• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.6A
• /
• pp.371-378
• /
• 2003

In Code Division Multiple Access (CDMA) system, the cell capacity is defined as the number of available channels in a cell, which is limited by the interferences. When a new call is accepted at its home cell, this adds the interference to the home and its neighboring cells. This paper proposes a call admission control based on mobile transmission power prediction. The home cell has enough capacity to admit new call and if home cell would have admitted a new call, it calculates the mobile transmission power. Also, its neighboring cell can predict the amount of interference using the predicted mobile transmission power. Thus, the new mobile is accepted by its home cell if QoS(Quality Of Service) is guaranteed in its neighboring cells. The simulation result shows that the proposed scheme largely reduces the outage probability in the neighboring cells.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2087-2089
• /
• 2003

The presence of narrowband interference (NBI) in Direct-sequence code division multiple access (DS/CDMA) systems is an inevitable problem when the interference is strong enough. The improvement in the system performance employs by adaptive narrowband interference suppression techniques. Basically there have been two types of method for narrowband interference suppression estimator/subtracter approaches and transform domain approaches. In this paper the focus is on the type of estimator/subtracter approaches. However, the binary direct sequence (DS) signal, that acts as noise in the prediction process is highly non-Gaussian. The case of a Gaussian interferer with known in an autoregressive (AR) signal or a digital signal and also in a sinusoidal signal (Tone) that included in is paper. The proposed NBI suppression is presence in an adaptive IIR notch filter for lattice structure and more powerful by using a variable step-size algorithm. The simulation results show that the proposed algorithm can significantly increase the convergence rate and improved system performance when compare with adaptive least mean square algorithm (LMS).

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.1
• /
• pp.49-54
• /
• 2013

Japan and South Korea since 2004 until now for the broadcast channel interference, by measuring the ongoing conflict are expected to prepare for the future, but Korea's preparation are not enough. In this study, it is pointed that cause of the interference through channel environmental analysis, and effective application of propagation prediction model was carried out between neighboring countries. Between Korea and Japan, radio duct occurs on hold due to changes in the refractive gradient, and comfirmed occurrence of broadcasts interference. The results are presented that 1% time variable, -91.80 [N-units/km], 10% time variable, -43.92 [N-units/km], 50% time variable, -586.19 [N-units/km], for effective refractive gradient. Proposed refractive gradient could contribute to actual radio propagation prediction.

• Computers and Concrete
• /
• v.12 no.6
• /
• pp.775-783
• /
• 2013

A novel reliability-based work model of k/n (G) system has been developed. Unit failure probability is given based on the load and strength distributions and according to the stress-strength interference theory. Then a dynamic reliability prediction model of repairable k/n (G) system is established using probabilistic differential equations. The resulting differential equations are solved and the value of k can be determined precisely. The number of work unit k in repairable k/n (G) system is obtained precisely. The reliability of whole life cycle of repairable k/n (G) system can be predicted and guaranteed in the design period. Finally, it is illustrated that the proposed model is feasible and gives reasonable prediction.

• Proceedings of the KIEE Conference
• /
• 1999.11c
• /
• pp.769-771
• /
• 1999

In general, the most of GIS is only deal with the material and geometric data which are position, radius, length etc except a corrosion data. In present, the owner of metallic structures having an interest in that my structures do corrode or not and how many life time is there? So, we need the development of GIS interconnected corrosion prediction system on the view point of the efficiency of operation and the protection for big accident. The results of development of its system are described in this paper. It can do life prediction and interference analysis and also newest corrosion data should be updated regularly.

