (0-5cm depth), and a few resting spores of the pathogen were also detected in 40 cm-deep soil. the clubroot pathogen was evenly distributed over the surface soil without clustering around a Chinese cabbage plant. Density of P. brassicae in soil at 23 Chinese cabbage fields in Pyongchang, Kangwon province ranged widely from less than 10$^4$resting spores/g soil to above 10$\^$6/ resting spores/g soil. Few or none of P. brassicae was found in virgin soil without any cropping history, intermediate with 0.36-2.75$\times$10$^4$resting spores/g soil in fields of other crops but more than 10 times higher population was found in severely infected Chinese cabbage fields. Density of P. brassicae was highest in the fields of monocropping of crucifers with some exceptions, but was low in rotated fields with corn, rye, medicinal crops or other non-host vegetables. Pathoen density in soil was decreased rapidly when rye or medicinal crops were cultivated after Chinese cabbage, suggesting that survival of clubroot pathogen appears to be influenced greatly by cropping system. The improved method for detecting resting spores of P. brassicae in soil used in this study seemed to be adequate for estimating population density of P. brassicae in soil in aspects of clearer dyeing, increased detecting sensitivity, and simplicity in preparation.

• Journal of Korean Society of Steel Construction
• /
• v.25 no.6
• /
• pp.601-612
• /
• 2013

In the present study, details of the TSC beam-to-PSRC column connection for low and middle seismic zones were developed. For ease construction, the top and bottom flanges of the steel section of the TSC beam were discontinuous at the joint face on purpose, while the web passes through the joint. Thus, tensile resistance of the top and bottom flanges is not considered in the calculation of nominal strength of the connection. Cyclic loading tests on two interior connections and an exterior connection were performed to verify the seismic performance. The test parameter for two interior connections was the depth of the TSC beams: 600 and 700 mm including the slab depth. The test results showed that the nominal strength of the connections predicted by KBC 2009 correlated well with the test results. The connection specimens exhibited relatively good deformation and energy dissipation capacities, greater than the requirements for the ordinary and intermediate moment frames. Ultimately, the connection specimens were failed at the story drift ratios of 3.0 to 4.0 % due to local buckling and tensile fracture of the web of the TSC beam passing through the joint. By modifying the existing provisions of ASCE, the joint shear strength of the TSC beam-PSRC column connection was evaluated.

• Korean Journal of Soil Science and Fertilizer
• /
• v.4 no.2
• /
• pp.187-192
• /
• 1971

This paper deals mainly with the genesis and classification of the Jeonnam series. These soils have brown to dark brown silt loam and silty clay loam A horizon(strong brown or reddish brown where eroded). Argillic B horizons are dominantly red or yellowish red silty clay loam to silty clay with moderately developed subangular blocky structure and with thin clay cutans on the ped faces. The C horizons are strongly and very deeply weathered strong brown, yellowish brown, pale brown and reddish yellow silty clay loam and sandy loam granitic saprolite. Content of clay increases with depth to a maximum between 100cm. Percolating water seems to be responsible for transportation and oriented deposition of clay. Chemically, soil reaction is strongly acid to medium acid throughout the profile. The content of organic matter is 1 to 2 percent, and decreases regularly with depth. Base saturation is low, based on amount of extractable cations. Characterisltically the Jeonnam series are similar to Red-Yellow Podzolic soils of the United States and are similar to Red-Yellow soils of the Japan. In the writer's opinion the Jeonnam soils are classified as Red Yellow soils. According to USDA 7th approximation, this soil can be classified as Typic Hapludults and in the FAO/UNESCO World Soil Map as Helvic Acrisols.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.580-586
• /
• 2021

