• Journal of Electrochemical Science and Technology
• /
• 제6권4호
• /
• pp.116-120
• /
• 2015

Lithium diffusivity of fluorine-free and -doped tin-nickel (Sn-Ni) film model electrodes with improved interfacial (solid electrolyte interphase (SEI)) stability has been determined, utilizing variable rate cyclic voltammetry (CV). The method for interfacial stabilization comprises fluorine-doping on the electrode together with the use of electrolyte including fluorinated ethylene carbonate (FEC) solvent and trimethyl phosphite additive. It is found that lithium diffusivity of Sn is largely dependent on the fluorine-doping on the Sn-Ni electrode and interfacial stability. Lithium diffusivity of fluorine-doped electrode is one order higher than that of fluorine-free electrode, which is ascribed to the enhanced electrical conductivity and interfacial stabilization effect.

• Elastomers and Composites
• /
• 제52권4호
• /
• pp.257-265
• /
• 2017

In this work, CR (Chloroprene Rubber) was emulsified by phase-inversion emulsification with nonionic surfactants (NP-1025, LE-1017, and OP-1019) and an anionic surfactant (SDBS; sodium dodecylbenzenesulfonate), and its stabilization was investigated through a study of its adsorption characteristics, zeta potential, and flow behavior. As the amount of the mixed surfactant increased, the droplet size decreased, resulting in the increase of viscosity. In particular, a CR emulsion with a lower absorbance in the UV spectrum exhibited the highest zeta potential. The results of this experiment showed that the CR emulsion prepared using (LE-1017) and SDBS was the most stable. In this study, calcium hydroxide and aluminum hydroxide were added to enhance the mechanical properties of the CR emulsion, and the relationship between tensile strength, tear strength and surface free energy were investigated. The tensile and tear strengths of the CR emulsion incresed as the amount of calcium hydroxide and aluminum hydroxide increased. The highest tensile and tear strengths and surface free energy were observed for additions of 1.0% calcium hydroxide and 0.80% aluminum hydroxide, respectively. It was concluded that the interfacial bonding strength was improved by the even dispersion of calcium hydroxide and aluminum hydroxide in the CR emulsion.

• 전자공학회논문지A
• /
• 제32A권3호
• /
• pp.134-142
• /
• 1995

We discovered that each distinct shape of the roof-shaped peaks of (111) facets, which are generated on (110) cross-section of the directly bonded (100) silicon wafer pairs after KOH etching, can be mapped to one of three conditions of the interfacial oxide existing at the bonding interface as follows. That is, thick solid line can be mapped to stabilization, thin solid line to disintegration, and thin broken line to spheroidization. also we confirmed that most of the interfacial oxides of a well-aligned wafer pairs were disintegrated and spheroidized through high-temperature annealing process above 900$^{\circ}$C while the oxide was stabilized persistently when two wafers are bonded rotationally around their common axis perpendicular to the wafer planes.

• 전기화학회지
• /
• 제15권3호
• /
• pp.154-159
• /
• 2012

Si계 음극소재는 리튬 삽입-탈착 중 일어나는 큰 구조적 부피변화와 입도변화로 인해 빠른 성능 퇴화가 일어나는 단점이 있다. 산화물 SiO 음극소재는 리튬과의 반응 중 비활성상인 $Li_2O$ 및 lithium silicate가 형성되어 Si의 부피변화를 완화시키는 버퍼 역할을 하므로 용량은 Si보다 적으나 개선된 용량 유지 특성을 보이는 것으로 알려져 있다. 본 연구에서는 Si의 부피변화 완화를 위하여 저가의 $SiO_2$와 입자간 전기전도성을 향상시키는 흑연을 구조안정화 기재로서 사용하여 Si-$SiO_2$-흑연 복합재 음극을 제작하였다. 구조안정화 뿐만 아니라 silane계 전해액 첨가제를 이용하여 Si-$SiO_2$-흑연 복합재 음극과 전해액간 계면을 안정화시킴으로써 용량 유지 특성이 개선되는 효과에 대해 보고하고자 한다.

• Journal of Microbiology and Biotechnology
• /
• 제9권1호
• /
• pp.32-38
• /
• 1999

A biosurfactant produced by Tsukamurella sp. 26A was purified by procedures including acid precipitation, ethylacetate extraction, and adsorption chromatography. The purified biosurfactant reduced the surface tension of water from 72 mN/m to 30 mN/m at a concentration of 250 mg/l, whereas the minimum interfacial tension against n-hexadecane was lowered to 1.5 mN/m at a concentration of 40 mg/i. The compound stabilized oil-in-water emulsions with a variety of commercial oils and had strong emulsification and stabilization activities when compared to those of commercial emulsifiers and stabilizers. Surface tension was stable over a broad range of pH (2-12) and temperature ($100^{\circ}C$, 3h). The biosurfactant was identified as glycolipid having a hydrophilic moiety of trehalose.