• Structural Engineering and Mechanics
• /
• v.45 no.2
• /
• pp.201-209
• /
• 2013

A new dynamic reliability analysis of structure under repeated random loads is proposed in this paper. The proposed method is developed based on the idea that the probability density of several times random loads can be derived from the probability density of single-time random load. The reliability prediction models of structure based on time responses under several times random loads with and without strength degradation are obtained by using the stress-strength interference theory and probability density evolution method. The resulting differential equations in the prediction models can be solved by using the forward finite difference method. Then, the probability density functions of strength redundancy of the structures can be obtained. Finally, the structural dynamic reliability can be calculated using integral method. The efficiency of the proposed method is demonstrated numerically through a speed reducer. The results have shown that the proposed method is practicable, feasible and gives reasonably accurate prediction.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.38 no.3
• /
• pp.347-354
• /
• 2014

The color appearance of a yarn-dyed woven fabric depends on the color of the yarn as well as on the weave structure. Predicting the final color appearance or formulating the recipe is a difficult task, considering the interference of colored yarns and structure variations. In a modern fabric design process, the intended color appearance is attained through a digital color methodology based on numerous color data and color mixing recipes (i.e., color prediction models, accumulated in CAD systems). For successful color reproduction, accurate color prediction models should be devised and equipped for the systems. In this study, the final colors of yarn-dyed woven fabrics were predicted using six geometric-color mixing models (i.e., simple K/S model, log K/S model, D-G model, S-N model, modified S-N model, and W-O model). The color differences between the measured and the predicted colors were calculated to evaluate the accuracy of various color models used for different weave structures. The log K/S model, D-G model, and W-O model were found to be more accurate in color prediction of the woven fabrics used. Among these three models, the W-O model was found to be the best one as it gave the least color difference between the measured and the predicted colors.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.6_2
• /
• pp.623-629
• /
• 2012

During the construction of crossing engineering one of the important measures to ensure the safety of subway operation is the implementation of deformation surveying to the existing subway tunnel. Guangzhou new subway line 2 engineering which crosses the existing tunnel is taken as the background. How to achieve intelligent and automatic deformation surveying forecast during the subway tunnel construction process is studied. Because large amount of surveying data exists in the subway construction, deformation analysis is difficult and prediction has low accuracy, a subway intelligent deformation prediction model based on the PBIL and support vector machine is proposed. The PBIL algorithm is used to optimize the exact key parameters combination of support vector machine though probability analysis and thereby the predictive ability of the model deformation is greatly improved. Through applications on the Guangzhou subway across deformation surveying deformation engineering the prediction method's predictive ability has high accuracy and the method has high practicality. It can support effective solution to the implementation of the comprehensive and accurate surveying and early warning under subway operation conditions with the environmental interference and complex deformation.

• Journal of the Korean Institute of Gas
• /
• v.4 no.3 s.11
• /
• pp.39-45
• /
• 2000

In general, most of the GIS only deal with materials and geometric data which just include position, radius, length of the structure. Therefore it's hard to get corrosion data from it. But the one that an owner of metallic structures want to know is the integrity of the structure. Cathodic Protection System can not protect corrosion on the underground facilities perfectly but protect corrsion effectively. It therefore is necessary to monitor the facilities continually So, we need the development of GIS interconnected a corrosion prediction system on the view point of the efficiency of operation and the protection for a big accident. The results of the development of its system are described in this paper. It can do life prediction and interference analysis and also newest corrosion data should be updated regularly.

• Journal of electromagnetic engineering and science
• /
• v.5 no.3
• /
• pp.140-145
• /
• 2005

In this paper, an experimental investigation for return loss and a software-based prediction for interference level of single-packaged filtering antenna composed of dielectric waveguide filter and PCB(Printed Circuit Board) slot antenna in transceiver module have been carried out with several different feeding structures in millimeter-wave regime. The implementation and embedding method of the existing air-filled waveguide filters working at millimeter-wave frequency on general PCB substrate have been described. In a view of the implementation of each components, the dielectric waveguide embedded in PCB and LTCC(Low Temparature Co-fired Ceramic) substrates has employed the via fences as a replacement with side walls and common ground plane to prevent energy leakage. The characteristics of several prototypes of filtering antenna embedded in PCB substrate are considered by comparing the wideband and transmission characteristics as a function of bent angle of transmission line connecting two components. In addition, as an essential to the packaging of transceiver module working at millimeter-wave, miniaturization technology maintaining the performances of independent components and the important problems caused by integrating and connecting the different components in different layers are described in this paper.