The CAT methodology is a numerical analysis technique using CAE. Recently, a methodology of applying artificial intelligence techniques to a simulation has been studied. A previous study compared the deformation results according to the injection molding process using a machine learning technique. Although MLP has excellent prediction performance, it lacks an explanation of the decision process and is like a black box. In this study, data was generated using Autodesk Moldflow 2018, an injection molding analysis software. Several Machine Learning Algorithms models were developed using RapidMiner version 9.5, a machine learning platform software, and the root mean square error was compared. The decision-tree showed better prediction performance than other machine learning techniques with the RMSE values. The classification criterion can be increased according to the Maximal Depth that determines the size of the Decision-tree, but the complexity also increases. The simulation showed that by selecting an intermediate value that satisfies the constraint based on the changed position, there was 7.7% improvement compared to the previous simulation.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.10
• /
• pp.1540-1547
• /
• 2019

Objective: This study was conducted to evaluate the effects of tannins and cellulase on growth performance, nutrient digestibility, blood profiles, intestinal morphology, and carcass characteristics in Hu sheep. Methods: A total of 48 three-month-old meat Hu sheep ($25.05{\pm}0.9kg$) were blocked based on body weight, and randomly allotted to 4 treatments with 3 replicates of 4 sheep each. The experiment lasted for 80 d, and dietary treatments were as follows: i) CON, control diet; ii) TAN, CON+0.1% tannins; iii) CEL, CON+0.1% cellulase; iv) TAN+CEL, CON+0.1% tannins and 0.1% cellulase. Results: Compared with CON, CEL, and TAN+CEL had greater (p<0.05) final body weight (FBW) and average daily gain but lower (p<0.05) feed conversion ratio, while FBW of TAN+CEL was lower (p<0.05) than that of CEL. The apparent total tract digestibility (ATTD) of dry matter in TAN, CEL, and TAN+CEL groups were higher (p<0.05) than that in CON. CEL and TAN+CEL groups had greater (p<0.05) ATTD of crude fiber compared with TAN and CON, while TAN group had lower (p<0.05) ATTD of crude protein than other treatments. TAN, CEL, and TAN+CEL groups increased (p<0.05) serum globulin and alkaline phosphatase but decreased (p<0.05) albumin/globulin. Serum total protein was greatest for TAN+CEL, intermediate for TAN and CEL and least for CON (p<0.05). TAN+CEL group increased (p<0.05) dressing percentage compared with CON, while the backfat thickness of CEL was lower (p<0.05) than that of CON. The villus height of jejunum and ileum in CEL and TAN+CEL groups were greater (p<0.05) than that in CON, and the crypt depth and villus height: crypt depth of jejunum were increased (p<0.05) in TAN, CEL, and TAN+CEL groups. Conclusion: The addition of tannins and cellulase together promoted nutrient digestion, liver protein synthesis and intestinal development and thus improved growth performance and carcass characteristics.

• The Journal of Engineering Geology
• /
• v.29 no.1
• /
• pp.1-12
• /
• 2019

Earthquake can change underground stress condition around the hypocenter and affect the fracture systems of the rocks. In Korea, the M5.8 Gyeongju earthquake on September 12, 2016 and M5.4 Pohang earthquake on November 15, 2017 occurred inside the Yangsan fault zone and possibly affected the fracture systems in the Yangsan fault zone and nearby rock masses. In this study, the characteristics of the fracture system (fracture orientation, number of the fractures, fracture spacing and aperture, dip angle, fracture density along depth, and relative rock strength) of the rocks in the low/intermediate level radioactive waste repository site located in the coastal area of the East Sea are analyzed by the impact of the Gyeongju and Pohang earthquakes using acoustic televiewer data taken from the boreholes at the radioactive waste repository site in 2005 and 2018. As a result of acoustic televiewer logging analysis, the fracture numbers, fracture aperture, and fracture density along depth overall increased in 2018 comparing to those in 2005. This increase tendency may be due to changes in the fracture system due to the impact of the earthquakes, or due to weathering of the wall of the boreholes for a long period longer than 10 years after the installation of the boreholes in 2005. In the borehole KB-14, on the whole, the orientation of the fractures and the average fracture spacing are slightly different between 2005 and 2018, while dip angle and relative rock strength in 2005 and 2018 are similar each other.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.35 no.6
• /
• pp.155-163
• /
• 2023

