• YAKHAK HOEJI
• /
• v.41 no.1
• /
• pp.30-37
• /
• 1997

In order to formulate a controlled release system for oral drug delivery, the microcapsules were prepared in w/o emulsion containing cefaclor as a water-soluble model drug by th e method of interfacial polycondensation. Gelatin wis selected as a suitable polymer for interfacial polycondensation. Gelatin solution containing drug was emulsified in an organic phase under mechanical stirring. After emulsification, terephthaloyl chloride was added as cross linking agent, followed by mechanical stirring, washing and drying. Physical characteristics of microcapsules were investigated by optical microscopy, scanning electron microscopy and particle size analysis. Mean particle sizes of gelatin microcapsules were, in the range, of about 20~50 ${\mu}$m. The microcapsules were in good apperance with spherical shapes before washing, but were destroyed partially after washing and drying, even though some microcapsules were still maintained in their shapes. Contents of cefaclor in the microcapsules were calculated by UV spectrophotometry after 3 days extraction with pH 4 carbonate buffer solution. The effects of cross linking time. pH. concentration of cross-linking agent, and temperature on drug release kinetics have been discussed extensively.

• Textile Coloration and Finishing
• /
• v.2 no.4
• /
• pp.245-250
• /
• 1990

Copolyspiroacetals were synthesized by interfacial polycondensation from 3, 9-bis(4-hydroxyphenyl)-2, 4, 8, 10-tetraoxaspiroundecane(SAB) and 4, 4'-biphenol(BP) with sebacoyl chloride. These copolymers were soluble in polar solvent such as phenol/tetrachloroethane and sulfuric acid, and exibited good thermal stability. But they did not exhibit thermotropic mesophases. The structures of spiroacetal moiety were observed by computer-aided-modeling that had two types of conformational isomers and not linear and/or not planar conformations.

• Journal of Biomedical Engineering Research
• /
• v.8 no.2
• /
• pp.135-144
• /
• 1987

Polyamide microcapsules were designed for a sustained drug release. As a model, riboflavin was e no apsulated in polyamide microcapsules. Polyamide microcapsules were prepared from thiamines and acid bichlorides by the interfacial polycondensation reaction. The diamines used in ttlis works were ethylenediamine and 1, 6-hexamethylenediamine. Sebacoylchloride and teruphthaloylchloride were employed as acid bichlorides. The following parameters were studied; the release of several kinds of polyamide microcapsules , the various concentrations of diamines and acid dichlorides ; the various concentrations of surfactants : the various pH range of sink solution during the dissolution test. The release amount of riboflavin from aromatic polyamide micrcapsule was higher than that of aliphatic polyamide microcapsule The release rate of riboflavin from the polyamide microcapsule was decreased with increase of concentration of thiamines, arid dichlorides and surfactants which is used for preparing polyamide microcapsule. Release riboflavin from polyamide microcapsule was lower at pH 7 than pH 2 in sink-solution for dissolution test.

• Journal of the Korean Applied Science and Technology
• /
• v.12 no.2
• /
• pp.59-64
• /
• 1995

Two aromatic polysulfones, poly(PhC-co-SDA)-2 and poly(TPhC-co-SDA)-2, were synthesized by interfacial polycondensation of phthaoyl chloride(PhC) and terephthaloyl chloride(TPhC) with P, P'-sulfonyldianiline(SDA), respectively. The properties of the aromatic polysulfones synthesized were as follows : inherent viscosity, $0.32{\sim}0.35dL/g$:glass transition temperature, $220{\sim}240^{\circ}C$:tensile strength, $308{\sim}336Kg/cm^2$:and 5% weight loss temperature by TGA thermogram in the air, $500{\sim}530^{\circ}C$. As the result, thermal properties of the synthesized copolymers proved to be excellent.

• Journal of the Korean Chemical Society
• /
• v.23 no.4
• /
• pp.259-266
• /
• 1979

Linear polyethers were prepared by the reaction of diphenoxide anions from 2,2-bis (4-hydroxyphenyl) propane, bis (4-hydroxylphenyl) sulfide, and bis (khydroxyphenyl) sulfone with 1,6-dibromohexane in aqueous/nitrobenzene heterogeneous phases. Tetrabutylammonium bromide was employed as a phase transfer catalyst. The polymerizations were dependent both on stirring speed and catalyst level, but only up to certain maximum values. Distribution studies demonstrated transference of diphenoxide anions from aqueous phase into nitrobenzene in the presence of the catalyst. Some of polymers were characterized with respect to their intrinsic viscosities (0.09-O.16), number average molecular weight (2400-4800)) and thermal properties. The use of a new terminology, 'phase transfer polymerization?, is proposed to differentiate this type of polymerizations from interfacial polycondensations.

