• 한국의상디자인학회지
• /
• 제11권1호
• /
• pp.169-179
• /
• 2009

In order to preserve the Korean traditional gold foil, to develop as Korean traditional textile art by utilizing in modem fashion for textile industry, and to examine utility of the material which can be used in the modem wearing, interior goods and fashion terms, Textiles Applied Korean Traditional Gold Foil were developed. The results are as follows: First, important factors of the gold foil image should be extracted as materials quality, color and pattern, and modem and practical qualities should be proceeded when developing the image of the gold foil into modem quality material. Second, since gloss of fabric developed by a traditional method is somewhat strong, uniformity being a little bit low for hand-made manufacturing, and practical quality is low for high cost, deletion of the gold foil, etc. So it hasn't been appropriate for studying modem fashion material. Third, Jacquard weave has been examined as the most appropriate method in order to present the gold foil image among a number of textile manufacturing techniques Fourth, considering factors deciding the image of the gold foil and a sense of beauty of modem society, gloss of the foil has been lessened by expressing pattern to lower traditional quality and primary color. Fifth, pattern motives of developed materials have been extracted tram traditional gold foil patterns, and materials have been chosen considering of concepts and motives, and dragon pattern, crane pattern and bat pattern, Sixth, wearing, pin-up works, bed linen, fabrics for chairs, ties, bags, shoes, umbrellas, etc. are produced with the developed materials, and practical use and modern quality have been examined. The result is very satisfactory.

• Ocean Science Journal
• /
• 제40권2호
• /
• pp.67-78
• /
• 2005

Complex physical, chemical and biological interactions off the Korean coast created several striking patterns in the phytoplankton blooms, which became conspicuous during the measurements of ocean color from space. This study concentrated on analyzing the spatial and temporal aspects of phytoplankton chlorophyll variability in these areas using an integrated dataset from a Sea-viewing Wide Field-of-view Sensor (SeaWiFS), Advanced Very High Resolution (AVHRR) sensor, and Conductivity Temperature Depth (CTD) sensor. The results showed that chlorophyll concentrations were elevated in coastal and open ocean regions, with strong summer and fall blooms, which appeared to spread out in most of the enclosed bays and neighboring waters due to certain oceanographic processes. The chlorophyll concentration was observed to range between 3 and $54\;mg\;m^{-3}$ inside Jin-hae Bay and adjacent coastal bays and 0.5 and $8\;mg\;m^{-3}$ in the southeast sea offshore waters, this gradual decrease towards oceanic waters suggested physical transports of phytoplankton blooms from the shallow shelves to slope waters through the influence of the Tsushima Warm Current (TWC) along the Tsushima Strait. Horizontal distribution of potential temperature $(\theta)$ and salinity (S) of water off the southeastern coast exhibited cold and low saline surface water $(\theta and warm and high saline subsurface water $({\theta}>12^{\circ}C; S>34.4)$ at 75dBar, corroborating TWC intrusion along the Tsushima Strait. An eastward branch of this current was called the East Korean Warm Current (EKWC), tracked with the help of CTD data and satellite-derived sea surface temperature, which often influenced the dynamics of mesoscale anticyclonic eddy fields off the Korean east coast during the summer season. The process of such mesoscale anticyclonic eddy features might have produced interior upwelling that could have shoaled and steepened the nutricline, enhancing phytoplankton population by advection or diffusion of nutrients in the vicinity of Ulleungdo in the East Sea.

• 한국의류학회지
• /
• 제32권5호
• /
• pp.808-820
• /
• 2008

The costume of Islam cultural area has been affected by the strict social structure, formed by religion, and traditional costume of Islam has been maintained up to these days under the influence of religion. Islam Traditional Costume, which is the succession of the traditional costume of southwest Asia region, became armed with the form of closed costume due to the chastity and oppression. There are figurative features of Islam Folk Costume; first, the dimensional form due to the ampleness, covering the body, second, the reinforcement of closed form such as chador and burqa, third, the symbolism such as the adornment or incantational ornament, which has been inherited from the former times of Islam era, fourth, the color, simplified with black and white. The aesthetic values of Islam folk costume are represented with 'The beauty of abstinency', suppressing the ornamentation and color, caused by the strict social atmosphere under the influence of the form of traditional costume and religion, 'The beauty of concealment' due to the closeness, with affluent costume forms, covering the body and even concealing the face, and 'The beauty of symbol' which is demonstrated with incantational ornamentation of face and interior decoration. In some nations amongst Islam nations, the wearing of hijab is strictly regulated but black chador and burqa are regarded as negative symbols, representing the closeness and oppression of Islam. It is the product of Orientalism from the western perspective. The Islam Hijab culture is the symbol of oppression towards women, but, on the other hand, it is the device to protect women and the traditional culture, symbolizing the identity.