• 한국세라믹학회지
• /
• 제27권5호
• /
• pp.684-692
• /
• 1990

Ultrafine magnetite powder for the ferromagnetic fluid was prepared by an addition of alkaline solution to the solution containing Fe2+ and Fe3+ ions at 6$0^{\circ}C$. The optimum condition of the magnetite synthesis was delineated by examining such various physico-chemical properties as Fe2+/Fe+3 ratio in the powder, phase characteristics, MHC and $\sigma$max. A new scheme for the steric stabilization of colloidal dispersion was proposed using the concept of the buffer group action for the increased interfacial density of the stabilizing moieties at colloid particle/dispersion medium interface. The proposed concept was successfully applied to the preparation of the kinetically stable kerosinebased ferrofluid using Tween and Span as dispersants. In the dispersion of magnetite particles in a kerosine, Tween(polyoxyethylene sorbitan oleate) acts as a primary stabilizer which provides an anchor group, whereas Span(sorbitan oleate) can be classified as a secondary stabilizer which adsorbs on the surface of magnetite particle through the action of the buffer group. Dispersion studies using various quantities of Tween and Span supported the concept of the buffer group action for increased dispersion characteristics of the kerosine based ferromagnetic fluid.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.89-89
• /
• 2010

The atomic structure of Sb/Si(5 5 12)-$2{\times}1$ surface, deposited at room temperature (RT) and post-annealed, has been identified by scanning tunneling microscopy and the corresponding interface has been studied by synchrotron core-level photoemission spectroscopy. With 0.3-nm Sb deposition at RT and postannealing at $600^{\circ}C$, the surface has been facetted to (225)-$2{\times}1$ and (112)-$1{\times}1$, and its Si 2p has shown that all the Si 2p surface components have disappeared, while the single Sb-Si interfacial component has appeared. Such results indicate that all of surface Si atoms are replaced by Sb atoms and the charge is transferred from Si to passivating Sb-atoms at the top layer. With subsequent postannealing up to $700^{\circ}C$, the surface has been facetted to (113)-$2{\times}2$ and (335)-$4{\times}2$, still having Sb-Si interfacial component and partially re-exposed Si surface components. From the present study, the role of surfactant atom, Sb, as well as the thermal-stabilization of Sb-passivated high-index Si surface will be exposed. Especially, the key role of the Sb/Si(113)-$2{\times}2$, composed of Rebonded-Dimer-Rebonded atom 1D structures, for stabilization will be discussed.

• Elastomers and Composites
• /
• 제54권4호
• /
• pp.335-344
• /
• 2019

In this work, styrene butadiene rubber (SBR) and styrene butadiene styrene (SBS) were used to modify asphalt, resulting in SBR- and SBS-modified asphalt, respectively. The two modified asphalts were emulsified with a nonionic emulsifier (Span 60) and cationic emulsifiers (ID, DDA) and their phase stabilization was investigated via particle size, Zeta potential, and flow behavior analysis. With increasing amount of the mixed emulsifier, the particle size decreased, leading to an increase in viscosity. The shear thinning behaviors and Zeta potential values ranging from 35-65 mV were determined and remained considerably stable. In addition, the adhesion strength and compression strength of the SBR-and SBS-modified asphalt emulsion were evaluated via surface free energy examination. The remarkable adhesion and compression strengths were estimated when 5 phr ID and 6 phr DDA were added to the emulsified asphalt modified with SBR and SBS. Therefore ID and DDA, the two cationic surfactants, played significant roles in improving the dispersion and interfacial adhesion strength, resulting in the improved adhesion and compression strength of the emulsified asphalts modified with SBR and SBS.

• 한국산학기술학회논문지
• /
• 제10권8호
• /
• pp.2005-2014
• /
• 2009

PDLC 필름을 제작하는 데는 여러 방법들이 있으나 그중 하나로서 에멀젼 기술에 기반을 둔 NCAP필름 제조방법이 있다. 이러한 에멀젼 기술은 물에 부분적으로 용해될 수 있는 PVA, PVP와 같은 고분자로 NCAP를 제조할 수 있고, 또한 안정제 없이도 안정한 액정 에멀젼을 형성할 수 있다. 본 연구에서는 물에 녹는 것과 물에 녹지 않는 부분을 가지고 있는 분자로 구성된 공중합체에 대하여 에멀젼의 안정성과 계면장력, 표면장력이 공중합체의 구성, 농도, 소수성 체인 등에 의존한다는 것도 연구하였다. Acrylamide-styrene(AA-ST)계 공중합체는 같은 농도조건에서 사용한 다른 공중합체보다 낮은 계면장력을 나타낸다. 낮은 계면장력 때문에 AA-ST 공중합체는 액정분자들과 좋은 친화성을 갖는다. 또한 액정표면에 쉽게 흡수되는 분자들이 액정 에멀젼 시스템을 더 안정화하다는 것과 형태학적 분석을 통한 액정의 안정성도 논의하였다.

• Elastomers and Composites
• /
• 제36권4호
• /
• pp.246-254
• /
• 2001

본 연구에서는 CSM 고무를 유화하기 위하여 계면화학적 성질을 이용한 반전유화법과 계면활성제로서 비이온 및 음이온 계면활성제를 혼합 사용하였다. 단독계면활성제를 사용하였을 때에는 에멀젼의 분리가 발생하였고, 비이온 계면활성제 Span 60과 음이온 계면활성제 SLS를 혼합 사용하는 경우에는 상의 분리가 발생하지 않았다. 그러므로 혼합계면활성제를 사용하여 제조한 에멀젼의 droplet size, 전단속도에 따른 점도 및 전단응력과 같은 유변학적 거동을 통하여 에멀젼의 안정성을 규명하였다. 혼합계면활성제의 양에 따라 droplet size는 감소하였고, 이에 점도는 증가하였으며, 전단속도에 따른 점도 및 전단응력 측정결과 각각 non-Newtonian 흐름인 shear thinning 거동과 항복응력 값을 보였다. 이러한 실험결과인 유변학적 거동으로부터 CSM 고무를 유화하기 위해서는 반전유화법과 혼합계면활성제를 사용함으로써 에멀젼의 안정성을 향상시켰음을 확인할 수 있었다.