• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.4
• /
• pp.527-534
• /
• 2011

In this research, the photocatalytic degradation of dibenzothiophene (DBT) in $TiO_2$ aqueous suspension has been studied. $TiO_2$ photocatalysts are prepared by a sol-gel method. The dominant anatase-structure on $TiO_2$ particles is observed after calcining the $TiO_2$ gel at $500^{\circ}C$ for 1hr. Photocatalysts with various transition metals (Nd, Pd and Pt) loading are tested to evaluate the effect of transition metal impurities on photodegradation. The photodegradation efficiencies with $TiO_2$ including Pt and Pd are higher than pure $TiO_2$ powder. Also we investigated the applicability of $H_2O_2$ to increase the efficiency of the $TiO_2$ photocatalytic degradation of dibenzothiophene. The degradation efficiency increases with increasing dosage of $H_2O_2$ in the range of 0.01M to 0.1M . The effect of pH is investigated; we obtained the maximum photodegradation efficiency at pH 5. In addition, the intermediate analysis found dihydroxyl -dibenzothiophene as a reaction intermediate of dibenzothiophene during the photodegradation.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.10
• /
• pp.951-952
• /
• 2000

Acylation of an intermediate tetrahydroxoplatinum(IV) complex, $[Pt(OH)_4(dach)]$ (dach = $trans-(\pm)-12-di-aminocyclohexane)$, with one or two kinds of carboxylic anhydrides in stepwise manner afforded various car-boxylatoplatinum(IV) complexes, $[Pt(O_2CR)\chi(OR’)4-\chi(dach)]$ (R = $(CH_2)_3CH_3$ or $C(CH_3)_3$, R’ = H or $OCCH_3$, and $\chi$ = 1-4) with a wide range of lipophilicity. The title complexes were subjected to bioassay using the murine leukemia L1210 cell line, and in particular, their in vivo oral antitumor activity was attempted to correlate with their lipophilicity and water solubility. The most orally active complex exhibited intermediate lipophilicity and water solubility, but it has been found that an exact relationship between the lipophilicity and oral anticancer activity could not be established, since the lipophilicity of the complexes is not the sole parameter to determine the oral activity. One of the important intermediate complexes partially substituted was subjected to X-ray anal-ysis for positit of the substituted group: $[Pt(OPiv)_3(OH)(dach)]$ crystallizes in the tetragonal sys-tem, space group $P42_1c$ with a = 21.161(3) $\AA$, b = 21.161(6) $\AA$, c = 12.816(3) $\AA$, $\alpha=\beta=$ r $=90^{\circ}$, V = 5739(2) $\AA^3$ and Z = 8.

• Nuclear Engineering and Technology
• /
• v.55 no.7
• /
• pp.2438-2446
• /
• 2023

To cool down a nuclear reactor core and prevent the fuel damage without a pump-driven active component during any anticipated accident, the passive emergency core cooling system (PECCS) was designed and adopted in an advanced light water reactor, i-POWER. In this study, for a validation of the cooling capability of PECCS, thermal-hydraulic integral effect tests were performed with the ATLAS facility by simulating intermediate and small break loss-of-coolant accidents (IBLOCA and SBLOCA). The test result showed that PECCS could effectively depressurize the reactor coolant system by supplying the safety injection water from the safety injection tanks (SITs). The result pointed out that the safety injection from IRWST should have been activated earlier to inhibit the excessive core heat-up. The sequence of the PECCS injection and the major thermal hydraulic transient during the SBLOCA transient was similar to the result of the IBLOCA test with the equivalent PECCS condition. The test data can be used to evaluate the capability of thermal hydraulic safety analysis codes in predicting IBLOCA and SBLOCA transients under an operation of passive safety system.