• 한국전기전자재료학회논문지
• /
• 제26권1호
• /
• pp.22-26
• /
• 2013

PTCR ceramics of $(Ba_{0.998}Sm_{0.002})TiO_3+0.001MnCO_3+xSiO_2$ (x=1, 2, 3, 4, 5, 6 mol%) were fabricated by solid state method. Disk samples of diameter 5 mm and thickness about 1mm were sintered at $1,290^{\circ}C$ for 2 h in reduced atmosphere of $5%H_2-95%N_2$ followed by re-oxidation at $600^{\circ}C$ for 30 min. in $20%O_2-80%N_2$.and their microstructures and electrical properties were investigated with SEM and Multimeter. The color of sintered samples was strongly dependent on $SiO_2$ content showing that the color of samples with $SiO_2$ of 1~2 mol% was gray but that of samples with $SiO_2$ of 4~6 mol% was changed from gray to blue, which seems to be related with the reduction of samples due to the oxygen vacancies created during the sintering in reduced atmosphere. $SiO_2$ content had a great influence on the microstructure and the electrical properties. With increasing $SiO_2$ content, the grain size of samples increased and the resistivity as well as the resistivity jump ($R_{285}/R_{min}$) decreased, which is considered to be attributed to the resistivity change at grain interior and grain boundary due to the fast mass transfer through $SiO_2$ liquide phase during the sintering. Samples with 2 mol% $SiO_2$ has the resistivity of $202{\Omega}cm$ and the resistivity jump of 3.28. It is expected that $SiO_2$ doped $BaTiO_3$ based PTC ceramics can be used for multilayered PTC thermistor due to the resistance to the sintering in reduced atmosphere.

• 한국산학기술학회논문지
• /
• 제13권8호
• /
• pp.3800-3805
• /
• 2012

본 논문에서는 도심 열섬현상 방지 및 에너지 효율을 높이기 위하여 적외선 반사율이 30%이상인 건물 내 외장재용 흑색 차열안료 및 도료에 대한 연구를 하였다. 안료는 $Fe_2O_3$과 $Cr_2O_3$의 혼합원료를 $900{\sim}1,200^{\circ}C$에서 소성하여 합성하였으며, 도료는 합성한 안료에 아크릴수지와 기타첨가제를 사용하여 제조하였다. 연구결과, Cr과 Fe을 1:0.9 몰비로 혼합하여 $1,000^{\circ}C$에서 소성한 안료의 발색도가 가장 우수하였고, 차열안료 20%에 분산제 1.5%를 첨가하여 제조한 차열도료로 $125{\mu}m$ 두께의 도막을 형성시켰을 때 적외선 반사가 가장 우수하였다. 차열도료와 일반도료의 표면온도 차이는 $36.5^{\circ}C$로 나타났으며 700~2,500nm 파장대의 적외선 반사율(TSR)은 39.3%로 측정되었다. 또한, 500시간의 내후성 평가에서 색상변화는 거의 나타나지 않았다.

• 한국환경복원기술학회지
• /
• 제7권6호
• /
• pp.49-53
• /
• 2004

This study was aimed to promote evergreen ferns native to Korea as a material for interior landscape by investigate effects of light quality on the growth of Cyrtomium falcatum and Rumohra aristata, in an indoor environment that artificial light was used, especially. Result of experiments are as follows; 1. Wavelengths were measured as control(=570~580nm), red(=600~610nm), yellow(=550~580nm), green(=500~510nm) and blue(=430~440nm) between different color film. The order of photon flux density was red>yellow>control>green>blue decreased. 2. Although there was no difference in the growth of Cyrtomium falcatum depending on light quality, in case of fronds with sori and new fronds, there were highest under red film. Fresh weight was no significant in all treatments, but dry weight was increased with green>control>yellow>blue>red in order. 3. In case of Rumohra aristata, there was no difference in its growth, however, number of total fronds was highest under green film. Although fresh weight was increased with yellow film, dry weight was highest under green film.

