• 비파괴검사학회지
• /
• 제24권4호
• /
• pp.348-353
• /
• 2004

이 연구는 터빈베어링의 신뢰성을 평가하기 위하여 초음파 C-Scan 방법을 적용한 기술이다. 수침법에 관한 연구는 실험실과 현장검사 적용에 광범위하게 사용되는 기술이다. 여기에서는 C-Scan 방법을 이용하여 베어링의 모재와 Babbitt 금속간 경계부의 상태를 평가하였다. 수침법 C-Scan 방법에 의한 초음파 영상은 베어링 경계부의 상태를 확인하는데 효과적인 방법으로 사용될 수 있었다. 초음파 영상의 분해능을 높이기 위하여 집속형 탐촉자를 사용하고, Babbitt 금속과 베어링 모재간의 접합경계면에서 발생하는 초음파 음압 반사율을 측정하여 결함의 검출과 면적을 추정할 수 있었다. 초음파 수침법은 베어링 접합부의 박리위치와 박리면적의 경계면을 결정하여 크기를 계산하는데 아주 유용하게 사용될 수 있는 기술이며, 이 연구에서 개발된 기술은 화력발전소에서 사용되고 있는 터빈베어링의 건전성을 확보하는데 적용되었다.

• 정보과학회 논문지
• /
• 제42권11호
• /
• pp.1386-1396
• /
• 2015

안드로이드(Android) 어플리케이션(앱)의 신뢰성과 사용성 검증을 위해, 앱의 기능 검사와 크래쉬(Crash) 탐지 등을 위한 다양한 GUI 테스팅(Graphical User Interface Testing) 기법이 널리 사용되고 있다. 그 중 모델 기반(Model-based) GUI 테스팅 기법은 GUI 모델을 이용해 테스트 케이스를 생성하기 때문에, 기법의 유효성(Effectiveness)은 기반 모델의 정확도에 의존적이다. 따라서 모델 기반 기법의 유효성 향상을 위해서는 테스트 대상 앱의 행위를 충분히 반영할 수 있는 모델 생성 기법이 필요하며, 이를 위해 본 연구에서는 GUI 상태를 정밀하게 구분하는 계층적 화면 비교 기법을 통해 테스팅의 유효성과 효율성을 향상시키고자 한다. 또한, 기존 연구 기법과의 비교 실험을 통해 제안 기법이 유효한 모델의 효율적 생성을 가능하게 함을 확인함으로써, 모델 기반 안드로이드 GUI 테스팅의 성능 향상 가능성을 제시한다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 춘계학술대회논문집
• /
• pp.355-362
• /
• 2009

Most material of engineering interest undergoes solidification process from liquid to solid state. Identifying the underlying mechanism during solidification process is essential to determine the microstructure of material which governs the physical properties of final product. In this paper, we expand our previous two-dimensional numerical technique to three-dimensional simulation for computing dendritic solidification process with fluid convection. We used Level Contour Reconstruction Method to track the moving liquid-solid interface and Sharp Interface Technique to correctly implement phase changing boundary condition. Three-dimensional results showed clear difference compared to two-dimensional simulation on tip growth rate and velocity.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.231-233
• /
• 2005

For the low-power design of the mobile multimedia system architecture, this paper modeling the mobile multimedia system and analysis the power consumption profile about the whole communication environment. The mobile system model consist of air interface, RIP front-end, base-band processing module and human interface. For the result of power consumption profile analysis, the power consumption of multimedia processing is above 60% compare to the whole power consumption in mobile multimedia system. To minimize the power consumption in processing module which consumes the large power, this paper proposed the Microscopic DVS technique which applies the optimum voltage for the each multimedia frame. For the simulation result, proposed power minimization technique reduce the power consumption about 30%.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1257-1260
• /
• 2003

Rapid Prototyping technology has many advantages such as Rapid Tooling. However, Using the RT technique is limited by the poor surface quality of the RP part. Thus, additional post-machining is required for improving the surface roughness by the sanding, grinding and polishing etc. But, these traditional finishing techniques are time and labor cost consuming. Hence, improving and formulation the finishing technique is inevitably necessary for the RF part. A new post-machining methodology for RP part is presented by the SLS part is used for automobile components in this research. Also, a web based interface tool that user requirements are rapidly ordered for post-machining RP part is developed.

• 품질경영학회지
• /
• 제20권1호
• /
• pp.91-100
• /
• 1992

A diagnosis system for naphtha reforming process has been designed and implemented using expert system building technique. The system is composed of knowledge base, inference engine, user interface, database and database interface. The concept and the method of this system may be applied to development of other systems for the reforming process.

• 대한자원환경지질학회:학술대회논문집
• /
• 대한자원환경지질학회 2007년도 춘계 지질과학기술 공동학술대회
• /
• pp.569-571
• /
• 2007

See Full Text

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 가을 학술발표회 논문집
• /
• pp.255-262
• /
• 1999

This paper summarizes the results of a study which uses the recently developed Optical Profile Microscopy technique (Dove and Frost, 1996) as the basis for investigating the role of geomembrane surface roughness on the shear strength of goomembrane/geotextile interfaces. The results show that interface friction can be quantitatively related to the surface roughness of the geomembrane. The peak and residual interface strengths increase dramatically through the use of textured geomembranes as opposed to smooth geomembranes. For the smooth geomembranes, the sliding of the geotextile is the main shear mechanism. For the textured geomembranes, the peak interface strength is mainly mobilized through the micro-texture of the geomembrane, however, the residual interface strength is primarily attributed to macro scale surface roughness which pulls out and breaks the filaments from the geotextile. The results of this study can be extended to the other interfaces such as joints in rock mass, and also can be used to provide a quantitative framework that can lead to a significantly improved basis for the selection and design of geotextiles and geomembranes in direct contact.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.346-349
• /
• 1988

Conductance technique is the moat accurate method and gives more detailed information about interface of the MIS structure than other methods. With the measurement of the equivalent parallel conductance and capacitance, the characterization of Si-SiN interface is developed. The interface state density of Si-SiN is obtained by $8{\times}10^{11}$ - $6{\times}10^{12}(eV^{-1}cm^{-2}$). After the positive B-T stress is performed on the sample, the interface state density gets increased. The interface state density is not effected by the D.C. stress.

• Structural Engineering and Mechanics
• /
• 제29권4호
• /
• pp.423-431
• /
• 2008

With respect to thermal barrier coating, the analysis of interface cohesion and residual stress is important to the life of TBC from mechanical view point. Up to now, there is not a model of describing interface cohesion. In the paper, we give a simple model of computing residual stress and study the residual stress of TBC with ANSYS. The distribution of the residual stress in different interface topography and the relationship between the residual stress and the interface topography dimension are presented.