• Journal of the Korean Ceramic Society
• /
• v.25 no.5
• /
• pp.455-464
• /
• 1988

Concrete used for radwaste container should have excellent properties such as mechanical strength, water-tightness, durability, etc. In order to improve such properties of ordinary portland cement concrete, superplasticizer, steel fiber, and/or epoxy resin were added to ordinary portland cement concrete respectively. Various concrete specimens were prepared and the physical properties of each concrete specimen were tested. From the experimental results, the properties of steel fiber and epoxy resin reinforced concrete were proved to be better qualified than others for low-and intermediate-level radwaste container.

• Ocean and Polar Research
• /
• v.33 no.spc3
• /
• pp.371-383
• /
• 2011

To investigate the physical characteristics and variations of oceanic parameters in the tropical central North Pacific, oceanographic surveys were carried out in summer of 2006 and 2007. The survey periods were classified by Oceanic Ni$\tilde{n}$o Index as a weak El Ni$\tilde{n}$o in 2006 and a medium La Ni$\tilde{n}$a in 2007. The survey instruments were used to acquire data on CTD (Conductivity Temperature and Depth), XBT (Expendable Bathythermograph), and TSG (Thermosalinograph). The dominant temporal variation of surface temperature was diurnal. The diurnal variation in 2007, when the La Ni$\tilde{n}$a weather pattern was in place, was stronger than that in 2006. Surface salinity in 2006 was affected by a northwestward branch of North Equatorial Current, which implies that the El Ni$\tilde{n}$o affects surface properties in the North Equatorial Current region. Two salinity minimum layers existed at stations east of Chuuk in both year's observations. The climatological vertical salinity section along $180^{\circ}E$ shows that the two salinity minimum layers exist in $2^{\circ}N{\sim}12^{\circ}N$ region, consistent with our observations. Analysis of isopycnal lines over the salinity section implies that the upper salinity minimum layer is from intrusion of the upper part of North Pacific Intermediate Water into the lower part of South Pacific Subtropical Surface Water and the lower salinity minimum layer is from Antarctic Intermediate Water.

• Archives of Pharmacal Research
• /
• v.27 no.6
• /
• pp.662-669
• /
• 2004

The highly water-soluble monomethoxypoly(ethyleneglycol) (mPEG) prod rugs of cyciosporin A(CsA) were synthesized. These prod rugs were prepared by initially preparing intermediate in the form of carbonate at the 3'-positions of CsA with chloromethyl chloroformate, in the pres-ence of a base to provide a 3'-carbonated CsA intermediate. Reaction of the CsA intermediate with mPEG derivative in the presence of a base provides the desired water-soluble prod rugs. As a model, we chose molecular weight 5 kDa mPEG in the reaction with CsA to give water soluble prodrugs. To prove that the prod rug is decomposed in the body to produce CsA, the enzymatic hydrolysis test was conducted using human liver homogenate at $37^{\circ}C$. The prodrug was decomposed in human liver homogenate to produce the active material, CsA, and the hydrolysis half-life ($t_{1/2}$) of the prodrug, KI-306 was 2.2 minutes at $37^{\circ}C$. However, a demon-stration of non-enzymatic conversion in pH 7.4 phosphate buffer was provided by the fact that the half-life ($t_{1/2}$) is 21 hours at 37$^{\circ}C$. The hydrolysis test in rat whole blood was also conducted. The hydrolysis was seen with half-life ($t_{1/2}$) of about 9.9, 65.0, 14.2, 3.4, 2.1 9.5, and 1.6 minutes for KI-306, 309, 312, 313, 315, 316, and 317, respectively. This is the ideal for CsA prodrug. The pharmacokinetic study of the prodrug, KI-306, in comparison to the commer-cial product (Sandimmune Neoral Solution) was also carried out after single oral dose. Each rat received 7 mg／kg of CsA equivalent dose. Especially, the prodrug KI-306 exhibits higher AUC and $C_{max}$ than the conventional Neoral. The AUC and $C_{max}$ were increased nearly 1.5 fold. The kinetic value was also seen with $T_{max}$ of about 1.43 and 2.44 hours for KI-306 and Neoral, respectively.

