• Journal of the Korea Furniture Society
• /
• v.20 no.3
• /
• pp.232-238
• /
• 2009

In designing furniture and interior accessories, a computer graphic program is normally used over the whole process of manufacturing furniture from idea stage to actual manufacturing stage. It especially play an important role in the modeling process which comes before actual manufacturing stage. in such modeling process, the most important part is expression of quality of material used and surface treatment method. Expression of material quality of wood and surface finishing just like an actual picture enable the designers to analogize the feeling of furniture and interior accessories more exactly over the whole process of actual manufacturing and such a result has positive effect on development field of furniture and accessories.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.920-927
• /
• 2009

Many schedule delays and cost overruns in interior construction are caused by a lack of understanding in detailed and complicated interior works. To minimize these potential impacts in interior construction, a systematic approach for project managers to detect discrepancies at early stages and take corrective action through use of visualized data is required. This systematic implementation is still challenging: monitoring is time-consuming due to the significant amount of as-built data that needs to be collected and evaluated; and current interior construction progress reports have visual limitations in providing spatial context and in representing the complexities of interior components. To overcome these issues, this research focuses on visualization and computer vision techniques representing interior construction progress with photographs. The as-planned 3D models and as-built photographs are visualized in a 3D walk-through model. Within such an environment, the as-built interior construction elements are detected through computer vision techniques to automatically extract the progress data linked with Building Information Modeling (BIM). This allows a comparison between the as-planned model and as-built elements to be used for the representation of interior construction progress by superimposing over a 3D environment. This paper presents the process of representing and detecting interior construction components and the results for an ongoing construction project. This paper discusses implementation and future potential enhancement of these techniques in construction.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.12 no.1
• /
• pp.25-33
• /
• 2012

Ever since the local interior and architecture design industry adopted Digital fabrication modeling tool for its design operation in early 1990's, working environment has been changing. The Purpose of study is to analyze the digital Architecture fabrication modeling for digital design education in academy course. Digital Design Tools, Digital Space and Form, Digital Materiality and Digital Production. The Digital fabrication modeling is and important role in a traditional design process and digital design process. It is comprised of digital input devices(3D digitizer, 3D design tools) and digital output devices(cutting plotters, laser cut, CNC machines, 3D printers). Digital input devices can be shift a traditional design process to digital design process. Digital output devices are the principle of digital fabrication by CAD/CAM. Also, the result of this study provide the fundamental data for physical resources and digital design curriculum in KAAB.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.668-671
• /
• 2010

Comparative study on propellant modeling has been investigated using a non-dimensional method and an one-dimensional method. The propellant location in the chamber can not be described by the non-dimensional method. It is, however, possible for the one-dimensional method to describe. Therefore, the analysis of the interior ballistics according to the propellant arrangements has been performed by the one-dimensional method. The negative differential pressure in the chamber could be predicted and the necessity of the one-dimensional modeling for the analysis of the interior ballistics has been confirmed.

• Korean Institute of Interior Design Journal
• /
• v.13 no.6
• /
• pp.39-47
• /
• 2004

A general hospitals change continuously and rapidly, the way of growth and change becomes an important factor in the interior design. For this purpose, it compares and analyzes the image between different general hospital's ultrasonography with content level in the interior design to aspect investigating the preferences of the patient. Also the field survey on the real users was carried out, asking what kind of interior design you like in the general hospital ultrasonography. These research materials can be utilized for the practice application in the interior design of general hospital ultrasonography with the analyzing each available space. In the survey result, the point on the users needs things which are considered as the most important aspect for the fundamental data for the reasonable design planning and the basic principles of the modeling plan in the hospital's ultrasonography. So this study is to investigate and analyze the characteristics of the waiting area, way finding, color, lighting, counter design. This study would apply to interior design for the modeling of general hospital's ultrasonography.