• Fibers and Polymers
• /
• v.7 no.1
• /
• pp.12-19
• /
• 2006

For thermal adaptable fabrics, the polyurethane-urea microcapsules containing phase-change materials (PCMs: hexadecane, octadecane and eicosane) were successfully synthesized by interfacial polycondensation using 2,4-toluene diisocyanate (TDI)/poly(ethylene glycol) (PEG400)/ethylene diamine (EDA) as shell monomers and nonionic surfactant NP-12 in an emulsion system under stirring rates of $3,000{\sim}13,000$ rpm. The mean particle size of microcapsule decreased significantly with increasing the stirring rate up to 11,000 rpm, and then leveled off. The mean particle size increased with increasing the content and molecular weight (eicosane > octadecane > hexadecane) of PCMs at the same stirring rate. The mean particle sizes of microcapsules were found to decrease with increasing the NP-12 content up to 1.5 wt%, and thereafter increased a little. It was found that the melting temperature ($T_m$) and crystallization temperature ($T_c$) of three kinds of encapsulated PCMs and their enthalpy changes (${\Delta}H_m,{\Delta}H_c$) increased with increasing PCM contents. The encapsulation efficiencies (Ee) of hexadecane microcapsule linearly increased with increasing the content of hexadecane. It was found that the stable microcapsule containing 50 wt% of hexadecane could be obtained in this study. However, Ee of octadecane and eicosane microcapsules increased with increasing PCM's contents up to 40 wt%, and then decreased a little. By considering the encapsulation efficiency, it was found that the maximum/optimum contents of octadecane and eicosane microcapsules were about 40 wt%. By the dynamic thermal performance test, it was found that the maximum buffering levels of Nylon fabrics coated with hexadecane, octadecane, and eicosane microcapsules were about $-2.4/+2.9^{\circ}C,\;-3.6/+3.6^{\circ}C\;and\;-4.0/+4.7^{\circ}C$, respectively.

• Applied Chemistry for Engineering
• /
• v.8 no.3
• /
• pp.454-462
• /
• 1997

Thermotropic block copolyester(TLCP-b-PBN) based on poly(tetramethylene 2,6-(naphthaloyldioxy)dibenzoates)(TLCP) and poly(butylene 2,6-naphthalate)(PBN) was synthesized by solution polycondensation and melt-blended with poly(ethylene 2,6-naphthalate)(PEN) for in-situ composites. The TLCP domains showed nematic behavior in melt. The composition of block copolymer was determined from $^1H-NMR$ spectroscopy. The DSC thermogram of block copolymer revealed the presence of two major melting transitions, corresponding to the separete melting of PBN and TLCP domains. The glass transition temperature(Tg) of the PEN in the blends decreased with increasing the content of TLCP-b-PBN and the TLCP-b-PBN acted as a nucleating agent for the matrix polymers. In the 20% TLCP-b-PBN blend, well oriented TLCP fibriles were observed at temperature above the melting point of the PEN by optical microscopy. By scanning electron micrographs of cryogenically fractured surfaces of extruded blends, the TLCp domains were found to be finely and uniformely dispersed in 0.15 to $0.2{\mu}m$ size. Interfacial adhesion between the TLCP and matrix polymer was seemed to be good. Under certain condition TLCP formed a fiver structure in the PEN matrix, with thin oriented TLCP fibril in the skin region and spherical TLCP domains in the core.

• Elastomers and Composites
• /
• v.39 no.3
• /
• pp.217-227
• /
• 2004

A new thermotropic liquid crystalline polymer(TLCP) containing a triad aromatic ester type mesogenic unit and butylene terephthalate unit(BT) in the main chain was synthesized by polycondensation reaction. The TLCP synthesized showed nematic mesophasic behavior and its transition temperature from solid to mesophase was $260^{\circ}C$. The TLCP/PBT blends were prepared by in-situ polymerization in PBT solution and characterized by differential scanning calorimeter(DSC), thermogavimetric analyzer(TGA), scanning electron microscope(SEM), x-ray diffractometer(XRD), and dynamic mechanical thermal analyze, (DMTA). The blends showed well dispersed TLCP phases with domain sizes $0.05{\sim}0.2{\mu}m$ in the PBT matrix. As the increasing TLCP content from 5 to 20 wt%, ${\Delta}Hm$ values of pure PBT in the blend were increased because TLCP acts as a nucleating agent in the PBT matrix. The mechanical properties of the blends depended on the TLCP contents because the TLCP acted effectively as a reinforcing material in the PBT matrix. The blends showed good interfacial adhesion between the TLCP phase and PBT matrix.The blends prepared by in-situ polymerization showed higher mechanical properties and well dispersed TLCP domains than those of the blends prepared by melt blending.

• Elastomers and Composites
• /
• v.37 no.4
• /
• pp.244-257
• /
• 2002

A thermotropic liquid crystalline polymer(TLCP) which has flexible butylene/hexylene spacers in the main chain and a triad aromatic ester type mesogenic unit containing a naphthyl group was prepared by solution polycondensation. The in-situ composites based on poly(ethylene 2,6-naphthalate) (PEN) and a thermotropic liquid crystalline polymer(TLCP) were prepared and melt spun at different TLCP contents and different draw ratios to produce monofilaments. Blends of the TLCP with PEN were investigated in terms of thermal, mechanical properties and morphology. The TLCP synthesized showed nematic mesophasic behavior and its transition temperature to isotropic melt from mesophase was 249℃. The blends showed well dispersed TLCP phases in the PEN matrix without macroscopic phase separation. Inclusion of TLCP in the blends decreased the cold crystallization temperature of PEN in the blend, therefore, the TLCP acts as a nucleating agent in the blend and showed good interfacial adhesion between the dispersed LCP phases and PEN matrix with domain sizes 40~50 nm in diameter and well developed fibrillation in the monofilaments. The TLCP acted effectively as a reinforcing material in the PEN matrix at the 10wt% level, it led to an increase of initial modulus up to 270% and tensile strength by 235%, while the elongation rate increasing with higher draw ratios.