• Journal of Communications and Networks
• /
• v.15 no.3
• /
• pp.312-320
• /
• 2013

Home evolved Node-B (HeNB), also called a femtocell or a femto base station, is introduced to provide high data rate to indoor users. However, two main problems arise in femtocell networks: (1) Small coverage area of HeNB, which results in limited cell-splitting gain and ping-pong handover (HO) problems and (2) high inter-femtocell interference because HeNBs may be densely deployed in a small region. In this study, an efficient cooperation mechanism called an HeNB-aided virtual-HO (HaVHO) scheme is proposed to expand the coverage area of femtocells and to reduce inter-femtocell interference. The cooperation among neighbor HeNBs is exploited in HaVHO by enabling an HeNB to relay the data of its neighbor HeNB without an HO. The HaVHO procedure is compatible with the existing long term evolution specification, and the information exchange overhead in HaVHO is relatively low. To estimate the signal to interference plus noise ratio improvement, the area average channel state metric is proposed, and the amount of user throughput enhancement by HaVHO is derived. System-level simulation shows that HaVHO has a better performance than the other four schemes, such as lesser radio link failure, lesser ping-pong handover, lesser short-stay handover, and higher user throughput.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.5
• /
• pp.55-62
• /
• 2019

In this paper, we consider K-user multiple-input multiple-output (MIMO) interference channel and present a transceiver design for simultaneous wireless information and power transfer (SWIPT) systems. In addition, we consider a SWIPT system where an information decoding receiver and an energy harvesting receiver are co-located at the same receiver. In the proposed scheme, signal-to-leakage plus noise ratio (SLNR) is used as a cost function and a transceiver is designed to satisfy the threshold of the harvested energy. More specifically, transmitter precoding vector, receiver filter vector, and power spitting factor are simultaneously designed to maximize SLNR with a constraint on the harvested energy. Through computer simulation, we compare the signal-to-interference plus noise ratio (SINR) performance of the proposed and conventional schemes. When a special condition among the number of transmit antennas, receive antennas, and users is satisfied, the proposed scheme showed better SINR performance than the conventional scheme at low signal-to-noise ratio (SNR) range. Also, when the condition is not satisfied, the proposed scheme showed better performance than the conventional scheme at all SNR range.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.8
• /
• pp.1074-1081
• /
• 2021

It has recently been noticed that the headway of unlicensed wireless technology is necessary as user's demands of wireless tech increase and the development of high-speed data service by using low-power short-range wireless network is needed. Hence, it is inevitable to study sharing and coexistence for broadband spectrum of diverse unlicensed application with wide bandwidth. In this paper, an interference examination between unlicensed WiFi (Wireless Fidelity) in the 6GHz and OB (Outside Broadcasting) system which is an incumbent service in the same frequency band was conducted and it suggests separation distance for the coexistence. Thus, MCL (Minimum Coupling Loss) and MC (Monte Carlo) methods were used to set up interference scenarios for the interference analysis and compute the separation distance between two systems according to the same frequency band and frequency separation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.11
• /
• pp.2411-2417
• /
• 2012

Globally, the emergence of smart phones vitalized the ecosystem of mobile data service industry. Consequentially, mobile data traffic has been explosively growing and the speed of growth will be more steep. New spectrum will be required in order to properly accommodate the explosively growing mobile data traffic. However, it will be difficult to acquire a sufficient guard band between different frequency bands because the range of frequency which is suitable for wireless communications is limited. Thus, the performance degradation caused by inter-band interference will be one of challenging problems in the next generation mobile communication systems. In this paper, we analyze the performance degradation caused by inter-band interference by computer simulations in various environments. Our results show that the impact of the inter-band interference is more critical when own signal is poor or its own interference from neighboring cells is low.

• Journal of Digital Contents Society
• /
• v.8 no.4
• /
• pp.491-497
• /
• 2007

RPersonal area networking technology is becoming increasingly important in enabling useful wireless home applications. For example, Bluetooth and IEEE 802.11b standards are the most commonly deployed technologies for wireless home applications. However, because both standards share the same unlicensed ISM (Industrial, Scientific, Medical) radio spectrum, severe interference is inevitable and performance can be impaired significantly when heterogeneous devices using the two technologies come into close proximity. In this paper, we research Gaussian FSK Bluetooth system, which is an open specification technology for short-range wireless connectivity between electronic devices. In this paper, we analyzes the effects of co-channel interference on the performance of a Gaussian FSK Bluetooth system. Performance criteria used in the study are the signal to interference power ratio (SIR), interference index, and the bit error rate (BER) in the wireless channel. The effect of co-channel interference from various sources on the performance of a Gaussian FSK Bluetooth system is analyzed using an IGA(Impulsive Gaussian Approximation) method, and these quantities are plotted against Eb/No, $\rho$ and SIR for various channel conditions in figures.

