• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.12 no.2
• /
• pp.54-61
• /
• 1998

Ladder Diagram(LD) is the most extensively used among Programmable Logic Controller(PLC) standard languages for the design of process control system with PLC. But LD has the disadvantages for data processing and maintenance. On the other hand, there is full support for describing sequences so that complete sequential behavior can be easily broken down using a concise graphical language called Sequential Function Chart(SFC). Inspite of those characteristics, SFC is not suitable for describing interlock logic. In this paper, we propose the method for implementing interlock logic by using conventional SFC compiler and verify the effectiveness by applying proposed scheme to the In-Line Spin Coater.Coater.

• The Research Journal of the Costume Culture
• /
• v.25 no.4
• /
• pp.448-457
• /
• 2017

This study aims to analyze the changes in the mechanical properties of interlock fabrics knitted with three types of fibers (i.e., cotton, wool, and polyester) by bonding fusible interlinings with varying deniers (i.e., 10D, 20D, and 30D) for a 3D virtual try-on system. We experimented with four properties and thicknesses of twelve specimens of interlining bonded knitted fabrics including face fabrics and interlinings. The results showed that the tensile property changed values (i.e., LT increased, and WT and RT decreased) according to the denier of interlinings; however, the change was slight. On the other hand, the bending property increased significantly as the denier of the interlining increased on both the wale and the course. Among shearing properties, the value of G increased as the denier of the interlining increased on both the wale and the weft; however, 2HG decreased. Additionally, changes in the compression property varied according to the fibers and the denier of the interlinings. The thickness of the knitted fabrics increased or decreased slightly by bonding the interlining. based on these results, we conclude that the 3D virtual system users need to reflect these numerical changes of interlock fabrics by bonding interlinings when they perform fitting tasks on the screen to accurately express the to accurately express the manufacturing conditions of the real garment.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.1
• /
• pp.170-181
• /
• 1997

The purpose of this study was to determine the effect of knit structure and knit density (machine tightness factor) on the dimensional properties and K1-4 values of weft-knitted fabrics followed over eleven cycles of mechanical relaxation to provide the basic data for constructing weft-knitted fabrics for outwear with excellent dimensional stability The eighteenth weft-knitted fabrics were produced with different knit structure (1$\times$1 rib, half-cardigan rib, half-milano rib, interlock, single pique, crossmiss interlock) and machine tightness factor (loose, medium, tight) for this study. Dimensional properties such as width, lengh, area shrinkage and dimensional parameter (K) of eighteenth knitted fabrics including thickness and bulk property were measured. The results were as follows; 1. The dimensional behavior of the Ix1 rib and interlock in relaxation cycles was anisotropic, i.e., length shrinkage was usually associated with a width expansion, whereas the other weft-kntted fabrics which have tuck or miss loops in the knit structure behaved isotropically, i.e., length and width shrinkages were usually found. It was proposed that the difference in dimensional behavior between these structures was due to the dissimilar nonrelaxed geometrical shapes of the individual structural units forming these weft-knitted structures. The mechanical relaxation shrinkage of weft-knitted cotton fabrics was dependent on the tightness of construction. For a range of fabrics knitted on this study, an increase in fabric tightness caused a decrease in the length shrinkage of the fabric accompanied by an increase in its width shrinkage.

• Journal of the Korean Home Economics Association
• /
• v.26 no.4
• /
• pp.1-13
• /
• 1988

The purpose of this study is to investigate water and after vapor transport characteristics of underwear fabrics. Experimental materials were cotton woven fabric and cotton knitted fabric, nylon tricot (untreated and hydrophilic finished) and cotton/polyester/cotton triple layer. Cotton knitted fabric have three types of knit structure (interlock, rib, plain stitch) and knit with either 38's or 60's combed yarn. And cotton woven fabric have plain weave with 60's combed yarn. As experimental methods, vapor cup test, dynamic method, vertical wicking test and transplanar uptake test were used. The results are as follows. 1) In cotton specimens, the order of water vapor transpiration (wvt) was plain > rib > interlock in the same yarn diameter. The knit fabric of thinner yarn showed the better wvt among the same knit structure. 2) In cotton specimens, the order of water absorbency was interlock > rib > plain in the same yarn diameter. the knit fabric of thicker yarn showed the better absorbency among the same knit structure. 3) When knit fabric (60's plain) is compared with woven fabric 960's plain), knit fabric showed faster rate of wvt, more amount of uptake and slower rate of water uptake than woven fabric did. 4) When compared untreated nylon with hydrophilic finished nylon, hydrophilic finished nylon showed much more water absorbency than untreated nylon did, but showed same rate of wvt. 5) The water transport characteristics of triple layer underwear fabric showed that the thinner and the lighter one, the better wvt and absorbency did.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1992.10a
• /
• pp.125-130
• /
• 1992

If reinforced concrete beam exists crack, ultimate shear transfer strength and shear hardness of section with crack substantially decrease. In this study , five model beams were designed for the objective of clarfying contributions of three shear resistant elements : the compression zone of concrete, dowel action of tension reinforcement, aggregate interlock across cracks, The shear force carried by each resistant element was calculated from the detailed strain data on the contributions to the shear capacity of beams of the shear forces carried by the other three resistant element. The test result follows : 1) Compression zone of concrete (C)-56.2%, 2) Dowel action of tension reinforcement (D)-18.0%, 3)Aggregate Interlock(A)-25.8%.

