• 대한전자공학회논문지TC
• /
• 제49권1호
• /
• pp.59-67
• /
• 2012

본 논문은 10G G-PON(Gigabit passive optical network) 네트워크와 NGN(Next generation network) 연동 구조를 설계하고, 10G G-PON 연동 시 문제점 해결을 위한 동적 GEM(G-PON encapsulation mode) Port-ID 할당 방법을 제안했다. 동적 GEM Port-ID 할당 방법은 OMCI(ONT management control and interface) 구조 설계를 통해 IP 주소와 포트 번호를 혼합한 형태의 맵핑 구조를 갖는다. 이는 NGN이 요구하는 클래스 기반 QoS(Quality of service) 뿐만 아니라 트래픽 단위의 QoS 지원까지 가능한 구조로서, 기존 G-PON 네트워크를 NGN에 그대로 적용시킨 구조 보다 QoS 지원에 있어 30% 이상 성능을 향상 시킨다.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제8권3호
• /
• pp.268-276
• /
• 2002

본 논문에서는 UML 개발도를 이용하여 테스트 데이타를 자동 생성하는 방안을 제안하고, XML 기술을 이용하여 개발한 "테스트 데이타 자동화 도구인 AUTEG(Automatic UML-Based Test Data Generation)"를 "Insurance System"의 사례에 적용한 결과를 분석 기술한다. AUTEG는 전체 시스템을 구성하는 모듈 사이의 인터페이스(interface)영역에 존재하는 오류 추출이 가능한 테스트도(test diagram)와 기존의 화이트 박스 테스트(white-box test)기법을 테스트도에 적용하여 테스트 데이타를 자동 생성한다. 또한 AUTEG는 통합 테스트와 시스템 테스트에 적용할 수 있으며, 사용자가 통합 테스트의 단위 모듈을 자유롭게 그룹화 할 수 있다.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 2004년도 추계학술대회
• /
• pp.58-58
• /
• 2004

• 한국해양공학회지
• /
• 제17권1호
• /
• pp.72-79
• /
• 2003

This paper deals with the development of an interface program for automatic plate forming, which can exchange information between the heating line information generation program and the automatic heating apparatus. In this paper, the performance of the developed interface program has been verified from the view point of numerical position control. By applying the interface program to the operation of the automatic heating apparatus, an experiment of line heating has been conducted for several steel plate models. Based on the experimental results, a simplified relation to estimate angular distortion has keen derived as a natural characteristic of the present automatic heating apparatus. As a result of the present study, the prototype of the automatic plate forming system has been constructed, and its application to the real surface models found in the ship will be presented in the near future.

• Journal of Advanced Research in Ocean Engineering
• /
• 제1권1호
• /
• pp.36-43
• /
• 2015

Since the crack generation and its propagation caused by welding defects is one of the main hull damage patterns, the simulation of crack propagation process has an important significance for ship safety. Based on interface element method, a finite element model to simulate crack propagation is studied in the paper. A Lennard-Jones type potential function is employed to define potential energy of the interface element. Tensile tests of steel flat plates with initial central crack are carried out. Surface energy density and spring critical stress that are suitable for the simulation of crack propagation are determined by comparing numerical calculation and tests results. Based on a large number of simulation results, the curve of simulation correction parameter plotted against the crack length is calculated.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 II
• /
• pp.1141-1144
• /
• 2003

For proper communication with various types of IC-Card, multiple IC-Card interface complying with the IC-Card standard (ISO7816) is embedded and realized as a peripheral on the 32-bit RISC based system-on-a-chip. It provides the generation of either 3.3V or 5V power supply for the operation of the inserted IC-Card as well. IC-Card interface is divided into an analog front-end (AFE) and a digital back-end (DBE). The embedded DC-DC converters suitable for driving IC-Cards are incorporated in the AFE. The chip design for multiple IC-Card interface is implemented on a standard 0.35${\mu}{\textrm}{m}$ triple-metal double-poly CMOS process and is packaged in a 352-pin plastic ball grid array (PBGA). The total gate count is about 400,000, excluding the internal memory. Die area is 7890${\mu}{\textrm}{m}$ $\times$ 7890${\mu}{\textrm}{m}$.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.72-72
• /
• 2011

Surface science is intrinsically related to the performance of solar cells. In solar cells the generation and collection of charge carriers determines their efficiency. Effective transport of charge carriers across interfaces and minimization of their recombination at surfaces and interfaces is of utmost importance. Thus, the chemistry at the surfaces and interfaces of these devices must be determined, and related to their performance. In this talk we will discuss the role of two important interfaces, First, the role of surface passivation is very important in limiting the rate of carrier of recombination. Here we will combine x-ray photoelectron spectroscopy of the surface of a Si device with electrical measurements to ascertain what factors determine the quality of a solar cell passivation. In addition, the quality of the heterojunction interface in a ZnSe/CdTe solar cell affects the output voltage of this device. X-ray photoelectron spectroscopy gives some insight into the composition of the interface, while ultraviolet photoemission yields the relative energy of the two materials' valence bands at the junction, which controls the open circuit voltage of the solar cell. The relative energies of ZnSe and CdTe at the interface is directly affected by the material quality of the interface through processing.

• 스마트미디어저널
• /
• 제1권4호
• /
• pp.44-51
• /
• 2012

본 논문은 휴대단말을 위한 차세대 인터페이스 기술을 수용하기 위한 지능형 사용자 인터페이스 플랫폼인 SUIP를 기술한다. SUIP 플랫폼은 안드로이드 플랫폼을 확장하여 새로운 인터페이스 장치를 수용할 수 있도록 개발되었다. 새로운 인터페이스에 대한 응용 개발을 위하여 소프트웨어 모듈의 동적 로딩 기능을 지니고 있다. 또한, 사용자 인터페이스 품질을 높이기 위한 외부 장치 활용을 위한 플래폼 기술과, 서비스에 따른 전력 소모를 줄이기 위한 동적 인터페이스 스위칭 기술도 포함하고 있다.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1996년도 춘계학술대회논문집
• /
• pp.56-62
• /
• 1996

The main control room (MCR) of a nuclear power plant plays an important role in the operation of the plant. Since the traditional man-machine interface of the current MCR is old-fashioned, a next-generation MCR, that provides a VDT-based human-computer interface is being designed. This paper aims to provide a systematic and efficient method for converting a traditional man-machine interface of the MCR into a VDT-based one. Procedures and analysis methods are presented for efficient and effective development.

• 산업경영시스템학회지
• /
• 제22권49호
• /
• pp.153-161
• /
• 1999

GUI(Graphic User Interface) have an influence on end-user environments in information system. Consistency is one of the most important GUI characteristics. Consistency should apply across the different media which form the total user interface. User can get a lot of benefits through consistency. To achieve consistency of the total interface, the interface standards are very important. The goals of this study is to suggest GUI's development guidelines through analysis of real fields using ERP package in a electric assembly line. The guidelines fall into four functions: inquiry, registration, modification, deletion. The guidelines can be used for better system development later and as verification tool in GUI development.