• Composites Research
• /
• 제17권5호
• /
• pp.61-67
• /
• 2004

본 연구에서는 전자파 차폐용 도전성 개스킷 소재로 활용할 수 있는 은입자 충전 실리콘 복합 페이스트에 대한 전기전도성 및 응력-변형율 특성을 분석하였다. 불규칙한 구형의 은(Ag)입자와 상온습기경화형(RTV) 실리콘수지를 도입하여 복합 페이스트의 퍼콜레이션 농도(임계 농도)를 전기전도도 측정 결과로부터 결정하였다. 약 28%의 은입자 함량에서 퍼콜레이션 현상이 발생하였으며, 이 농도에서 급격한 감소를 보이는 은입자/실리콘 복합 페이스트의 체적 비저항, 인장강도 및 연신률의 특성 변화에 관하여 고찰하였다. 또한, 커플링제의 선택적 방법을 통해 퍼콜레이션 농도 이상으로 충전된 복합 페이스트의 응력-변형율 특성을 효과적으로 개선할 수 있음을 제시하여 주었다.

• 센서학회지
• /
• 제15권1호
• /
• pp.40-46
• /
• 2006

This paper presents a novel fiber optic accelerometer system for monitoring vibration of large-size structures. The system is composed of one (or multiple) sensor head, a light control unit and a signal processing unit. The sensing mechanism of the sensor head is based on a novel integration of the moire fringe phenomenon with fiber optics to achieve a robust performance in addition to its immunity to EM interference, easy cabling, and low cost. In this paper, a prototype of the fiber optic accelerometer system has been developed successfully. A low-cost light control unit has been developed to drive the system's optic and electronic components. A unique algorithm has also been developed to derive the sensor's acceleration from the raw signals of the light control unit; it is implemented via a separate signal processing unit. Finally, the shaking table tests successfully demonstrate the performance and the potential of the moire fringe fiber optic sensor system to monitor the health of civil infrastructures.

• Animal cells and systems
• /
• 제7권3호
• /
• pp.197-205
• /
• 2003

White snakeroot (Ageratina altissima (L.) R. King & H. Robinson) as an invasive alien plant appeared more abundantly at lower elevations where frequent artificial interferences prevailed than at higher elevations where such impacts were less. They appeared abundantly in introduced forests such as black locust plantation but they did not appear or were rare in natural forests such as oak forest. But an exceptional phenomenon where white snakeroot did not appear was found in a Korean pine stand with dense cover afforested recently. Appearance status of white snakeroot in each section of trampling path depended on breadth of the path and relative light intensity. Growth of white snakeroot measured as the number of ramet per genet, height, and biomass was better near the trampling path and was reduced toward the forest interior. The growth was proportionate to the relative light intensity measured according to distance from the trampling path. Such results support the fact generally known in relation invasion and expansion of the invasive alien plants. From this viewpoint, we suggest a management plan that applies ecological restoration principles to address ecosystems infected with white snakeroot by restoring the integral feature of the degraded nature and more thoroughly conserving the remaining nature.

• 한국자기학회지
• /
• 제22권3호
• /
• pp.91-96
• /
• 2012

복잡한 전극 구조를 갖는 TFT-LCD 패널의 픽셀 사이의 간섭효과를 고려하여 액정에서의 공간 전기장 분포를 정밀하게 예측할 수 있는 멀티 픽셀 기반의 3차원 유한요소 수치해석 모델을 구축하였다. 이를 토대로 패널 내 다양한 전극 불량 조건에 대한 액정에서의 공간 전기장 분포 특성을 정상 상태와 비교 분석 하였다. 이러한 수치모사 결과와 기존 광학적 패널 검사장비의 불량검출 결과를 간접 비교함으로써 제안한 3차원 유한요소 수치모델의 타당성을 검증하였다.

• 디지털산업정보학회논문지
• /
• 제9권1호
• /
• pp.151-163
• /
• 2013

Recently the attention on digital hologram that is regarded as to be the final goal of the 3-dimensional video technology has been increased. Digital hologram is calculated by modeling the interference phenomenon between an object wave and a reference wave. The modeling for digital holograms is called by computer generated hologram (CGH) Generally, CGH requires a very large amount of calculation. So if holograms are generated in real time, high-speed method should be needed. In this paper, we analyzed CGH equation, optimized it for mapping general purpose graphic processing unit (GPGPU), and proposed a optimized CGH calculation technique for GPGPU by resource allocation and various experiments which include block size changing, memory selection, and hologram tiling. The implemented results showed that a digital hologram that has $1,024{\times}1,024$ resolution can be generated during approximately 24ms, using 1K point clouds. In the experiment, we used two GTX 580 GPGPU of nVidia Inc.

