• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.5 s.335
• /
• pp.23-28
• /
• 2005

Recently, new concept, NP(Network Processor) was emerged into communication systems to cope with the various service requirements from Internet users. NP is an unique promising technique to capable of implementing of the packet processing in wire-speed and providing the flexibility for supporting the newly network services, having satisfied with implementation using hardware and software respectively in past, This paper deals with the implementation techniques and evaluation results of the line card capable to do packet forwarding function with packet processing power of wire-speed and applicable to various physical interfaces. There are several interfaces of POS, Gigabit ethernet and EPON in E-OLT(EPON Optical Line Terminal) system of PATH(Photonic Access To Home) network. Therefore, the E-OLT's packet forwarding engine have to support various subscriber's interface in wire speed. Our system is implemented the subscriber's card in daughter board and the setup procedure is done by system firmware based on the module's identifier acquired from installed physical board.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.3
• /
• pp.193-200
• /
• 2006

This paper suggests a 6-pulse-shift converter structure with PWM current-source inverter based on buck-boost configuration to improve the efficiency and to reduce the switching frequency of inverter for photovoltaic generation system, the device can be operated as interface system between solar module system and power system grid without energy storage cell. The circuit has six current-source buck-boost converter which operate chopper part and kas one full bridge inverter which make a decision the polarity of AC output. Therefore, the proposed PWM power inverter has advantages such as the reduction of witching loss and realization of unity power factor operation. The theoretical backgrounds are discussed and the input-output characteristics for the implemented prototype inverter using TMS320F2812 are verified experimentally in this paper.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.6 s.38
• /
• pp.75-84
• /
• 2005

Bulletin board systems have evolved to support diverse multimedia data as well as text. However, current board systems have an weakness : it takes much time and efforts for users to figure out contents of articles. Most board systems provide a searching function with lexical level data access for solving that problem, however it fails to serve users' intented searching results. Moreover, it is nearly impossible to search proper articles if they contain multimedia data. This paper proposed a bulletin board system adopting the Semantic Web to solve this issue. The proposed system provides users with new ontology which is used for describing articles' domain knowledge and multimedia features. Users can describe their own board ontology using the proposed ontology. To support semantic-based searching for diverse domain knowledge without modification of the system, the system dynamically generated input/query interface and RDF data access module according to the board ontology written by administrators. The proposed board system shows that semantic-based searching is feasible and effective for users to find their intended articles.

• Journal of Korea Multimedia Society
• /
• v.8 no.3
• /
• pp.389-397
• /
• 2005

In this paper, we study the synchronization method of animated simulations and VRs for on-line virtual reality education system. To build the data of animated simulations and synchronization modules of VRML content, the media-synchronizing technology, HTML + TIME and scripts are used. The VRML control module ismade into Java applet using the Java EAI provided for the web and the interface for VRML contents. To control the animation of VRML contents, the node information is extracted, and an animation production template capable of controlling animation in inter-connection with VRML content is made. With evaluation of the animation control performance, processing speed, synchronization performance between media in the system built, more improved results are obtained. We would like to suggest a education system with easy system construction and various multi-medium applicability by realizing HTML + TIME media synchronization and VRML web 3D virtual reality creation techniques, and animated images and 3D animation controls according to time using Java through this study.

• Bioinformatics and Biosystems
• /
• v.1 no.1
• /
• pp.38-45
• /
• 2006

We present a client-server system architecture for inferring genetic interaction networks based on Bayesian networks. It is typical to take tens of hours when genome-wide large-scale genetic interaction networks are inferred in the form of Bayesian networks. To deal with this situation, batch-style distributed system architectures are preferable to interactive standalone architectures. Thus, we have implemented a loosely coupled client-server system for network inference and user interface. The network inference consists of two stages. Firstly, the proposed method divides a whole gene set into overlapped modules, based on biological annotations and expression data together. Secondly, it infers Bayesian networks for each module, and integrates the learned subnetworks to a global network through common genes across the modules.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.4
• /
• pp.961-968
• /
• 1996

In the frame of Koreasat Project, it has been identified the task to implement a pilot satellite network module to provide LAN-to-LAn in ground system for satellite links. The pilot network will support an experiment to verify the performances of the considered applications through a satellite.This paper proposes a satellite-LAN interconnecting architecture making full use of satellite benefits and counteracting satellite demerits. The architectureprovides high quality data transmission and high perfrmance for satellite bit errors by using a connection- oriented satellite protocol which can establish multiple logical links between two nodes. As a protocol conversion method, router-type interconnection was selected to guard against problems. Based on this architecture, a satellite LAN interconnecting system has been designed, which includes a 1.8 meter antenna with a 4 watt transceiver, a satellite modem and the developed satellite network interface. The system can support high speed transmission rates of up to 1.544 Mbs and superior network management as well.

