• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2009년도 정보통신설비 학술대회
• /
• pp.242-247
• /
• 2009

In this paper, we investigate interference between short-range radiocommunication devices (SRDs) with frequency hopping spread spectrum (FHSS) and direct sequence spread spectrum (DSSS) methods when they are in the same frequency bands. In order to analyze interference from unwanted emission of SRD with DSSS to that of FHSS, Monte-Carlo (MC) simulation method is employed and interference probabilities are calculated. We simulate interference scenarios in accordance with several duty cycles and bandwidths. It is also assumed that the propagation model is free space The effect of distance between interfering transmitter and victim receiver is analyzed and bit error rate (BER) is simulated. From the interference analysis results, it is shown that duty cycle affects compatibility more than bandwidth does. Also, we can make sure of the separation distance which satisfies BER criterion when there are only one interfering transmitter and multiple interfering transmitters.

• 한국생산제조학회지
• /
• 제8권6호
• /
• pp.105-112
• /
• 1999

In this paper we deal with tool interference problem in the case of compound surface machining. A new tool interference detection and correction method based on the envelope of the tool path is suggested to identify and correct the tool interference - not only within the local path of tool movement, but also outside of the tool path. Therefore, the developed strategy can be used to check the possible interference in any region of the surface. In order to analyze quantitatively the milled surface error produced by the tool interference, improved surface prediction model is also suggested in cutting process by general cutters. The effectiveness of the proposed method is demonstrated through simulation study.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.67-70
• /
• 1998

In this paper, an interference analyzer for communication and/or broadcasting services is developed and presented based on Monte Carlo technique, which is now under study in the International Telecommunication Union(ITU). Monte Carlo technology is a statistical approach which functions by considering many trials. For each simulation trial, a scenario is built up using a number of different random variables, such as signal and interference strengths, transmitting and receiving antenna heights, antenna gains, etc.. Furthermore, this paper shows and application example of the analyzer to examine interference influence of the PCS(IS-95) base stations affecting to the IMT-2000 FDD base station, depending on serveral service environments like rural, suburban, and urban areas. The wave propagation model used in this simulation is the modified Hata model, which is known to the suitable to Korean environments.

• Journal of electromagnetic engineering and science
• /
• 제18권1호
• /
• pp.58-62
• /
• 2018

In this study, we propose a software-defined radio-based frequency interference emulator in the space-time domain. This emulator can easily model actual interference environments because of the versatile programming capability of the universal software radio peripheral and LabVIEW. As an example of an interfering network using the contention-based multiple access scheme in the time domain, we emulate a coordinated Wi-Fi network that consists of one access point and two Wi-Fi nodes. Results show that our emulator can successfully model multiple interfering signals in the Wi-Fi network and easily adjust various space-time domain parameters.

• 한국정밀공학회지
• /
• 제15권2호
• /
• pp.146-153
• /
• 1998

NC machines with 4 or 5 axes are capable of various tool approach motions, which makes interference-free and high machinablity machining possible. This paper deals with how to integrate these two advantages (interference-free and high machinability machining) in multi-axes NC machining with a ball-end mill. Feasible tool approach region at a point on a surface is first computed, then among which an approach direction is determined so as to minimize the cutting force required. Tool and spindle volumes are considered in computing the feasible tool approach region, and the computing time is improved by trans-forming surface patches into minimal enclosing spheres. A cutting force prediction model is used for estimating the cutting force. The algorithm is developed so as to be applied to 4- or 5-axes NC machining in common.