• 디지털산업정보학회논문지
• /
• 제15권4호
• /
• pp.9-17
• /
• 2019

Sun power generation systems which use large capacity centralized inverters have loss of power generation due to cloud and building shadows, pollution, cell deterioration, etc. To minimize loss of power generation, decentralized solar power systems using multiple micro-inverters are being proposed as an alternative. A distributed solar power system consisting of a system-connected system uses power line communication to collect data from the micro-inverters. Power line communication has the advantage of using power lines without separate lines for data transmission, but in distributed solar power generation systems that use a large number of micro-inverters, the bit error rate is less reliable due to the phenomenon caused by limited transmission power, high load interference and noise, variable signal attenuation, and impedance characteristics. So we proposed wireless intelligent controller for micro-inverter that is used to build distributed solar power systems. and we design and implement that. Further, the proposed wireless intelligent controller for micro-inverter was used to establish a small-volume solar power plant to check its function and operation.

• 한국해양공학회지
• /
• 제20권2호
• /
• pp.36-40
• /
• 2006

As large waves enter a harbor, during their propagation, the motions a floating body are large and if may even be damaged by waves. This phenomenon may be caused by harbor resonance, resulting from large motion at low wave frequency, which is close to the natural frequency of a vessel. In order to calculate the motion of a floating body in a harbor, it is necessary to use the wave forces containing the body-harbor interference. The simulation program to predict the motions of a floating body by waves in a harbor is developed, and this program is based on the method of velocity potential contiuation method proposed by Ijima and Yoshida The calculated results are shown by the variation of wave frequency, wave angle, and the position of a floating body.

• 전기학회논문지
• /
• 제65권5호
• /
• pp.711-717
• /
• 2016

Recently, fuel cell generation system with high energy efficiency and low CO2 emission is energetically interconnected with distribution power system. Especially, MCFC(molten carbonate fuel cell) operating at high temperature conditions is commercialized and installed as a form of large scale power generation system. However, it is reported that power system disturbances such as harmonic distortion, surge phenomenon, unbalance current, EMI(Electromagnetic Interference), EMC (Electromagnetic Compatibility) and so on, have caused several problems including malfunction of protection device and damage of control devices in the large scale FCGS(Fuel Cell Generation System). Under these circumstances, this paper proposes countermeasure algorithms to prevent power system disturbances based on the modelling of PSCAD/EMTDC and P-SIM software. From the simulation results, it is confirmed that proposed algorithms are useful method for the stable operation of a large scale FCGS.

• 한국기계가공학회지
• /
• 제16권5호
• /
• pp.47-54
• /
• 2017

This study examines the implementation of a kinematic machining tool to evaluate the interference and collision phenomenon of 5-axis machining of wing ribs from airplanes, particularly for a large-size model airplane. We develop a machine simulation model of a parallel kinematic machining tool that can operate in a virtual space, which is equivalent to the authentic conditions in the field. The investigation of the simulation function elements indicates the necessity to generate the 6-axis machining, which attaches an angle head to the main axis of the machine. Using an NC program for the wing ribs, we attempt to verify the correspondence and conformity between the machine simulation model and the actual equipment.

• 한국광학회지
• /
• 제10권4호
• /
• pp.328-334
• /
• 1999

Acrylamide를 홑몸체로 하는 포토폴리머에서 두광파혼합(two-wave energy coupling)실험을 하였다. 외부의 전기장이나 비선형 매질의 이동, 또는 두 입사파 중 광파의 위상이동 없이 자체회절 진동(self-diffraction oscillations)로 측정되었다. 이러한 현상을 설명하기 위하여 위상격자와 흡수격자가 혼합된 격자(mixed grating)와 두 광파의 에너지 결합동안에 형성되는 강도 간섭무늬에 대해 공간 위상 이동(nonlocal response)이 있는 경우를 가정하여, 수정된 Kogelnik의 결합파동 방정식을 유도하였다. 측정된 자체회절 진동을 통하여 포토폴리머의 위상격자(phase grating)는 강도격자(intensity grating)에 대해$\pm$50。의 위상 이동이 있음을 알았다.