• Journal of Digital Contents Society
• /
• v.7 no.2
• /
• pp.103-108
• /
• 2006

Short-range wireless communication and networking technologies are becoming increasingly important in enabling useful mobile applications. for example, ZigBee technology is expected to provide low cost and low power connectivity for equipment that needs battery life as long as several months to several years. In addition, ZigBee can be implemented in mesh networks larger than is possible with Bluetooth. The main features of this ZigBee standard are network flexibility, low cost, very low power consumption, and low data rate in an adhoc self-organizing network among fixed, portable and moving devices. Home network/Home automation is one of the key market areas for Zigbee, with an example of a simple network This paper investigates the effect of short range wireless channel on the performance of Zigbee system and DSSS-BPSK signal transmission in AWGN, interference and Rician fading environments. And we investigate performance degradation due to interference and fading effects in short range wireless channel. In particular, the impacts of the fading and interference level on the bit error probability is shown in BER performance figures.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.2
• /
• pp.214-221
• /
• 2001

This paper describes the design of 3-component force/moment sensor with the force and moment ratio of wide range. It can measure the x-direction force Fx, y-direction force Fy and z-direction moment Mz simultaneously. In order to accurately measure forces and moment using 3-component force/moment sensor, it should get suitable force and moment ratio(the ratio of force Fx=200 N and moment Mz=20 Nm is ten to one), and small interference error. In this paper, in order to design the 3-component force/moment sensor with the force and moment ratio of wide range, the procedures are performed as follow : 1) the derivation of the equations to predict the bending strains on the surfaces of the plate-beams under the force or the moments, 2) the determination of the size of the sensing elements of the force/moment sensor by using the derived equations, 3) the Finite Element Method(FEM) analysis and the characteristic test for confirming the strains from the theory analysis, 4) the selection of the attachment locations of the strain gages of each sensor, 5) the analysis of the rated strain and the interference error at the attachment location of strain gages. It reveals that the rated strains calculated from the derived equations make a good agreement with the results from the Finite Element Method analysis and the characteristic test.

• Journal of Advanced Marine Engineering and Technology
• /
• v.27 no.6
• /
• pp.736-744
• /
• 2003

This study is conducted to investigate aerodynamic forces and wake structures about the pressure interference of a circular cylinder with slits. An experimental investigation of a circular cylinder with slits is carried out in uniform flow in the range of Reynolds number from 8,000 to 32,000 using X-type hot wire. Flow visualization is executed by smoke-wire method to understand the mechanism of these vortex formation process. Inspection in the wake at X/D=5.5 of the cylinder with the slits suggested that a strong vortex-shedding pattern for these cylinders is revealed compare with a circular cylinder without slits. It is found that the rolling up position of shear layer of the cylinder with slits is shorten compare with a circular cylinder without slits.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1778-1783
• /
• 2000

When visual intrusion is an important factor, it is desirable to find alternative methods of improving the insertion loss of a noise barrier without increasing the height. Therefore, the primary object of the work attenuates the noise due to transport vehicle by small interference device installed at noise barrier edge. In this paper the performance of noise barriers with attached interference device, in terms of shape, absorptive material and split panel, are examined using the boundary element approach. Also, the scale models are moanted in an anechoic chamber and the frequency of the sound sources are appropriately scaled to simulate full scale site conditions. Lastly, experimental measurements of the designs are executed for a range of frequencies and receiver positions, and are compared with the results of numerical modeling.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.9
• /
• pp.3276-3292
• /
• 2015

Relay-assisted D2D communication extends the communication range of the D2D pairs and helps users to form D2D pairs effectively. However, due to the introduction of the multi-hop relaying, the D2D communication has to occupy extra transmission time, which may decrease the efficiency of the communication system. In this paper, we propose a scheme to make node receive D2D signal and BS signal at overlapping time to improve the spectrum efficiency according to ZigZag decoding and successive-interference-cancellation (SIC). In this way, more data can be delivered during the same duration, thus the network throughput can be further improved. Numerical results verify the performance improvement of the proposed scheme when compared with a baseline scheme. Moreover, we expand the proposed scheme from one-hop relay scenario to multi-hop relay scenario.