• Geomechanics and Engineering
• /
• v.7 no.3
• /
• pp.317-333
• /
• 2014

The study of the mechanical behavior of rockfill materials under three-dimensional loading conditions is a current research focus area. This paper presents a microscale numerical study of rockfill deformation and strength characteristics using the Combined Finite-Discrete Element Method (FDEM). Two features unique to this study are the consideration of irregular particle shapes and particle crushability. A polydisperse assembly of irregular polyhedra was prepared to reproduce the mechanical behavior of rockfill materials subjected to axial compression at a constant mean stress for a range of intermediate principal stress ratios in the interval [0, 1]. The simulation results, including the stress-strain characteristics, relationship between principal strains, and principal deviator strains are discussed. The stress-dilatancy behavior is described using a linear dilatancy equation with its material constants varying with the intermediate principal stress ratio. The failure surface in the principal stress space and its traces in the deviatoric and meridian plane are also presented. The modified Lade-Duncan criterion most closely describes the stress points at failure.

• Journal of Korean Society on Water Environment
• /
• v.37 no.6
• /
• pp.520-530
• /
• 2021

Multivariate statistical analysis and an environmental hydrological model were applied for investigating the causes of water pollution and providing best management practices for water quality improvement in urban and agricultural watersheds. Principal component analysis (PCA) and cluster analysis (CA) for water quality time series data show that chemical oxygen demand (COD), total organic carbon (TOC), suspended solids (SS) and total phosphorus (T-P) are classified as non-point source pollutants that are highly correlated with river discharge. Total nitrogen (T-N), which has no correlation with river discharge and inverse relationship with water temperature, behaves like a point source with slow and consistent release. Biochemical oxygen demand (BOD) shows intermediate characteristics between point and non-point source pollutants. The results of the PCA and CA for the spatial water quality data indicate that the cluster 1 of the watersheds was characterized as upstream watersheds with good water quality and high proportion of forest. The cluster 3 shows however indicates the most polluted watersheds with substantial discharge of BOD and nutrients from urban sewage, agricultural and industrial activities. The cluster 2 shows intermediate characteristics between the clusters 1 and 3. The results of hydrological simulation program-Fortran (HSPF) model simulation indicated that the seasonal patterns of BOD, T-N and T-P are affected substantially by agricultural and livestock farming activities, untreated wastewater, and environmental flow. The spatial analysis on the model results indicates that the highly-populated watersheds are the prior contributors to the water quality degradation of the river.

• Korean Journal of Veterinary Research
• /
• v.31 no.4
• /
• pp.515-518
• /
• 1991

A field study of Lymnaea viridis, the intermediate host of Fasciola hepatica, was carried out in the eastern Chonnam area. The snail was distributed all over the place. Their major habitats were rice paddies (60.8%), followed by brooks (23.2%), irrigation canals (8.6%), and drains (5.6%). Other minor habitats included natural ponds (1.5%), lakes (0.4%), and rivers (0.1%). L. viridis was living in wet clay soil, occasionally entering water. The snails discharged egg masses when the temperature was $15{\sim}20^{\circ}C$, and the number of the snails was the highest late in October. At $9^{\circ}C$ the snails were not found on the mud: they were present deep in water or at the base of rice stubbles. These hibernation sites were discussed with the epidemiology of fascioliasis.

• Journal of Korean Society of Water and Wastewater
• /
• v.29 no.1
• /
• pp.39-46
• /
• 2015

The degradation characteristics of perchloroethylene by ferrate(VI) oxidation have been studied. The degradation efficiency of perchloroethylene in aqueous solution was investigated at various values of ferrate(VI) dosage, pH, initial concentration of perchloroethylene and aqueous solution temperature. GC-ECD has been used to analyze the changes of perchloroethylene concentration. The optimum conditions of perchloroethylene degradation were obtained at pH 7.0 and $25^{\circ}C$ of aqueous solution temperature. Also, the experimental results showed that perchloroethylene removal efficiency increased with the decrease of initial concentration of perchloroethylene. Lastly intermediate products were identified by GC-MS techniques. Trichloroethylene and chloroform were identified as reaction intermediates.