• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.939-942
• /
• 2008

Moir$\acute{e}$s are a natural interference phenomenon which occurs whenever a transparent regular pattern plate is overlapped on another regular pattern plate. In the contact-type 3 dimensional imaging systems, the moires are inherent because an image display panel is seen through a viewing zone forming optical plate. The mathematical analysis of moires in the systems shows that they can be minimized by the proper selection of overlapping angles between them. The angle is different for pixels with different aspect ratios.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.1
• /
• pp.108-113
• /
• 2011

There are a lot of PDP TV for a plasma discharge pulse voltage generated by the use of electromagnetic waves. EMI mesh film is near Infrared ray caused by malfunction of the remote control intended to prevent this phenomenon. In this study, the formation of fine pattern by making the mold is imprinted on the film sheet. EMI mesh film has been granted by filling in the conductive material region imprinted with electroforming in the manufacture of resistance. The fine patterns fabricated with electroforming facility thickness of homogenization process technology were established to optimize the working conditions.

• Journal of ILASS-Korea
• /
• v.25 no.2
• /
• pp.51-59
• /
• 2020

The purpose of this study is to propose and compare methods for measuring individual spray cone angles using spray cross-section images. In direct injection gasoline engines, it was believed that the distribution of air-fuel mixture in the combustion chamber directly affected combustion performance and emission formation. However, since gasoline direct injection (GDI) injectors have a small injection angle, interference between individual spray plumes occurs. Therefore, GDI injectors have only measured the spray angle of the entire spray. To overcome these limitations, three methods of indirectly measuring the spray cone angles of individual spray plume were presented and compared by forming sheet beams using Nd:YAG laser and acquiring spray cross-section images. Each method currently has advantages and disadvantages, and research to apply the method suitable for various GDI injectors needs to be continued.

• The Korean Journal of Ecology
• /
• v.21 no.6
• /
• pp.791-797
• /
• 1998

An attempt to clarify the landscape structure of urban areas was carried out on Mt. Hwangryung located in the center of Pusan, southern Korea. By means of aerial photographs and field survey, a vegetation map including land-use pattern was made. Landscape structure was described by analyzing the vegetation map. Landscape element types were classified into secondary forest, introduced plantation, and other elements including urbanized area. almus firma and Pinus thunbergii communities, introduced plantation elements, formed matrix and some secondary forest elements and the other artificial plantations of small scale tended to distribute as small patches in such matrix. The number of patches per unit area in secondary forest elements was more than that in introduced plantation element. The result on patech size was vice versa. As the results of landscape ecological analyses, it was estimated that differentiation of patches recognized in community level would be related to artificial interference and those in sub-communities levels to natural process such as progression of succession. On the other hand, restoration plans in viewpoints of restoration and landscape ecology were suggested to improve ecological quality of Mt. hwangryung.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.3
• /
• pp.380-386
• /
• 2013

This paper represents an adaptive beamforming technique to suppress interference or jamming signals in wideband. In order to maintain low side lobe level(SLL) at an antenna element level, Taylor-weighting was used. Also, to make a nulling beam pattern toward jammer's directions in wideband, we used the modified Loaded Sample Matrix Inversion(LSMI) algorithm and Tapped Delay Line(TDL). To verify the proposed algorithm, we applied it to a rectangular array antenna. Finally, the results show beam pattern with low SLL and jammers suppression.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1761-1766
• /
• 2004

Recently, Plastic optical products are widely used. Injection molding process has advantages of low cost and high productivity. However, it remains a residual birefringence and residual stress by difference cooling. The present study focused on measuring birefringence in optical plastic parts using interference color pattern. The main idea of an analysis comes from chromatic aberration which is caused by difference light wavelengths. As a result, a complete system measuring the high order 2-D birefringence pattern was built. Further investigation is under way to improve the accuracy of birefringence measurement system by diode laser.

• Journal of electromagnetic engineering and science
• /
• v.16 no.2
• /
• pp.74-79
• /
• 2016

This paper proposes an optimum array configuration to improve null steering time for mobile controlled reception pattern antenna (CRPA) systems. The proposed array consists of a single reference element at the center and nine auxiliary elements arranged in a circular array. The array radius and the vertical positions of the center element are optimized using a genetic algorithm in conjunction with a constrained least-mean-square algorithm. The results demonstrate that the proposed array is suitable for mobile CRPA systems without significant side nulls in satellite directions.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.53-54
• /
• 2007

Charged particle type display using particles which have opposite charge and color is based on effect of reversible optical property due to electric field. we designed mask pattern for fabrication of the charged particle type display based on glass substrate and investigated cell gap dependent of driving voltage and selectively driving method. the panel driven by our selectively driving method, we could obtain image which had vary little crosstalk caused by electrical interference and conform the last image maintained by memory effect without additional voltage.

• Journal of Convergence for Information Technology
• /
• v.10 no.11
• /
• pp.1-8
• /
• 2020

As power consumption is maximized, research on augmented reality-based monitoring systems for on-site facility managers to maintain and repair power facilities is being actively conducted as individual power brokerages and power production facilities increase. However, in the case of existing augmented reality-based monitoring systems, it is difficult to accurately detect patterns due to problems such as external environment, facility complexity, and interference with the lighting environment, and it is not possible to match various sensing information and service information for power facilities to one pattern. there is a problem. For this reason, since sensor information is matched using a single image pattern for each sensor of a power facility, a plurality of image patterns are required to augment and provide all information. In this paper, we propose a single image pattern arrangement method that matches and provides a plurality of information through an array combination of feature patterns in a single image composed of a plurality of feature patterns.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.1
• /
• pp.29-35
• /
• 2006

The third generation mobile communications system requiring the reliable multimedia data transmission has provided with the reliable voice, data and video services over the variable propagation environment. However the broadband wireless multiple access technologies cause Inter Symbol Interference(ISI) or Multiple Access Interference(MAI) to degrade the performance of CDMA(Code Division Multiple Access) system. Constant Modulus Algorithm which is frequently used as the adaptive blind equalizers to remove the interfering signal has ill-convergence phenomenon without proper initialization. In this paper, new blind equalization method based on conventional CMA is proposed to improve the channel efficiency, and through computer simulation this is tested over the time varying fading environment of mobile communication system. consequently, new blind equalization method into concatenated Kalman filter with CMA is verified better than conventional CMA through adopting minimum mean square errors and eye-pattern obtained from algorithm are compared.