• Proceedings of the KIPE Conference
• /
• 1998.07a
• /
• pp.332-336
• /
• 1998

Recently, the BLDC(Brushless DC) motor has been increasingly applied to home appliance and the study of BLDC motor drive is extensively processing, so it is necessary to investigate the characteristic of the BLDC motor drive. In this paper, we proposed the modeling of interior permanent - magnet BLDC motor drive. The state model of motor and the model of inverter using pulse width modulation are included. The modeling is verified by the experimental results.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.7
• /
• pp.1069-1076
• /
• 2012

We use largely two methods, how to control the noise of the KTX, they are the passive noise control method and the active noise control method. The passive noise control has been used in a variety of ways since the KTX opening day, but lately it has shown the technical limitations by being dropped sharply. So, it is getting important to conduct the research about ANC that is able to reduce the ambient noise when the environmental-factor changes and be installed easily. To reduce a three-dimensional closed-space sound field like a car of a high-speed rail is hard to do using single channel ANC control system. Therefore we have to model the paths of the noise exactly for reducing the noise. And the control speakers and the error mics should be designed for optimal position. In this paper, we designed the transfer functions for modeling the noise paths under the influence of the distance between control speakers & error mics and primary noise speaker in TEST-BED where there is modeled as actual interior of KTX. We have made the modeling and the simulations of interior environment of KTX car by using three frequency bands of 120Hz, 280Hz, 360Hz. After the modeling, we compared the performance of active noise control and also we analyzed what to affect with difference in distance. After comparing of the performance using Pure Tone 120Hz, 280Hz, 360Hz at each modeling and then we simulated ANC for KTX's interior noise which we measured really and analyzed.

• Journal of KIBIM
• /
• v.12 no.1
• /
• pp.42-54
• /
• 2022

BIM facilitates data transparency and consistency through three-dimensional parametric modeling and promotes the accurate managing and sharing of project information. In Korea, however, BIM-based detailed design of architectural interior finishes required during the Construction Documents phase increases the burden on architectural firms due to frequent design changes and manual workload. Therefore, the purpose of this study was to establish rule-based modules using parametric modeling that automates repetitive tasks that occur during the detailed design of interior finishing. Interviews with practitioners were conducted to analyze the major finishing elements. Of these floors, walls, and ceilings, which were the most rudimentary and common items, were selected as the subjects of the study. The modules developed in this study have two functions. One is to create new finish types, and the other is the automatic modeling of new types into rooms. For these functions, parameters that belonged to each finish and room element in a BIM model were analyzed and valid parameters directly used for parametric modeling were derived. Then, based on these parameters, rule-based modules for three elements, I.e., floors, walls, and ceilings were constructed with Revit Dynamo, and the effectiveness of the modules was verified with a pilot test. In conclusion, this study suggested a series of processes for automatic finishing to improve the efficiency of BIM-based architectural detailed design of finishes and to contribute in solving the chronic problems occuring during current design processes.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.10 no.3
• /
• pp.11-18
• /
• 2010

Cost estimation through fast and correct quantity take offs are crucial in the process of construction project. The existing methods for cost estimation are mainly based on 2D-based drawings and the estimation result tends to be different according to the estimator's experience, the quality and quantity of used information and estimation time. To solve these problems, the domestic construction industry have recently tried to use the data extracted from 3D data modeling based on BIM(Building Information Modeling) in order to achieve more accurate and objective cost estimation. However it tends to increase dramatically the quantity of information that can be used in cost estimation by estimators. Therefore in order to achieve quality information data from 3D data modeling, the characteristics of the project should be reflected on the 3D model and it is most important to extract information only for cost estimation from the whole 3D model fast and accurately. Thus this study aims to propose the 3D modeling method through Data Normalization which maximizes the usability of 3D Data modeling in cost estimation process.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.2 no.2
• /
• pp.96-103
• /
• 2010

A concept of preliminary design for mid-size superyachts is explored. First, the profile of a superyacht is interactively designed with the help of freeform curve functionality and graphical user interface (GUI) based interaction. The hull form is then constructed using major characteristic curves such as design waterline, deck sideline, and sections in addition to the predefined profile curve. After exterior hull modeling is done, the arrangement of significant interior spaces of all decks is carried out. A genetic algorithm is exploited to find a space arrangement by considering space fitness values, space proximity, and stairs connectivity of relevant spaces. A goal of the paper is to offer a step-by-step procedure for superyacht design from scratch or when initial information is not sufficient for complete design. For this purpose, a GUI based superyacht design system is developed. This design approach is expected to help users interactively design mid-size superyachts.