• 한국전자파학회논문지
• /
• 제29권1호
• /
• pp.10-19
• /
• 2018

본 논문에서는 고주파 Radio-Frequency Interference (RFI) 측정용 프로브로 널리 쓰이는 Printed Spiral Coil(PSC)의 고주파 등가회로 모델이 제안되었다. 제안된 모델은 고주파 정합성을 확보하기 위하여 PSC의 설계변수에 기반한 분포 모델로 설계되었으며, 제안된 분포 등가회로 모델을 바탕으로 T-Pi 등가변환을 이용한 PSC의 고주파 해석적 모델 역시 새로이 제안되었다. 제안된 모델의 실제 고주파 RFI 측정 시 효용성을 확인하기 위하여, 임의의 RFI 노이즈 원으로 설계된 마이크로스트립 라인과 PSC 사이의 전달함수를 제안된 모델과 상호 인덕턴스를 결합하여 추출하였다. 제안된 PSC 모델의 자기 임피던스(self-impedance)와 전달함수는 3-dimensional field solver를 이용한 시뮬레이션 및 실 측정으로 검증되었으며, 6 GHz까지 높은 정합성을 보이는 것이 확인되었다. 제안된 PSC의 자기 임피던스 및 전달함수 모델은 GHz 영역의 고주파 통신대역에서의 RFI 측정용 프로브 설계 및 노이즈 간섭 예측에 활용될 수 있다.

• 한국전자파학회논문지
• /
• 제13권7호
• /
• pp.693-701
• /
• 2002

본 논문에서는 간섭제거기(IC: Interference Cancellation or MUD; Multi-User Detector)를 적용한 WCDMA (Wideband Code Division Multiple Access)방식 의 비동기식 IMT(International Mobile Telecommunication)-2000 시스템에서 역방향 링크의 통화권에 대해 분석하였다. 간섭제거기는 역방향 링크의 통화권 확장을 위해 사용되었으며, 시스템 용량과 통화권의 관계를 대수-정규(log-normal)분포의 전파음영 환경에서 경로손실과 전파음영감쇠를 포함하는 전파손실모델 및 간섭의 영향을 고려하였다. 간섭량은 정량 산출이 어렵기 때문에 본 논문에서는 전체 셀의 간섭 대 내부 셀의 간섭비를 이용하였다. 간섭제거기를 사용하여 다중접속간섭(MAI; Multiple Access Interference)의 제거를 통한 시스템의 성능향상을 비교 분석하기 위해 간섭제거기 효율($\beta$)을 이용하였다. 모의실험은 실제 무선전파환경에 근접한 전파예측 모델인 Hata모델을 이용하여 반송파 주파수 800 MHz와 1900 MHz에서 음성서비스와 데이터서비스의 전송속도(bit rate)에 따라 동일한 대역폭(3.84 MHz)에서의 통화권을 분석하고, 내부셀에 간섭제거기를 적용하여, 용량 및 통화권의 성능을 비교 분석하여 실제 시스템에서의 성능을 예측하였다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 추계학술대회 논문집
• /
• pp.18-23
• /
• 2003

The Objective of this research is to find the optimal design of the Noise Reduction Interference Model (NRIM) which is recently invented. Without optimization, the NRIM has been successful to reduce the urban noise induced by trains and automobiles. While it is used with the barrier on the road, there is a strong desire to reduce noise more. Yet the only remedy is to make the barrier higher with cost increase. Therefore, the optimal design is necessary to reduce noise while maintaining the barrier height. More efficient Genetic Algorithm is used to find the optimal shape of NRIM with the reduction of noise lever up to 15 dB. also BEM is used to verify the optimal design results.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
• /
• pp.233-236
• /
• 1999

To investigate the effect of interference current between pairs and quasi-particles, we have calculated the change I-V characteristic curve of resistively and capacitively shunted Josephson junction with external microwave by simulation of modified Stewart-McCumber model. Such rf-induced constant-voltage steps and the immunity against to noise were found to be changed in the presence of interference current.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.647-652
• /
• 2001

A noise reduction of noise barrier for high speed train was measured by using scale down model test. A selected types of noise barriers were simple vertical barrier, interference type barrier with plate, interference type barrier with cylindrical pipes. On experiment, in order to make similar present test lane condition, reduced train model and multiple noise sources were considered. As a result. interference type noise barrier with cylindrical pipes is most effective than other barriers. A present height of noise barrier which is established in a test lane is not high enough for reducing patograph noise.