• 한국자동차공학회논문집
• /
• 제18권5호
• /
• pp.9-19
• /
• 2010

Every car manufacturer desires to reduce the new car development time spent in improving the safety, NVH, lightweight, reliability and environment friendly features of the car. Other considerations such as planning, exterior and interior styling, packaging, color, and material selection increase the complexity of the car design process. This paper proposes a personal DDP (Digital Design Process) to utilize the engineering analysis and design/styling software for car design. DDP can be efficiently used by a team of car research center or a studio with small number of engineers, helping ordinary engineers becoming ambidextrous in design as well as engineering applications. The concept model starts from idea sketch, rendering, and 3D surface model with CAS (Computer Aided Styling) to the final safety estimation by using proposed DDP based on engineering technology (CAD, CAE). The concept model proposed a hydrogen fuel cell sports coupe which could be available within next 10 years. The proposed DDP can not only reduce the new car development time but also be adapted into designing of varied products such as aircraft, yacht, electrical equipment and sports gear.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 춘계 학술기술논문발표대회 논문집
• /
• pp.185-190
• /
• 2005

Safe, economical and environment-friendly tunnel construction are required again along with social continuous development, the importance of waterproof work that is portion that actually all of user and builder can find that is embossed by tunnel construction's one of important construction. Also, ECB (Ethylen Copolymer Bitumen) sheet that is used in existing tunnel waterproofing method (ECB waterproofing method) being black because asphalt (Bitumen) is added, by purpose that make illumination of tunnel interior brightly and scar discovery eases in sheet with coating white film, but ECB that is used present according as ECB that asphalt is added does not satisfy high tensile strength of construction field, quality standard of extension. Also ECB denigrates color of black M/B that asphalt is excepted.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 추계학술대회 논문집
• /
• pp.197-200
• /
• 2009

주광의 색온도와 일치하는 실내 전반 조명용 60W급 LED 조명제품 개발하기 위하여 실내 주광에 적합한 LED를 선정하고, 색온도, 광색제어를 위한 구동회로 및 제어회로를 설계 제작 하였다. 그리고 1W급 Cool White, Warm White Package LED 총 168 EA를 적용하여 주광의 색온도와 일치하는 실내전반 조명용 LED 조명 System 을 개발하였다. 주광의 색온도와 일치하는 실내 전반용 LED 조명제품은 60W급 LED SMPS 구동회로 및 광색/색온도 제어회로 설계, 면발광을 위한 방열 설계 및 기구 구조 설계를 통하여 개발되었으며, 직접 시제품을 제작하고 그 성능을 측정하였다. 그 결과 회로 효율은 85% 이상, 색온도는 $3,000{\sim}7,000K$에서 실시간으로 제어 가능 하고, 원하는 색온도을 구현 할 수 있도록 하였으며, 발산각 또한 최대 광도의 1/2 기준으로 $100^{\circ}$ 이상을 만족시켰다.

• 한국주거학회논문집
• /
• 제12권4호
• /
• pp.73-81
• /
• 2001

The purpose of this study was to carry out POE of assisted living housing and suggest the design guidelines for the housing complex for the elderly. The subjects were residents(old persons) and staff who lived or worked in three assisted living housing in Cincinnati, Ohio. Interview and survey method using questionnaire were used. The design guidelines for the housing for the elderly were suggested as follows: 1) the location of the housing for the elderly should be in or near the existing housing area, 2) the arrangement of spaces of the housing for the elderly should consist of small groupings rather than large and long corridor pattern, 3) the number of the housing units for the elderly should be small, under 100 units, 4) the housing units should be used by one older persons so that she/he could have the chance of privacy and personalization, 5) various common spaces such as art and craft room or game room should be provided, 6) accessibility should be considered, 7) the color and patterns of interior finishes should be differentiated according to floors or spaces and familiar ones should be used to make a homelike environment.