• Proceedings of the KIPE Conference
• /
• 2017.11a
• /
• pp.121-122
• /
• 2017

ITER AC/DC 컨버터(Converter)는 핵융합 발생을 위해 토카막의 초전도코일에 제어된 전류를 공급하여 플라즈마 발생, 형상 유지, 소멸하는 기능을 한다. 만일 컨버터 또는 초전도코일에 이상이 발생하면 즉시 보호동작이 실행되어야 한다. 이를 위해 설계된 F-LIC(Fast Local Interlock Controller)은 즉시 작동하여 Bypass 및 Make Switch 트리거, 차단기 작동 등을 순차적으로 수행한다. ITER Interlock System의 기기는 중요성이 고려되어 높은 신뢰도가 요구된다. 본 논문에서는 F-LIC 회로분석과 Telcordia SR-332 Standard에 의한 부품고장률 산출방법을 사용하여 FMEDA를 분석하고, 이를 통하여 회로구성 부품의 고장이 미치는 영향과 F-LIC 제어모듈의 SIL-2 등급의 적합성을 분석하였다.

• Journal of the Korean Home Economics Association
• /
• v.17 no.4
• /
• pp.23-28
• /
• 1979

In order to measure the change of constructional and some properties of knitted under wears by laundry, constructional properties, such as fabric count , yarn count, loop length and cover, factor, and some properties , such as shrinkage, tearing, strength, air permeability, electrostatic charge of under wears sold in the market were tested. The results of the experiment can be summarized as follows.1. Interlock and rib were increased in wale direction after laundry and decreased in course direction , plain was decreased, in both direction after laundry. 2. Loop form of plain was changed more than those interlock and rib after laundry. 3. Tearing strength was decreased 51% in wale direction, and 70% in course direction after 20 times laundry. Air permeability was generally increased. 4. Electro static charge was increased 9 times after laundry.

• Proceedings of the IEEK Conference
• /
• 2003.07e
• /
• pp.2391-2394
• /
• 2003

J2ME service technology has advantage that can embody independent and, more soft system in DICOM 3.0 and medicine reflex administration server, client′s OS that is medical treatment reflex standard in radio Internet. Also, intranet that do web based spread, and develop by system that can alternate existent client-server structure rapidly. Specialty, possibility of improvement is much because is connecting being limited in internet environment that medical equipment and information system of various kinds of machine are wire in medical institution and so on. Because do medical treatment reflex transmission module development applying DICOM technology and filtering techniques of "m-PACS" In this research, existence, by interlock in radio usable Mobile reflex conversion system design and embody. That is, patient′s information which is stored to various systems to be transmited and can give big help in medical examination and treatment to reflex client without being wooed doctor′s interpretation result and so on in place through environment to be radish tentacle bar see.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05a
• /
• pp.602-607
• /
• 1995

This article presents safety review experience of microprocessor-based Interposing Logic System(ILS) of Engineering Safety Feature Actuation System(ESFAS). The ILS is the first application of computerized logic design to safety system in Korean nuclear power plants without verification of the system reliability by proven technology concept. As a result of evaluation for the ILS, Korea Institute of Nuclear Safety(KINS) concluded that the microprocessor-based ILS is not acceptable in some features detailed enough to defend against software common mode failures(CMF). Therefore, we required licensee to install hardwired interlock signal configuration and a Hardwired Backup Panel to control safety-related equipment. We believe that the microprocessor-based ILS with the hardwired backup panel and inter-connection of interlock signal by hardwired configuration will improve the plant safety.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2016.01a
• /
• pp.103-104
• /
• 2016

사물 인터넷에서는 대부분의 기기가 와이맥스와 같은 무선 통신을 사용하는데 음영지역이 발생할 경우 펨토셀이 필요하다. 펨토셀은 안전적인 통신을 제공하지만 외부에서 무선 송신을 통해 접근할 수 있어 중간자 공격이 발생하기 쉽다. 강제 지연 인터락 프로토콜은 중간자 공격을 탐지하지만 고정된 지연 시간을 통해 패킷 전송 시간은 일정하다. 본 논문은 평가 함수를 사용하여 동적 지연 시간 결정을 통해 패킷 전달 시간에 대해 감소하는 방법을 제안한다. 이로 인해 제안 기법에서는 지연 시간이 효율적으로 감소하여 전송 속도를 향상한다.