A two-dimensional numerical analysis was performed on the depth of pile embedment, the magnitude of the residual water level, and the condition of the presence or absence of cap concrete to understand the behavior of the block-type quay wall with piles. The results showed the control effect of the lateral displacement of the quay wall depending on the embedment of the pile. When the piles were not embedded, the lateral displacement of the quay wall increased proportionally as the residual water level difference increased. In contrast, when the piles were embedded into the ground, the control of the lateral displacement of the quay wall was greatly exerted even if the residual water level difference increased. There was little difference in the lateral displacement of the block-type quay wall regardless of the presence or absence of cap concrete. Under the condition where the piles were embedded down to the rubble mound layer, the piles exhibited the rotational behavior seen in the short piles. As the embedment depth of the piles increased, the piles showed the same bending behavior as the intermediate piles. Thus, the piles significantly contribute to the control of lateral displacement in the block-type quay wall with piles.

• Korean Journal of Ichthyology
• /
• v.2 no.1
• /
• pp.88-94
• /
• 1990

Natural hybrids between Pungitius sisensis sinensis and P. sinensis kaibarae were found in their sympatric area, a streamlet below Chibyon Reservoir in Kangnung city, Kangwondo, Korea. P. sinensis sinensis and P. sinensis kaibarae showed the same electropherograms as reported previously. However, about 10% of the specimens had peculiar banding patterns and they seemed to be hybrid between the two subspecies. They are divided further into two groups: sinensis-type and kaibarae-type hybrid. Two morphometric characters, snout length and depth of caudal peduncle, indicated the hybrid's property well. The color of testis of P. sinensis sinensis and P. sinensis kaibarae was grey and black, respectively, but that of hybrid was intermediate. The problem of reproductive isolation between the two groups raised by the finding of their hybrids was discussed.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.4
• /
• pp.343-350
• /
• 2015

Extensive discussion on the optimal types of offshore wind turbine(OWT) among monopile, tripod and jacket in the intermediate depth of water has been actively carried out in worldwide wind turbine industry. Selecting the optimal types of OWT among several substructural types, it is required to consider the economic and technical feasibility including dynamically stable design of a wind turbine system. In this study, the effects of loading levels and uncertainties of soil properties on the natural frequency of OWT have been quantitatively investigated. In conclusion, the natural frequency of monopile-type OWTs has a significant level of uncertainty, hence it is very important to minimize the level of uncertainties in soil properties when the monopile is selected as a foundation for an OWT.

• The Research Journal of the Costume Culture
• /
• v.24 no.5
• /
• pp.561-576
• /
• 2016

Born in the 19th century as an intermediate between the past and the future, steampunk provides a strong feeling of fantasy. The objective of this research is to understand the utilization of steampunk in all realms through an in-depth literature review and empirical study. Taking the findings as a foundation, we will analyze examples shown in fashion designs that are put into real production, and those designs that can provide inspiration for further design development. The research methodology will constitute a major analysis of advanced research, internet materials, and literature. Photo materials will be collected from professional websites for steampunk. The product method such as follows. Firstly, we will classify the internal meaning of characteristics in steampunk that are similar to the characteristics that are being researched, then take it as the standard and arrange to integrate all five features: restoration, pluralism, duplicity, resistibility and abnormality. We will spread out the design based on images from advanced research. Secondly, in order for to design a steampunk product, I decided on four themes: devastated environment, brutal wars, cool-headed machinery, and the overlap of the future and the past. Inspiration was acquired from representative movies and animations featuring steampunk. Thus, new directions for fashion design with steampunk features can be discovered. It raises the feasibility of this combination in modern society. In the future with the development of technology, it functions as a design that is easy for users to approach.