• The KIPS Transactions:PartA
• /
• v.17A no.3
• /
• pp.145-152
• /
• 2010

Most wearable system for mobile healthcare applications consists of three parts. The first part is the sensing elements based on bio-signal, the second is the circuit module for control, data acquisition and wireless communication and control and the third is garment with a built-in electrodes and circuits. The existing healthcare garment systems have to find a solution to signal-wire and uncomfortable and inappropriate electrode to long-term attachment. Even if the wireless communication is used for healthcare garment system, the interface between sensors and circuits have to use wires. To solve these problems, this paper use electrode using PEDOT coated PVDF nanoweb for ECG signal and PVDF film sensor for respiratory signal. And, we constructed garment network using digital yarn of 10um, and transmitted ECG and respiratory signal to mobile phone through the integrated circuit with bluetooth called station To evaluate feasibility of the proposed mobile healthcare garment system, we experimented with transmission and measurement of ECG and respiratory signal using nanoweb electrode and digital yarn. We got a successful result without noise and attenuation.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.5
• /
• pp.1153-1164
• /
• 2012

In this paper, we propose an efficient car management system based on object-oriented modeling using car number recognition and smart phone. The proposed system perceives car number of repair vehicle after recognizing the licence plate using an IP camera in real time. And then, existing repair history information of the recognized car is be displayed in DID. In addition, maintenance process is shooting video while auto maintenance mechanic repairs car through IP-camera. That will be provide customer car identification and repairs history management function by sending key frames extracted from recorded video automatically. We provide user graphic interface based on web and mobile for your convenience. The module design of the proposed system apply software design modeling based on granular object-oriented considering reuse and extensibility after implementation. Car repairs center and maintenance companies can improve business efficiency, as well as the requested vehicle repair can increase customer confidence.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.9
• /
• pp.4341-4348
• /
• 2012

This paper presents a web-based real-time monitoring system for a photobioreactor using an WiFi wireless network. An WiFi interface can support high speed data transfer, up to 11Mbps and it can be compatible with commercial wireless LAN environment. Thus, the proposed cell culture based on WiFi network can be easily applied to the reconfigurable system and real-time monitoring system. In this paper, we integrate the commercial WiFi module to the various bio-sensors and sensor control board to configure the wireless network. After we evaluate application S/W for monitoring the environment within incubator, we verify the proposed sensor networks for a cell culture system and its monitoring system. This result can be applicable for various bio-applications that require the network configuration and real-time monitoring system.

• BMB Reports
• /
• v.39 no.4
• /
• pp.441-447
• /
• 2006

Abuse of drugs can elicit compulsive drug seeking behaviors upon repeated administration, and ultimately leads to the phenomenon of addiction. We developed a procedure for the standardization of microarray gene expression data of rat brain in drug addiction and stored them in a single integrated database system, focusing on more effective data processing and interpretation. Another characteristic of the present database is that it has a systematic flexibility for statistical analysis and linking with other databases. Basically, we adopt an intelligent SQL querying system, as the foundation of our DB, in order to set up an interactive module which can automatically read the raw gene expression data in the standardized format. We maximize the usability of this DB, helping users study significant gene expression and identify biological function of the genes through integrated up-to-date gene information such as GO annotation and metabolic pathway. For collecting the latest information of selected gene from the database, we also set up the local BLAST search engine and non-redundant sequence database updated by NCBI server on a daily basis. We find that the present database is a useful query interface and data-mining tool, specifically for finding out the genes related to drug addiction. We apply this system to the identification and characterization of methamphetamine-induced genes' behavior in rat brain.