• The Transactions of the Korean Institute of Power Electronics
• /
• v.21 no.3
• /
• pp.231-237
• /
• 2016

Recently, the interest in DC systems to achieve more efficient connection with renewable energy sources, energy storage systems, and DC loads has been growing extensively. DC systems are more advantageous than AC systems because of their low conversion losses. However, the DC-link voltage is variable during operation because of different random effects. This study focuses on DC voltage stabilization applied in stand-alone DC microgrids by means of voltage ranges, power management, and coordination scheme. The quality and stability of the entire system are improved by keeping the voltage within acceptable limits. In terms of optimized control, the maximum power should be tracked from renewable resources during different operating modes of the system. The ESS and VSDG cover the power shortage after all available renewable energy is consumed. Keeping the state of charge of the ESS within the allowed bands is the key role of the control system. Load shedding or power generation curtailment should automatically occur if the maximum tolerable voltage variation is exceeded. PSIM-based simulation results are presented to evaluate the performance of the proposed control measures.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.2
• /
• pp.112-116
• /
• 2018

Electric double layer capacitors (EDLCs) are promising candidates for energy storage devices in electronic applications. An EDLC yields high power density but has low specific capacitance. Carbon material is used in EDLCs owing to its large specific surface area, large pore volume, and good mechanical stability. Consequently, the use of carbon materials for EDLC electrodes has attracted considerable research interest. In this paper, in order to evaluate the electrochemical performance, graphene is used as an EDLC electrode with flake sizes of 3, 12, and 60 nm. The surface characteristic and electrochemical properties of graphene were investigated using SEM, BET, and cyclic voltammetry. The specific capacitance of the graphene based EDLC was measured in a 1 M $TEABF_4/ACN$ electrolyte at the scan rates of 2, 10, and 50 mV/s. The 3 nm graphene electrode had the highest specific capacitance (68.9 F/g) compared to other samples. This result was attributed to graphene's large surface area and meso-pore volume. Therefore, large surface area and meso-pore volume effectively enhances the specific capacitance of EDLCs.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1236_1237
• /
• 2009

Organic light emitting diode (OLED) is currently the focus of intense interest in the field of photonics. It is attractive for the in low-operating voltage, low power consumption, easy fabrication and low cost. A typical OLED consists of one or more organic layers sandwiched between a high work function anode, such as indium tin oxide (ITO), and a low work function cathode such as Ca, Mg:Ag, and Al. Tris-(8-hydroxy)quinolinealuminum ($Alq_3$) has taken a prominent position in the development of OLED due to its relative stability as an electron transporting and emitting material. We investigated an efficiency improvement of the OLED depending on thickness variation of $Alq_3$.

• Journal of the Korean Society of Groundwater Environment
• /
• v.7 no.1
• /
• pp.8-14
• /
• 2000

The present day, interest in low flow statistics has been increased, primarily because of the increase in water demands and the contamination of water quality and the limitation of water resource development and the annual water supply stability. The model for estimating low flow statistics is points of this study chosen catchments in the Youngsan basin. For the purpose of this study. the low-flow discharge at 23 points, where absent gauging station is unmeasured and the data is used for the model. Finally, the regional formula to estimate the low flow statistics at the unmeasured point is proposed.

• Journal of Microbiology and Biotechnology
• /
• v.24 no.2
• /
• pp.177-187
• /
• 2014

Microbial phytases are enzymes with biotechnological interest for the feed industry. In this article, the effect of spray-drying conditions on the stability and activity of extracellular phytase produced by R. microsporus var. microsporus biofilm is described. The phytase was spray-dried in the presence of starch, corn meal (> $150{\mu}m$), soy bean meal (SB), corn meal (< $150{\mu}m$) (CM), and maltodextrin as drying adjuvants. The residual enzyme activity after drying ranged from 10.7% to 60.4%, with SB and CM standing out as stabilizing agents. Water concentration and residual enzyme activity were determined in obtained powders as a function of the drying condition. When exposed to different pH values, the SB and CM products were stable, with residual activity above 50% in the pH range from 4.5 to 8.5 for 60 min. The use of CM as drying adjuvant promoted the best retention of enzymatic activity compared with SB. Spray drying of the R. microsporus var. microsporus phytase using different drying adjuvants showed interesting results, being quite feasible with regards their biotechnological applications, especially for poultry diets.

• Journal of Powder Materials
• /
• v.15 no.1
• /
• pp.58-62
• /
• 2008

Reaction bonded silicon carbide (RBSiC) is an important engineering ceramic because of its high strength and stability at elevated temperatures, and it is currently fabricated using reasonably cheap manufacturing processes, some of which have been used since the 1960s. However, forming complicated shapes from these materials is difficult because of their poor workability. The purpose of this work is to join the reaction-bonded SiC parts using a preceramic polymer as joint material. The manufacturing of ceramic material in the system Si-O-C from preceramic silicon containing polymers such as polysiloxanes has attained particular interest. The mixtures of preceramic polymer and filler materials, such as SiC, Si and MoSi, were used as a paste for the joining of reaction sintered SiC parts. The joining process during the annealing in Ar atmosphere at $1450^{\circ}C$ were described. The maximum strength of the joints was 63 MPa for the specimen joined with 10 vol.% of $MoSi_2$ and 30 vol.% of SiC as filler materials. Fracture occurred in the joining layer. This indicates that the joining strength is limited by the strength of the joint materials.

• Structural Engineering and Mechanics
• /
• v.35 no.2
• /
• pp.141-173
• /
• 2010

In this paper a boundary element method is developed for the general flexural-torsional buckling analysis of Timoshenko beams of arbitrarily shaped cross section. The beam is subjected to a compressive centrally applied concentrated axial load together with arbitrarily axial, transverse and torsional distributed loading, while its edges are restrained by the most general linear boundary conditions. The resulting boundary value problem, described by three coupled ordinary differential equations, is solved employing a boundary integral equation approach. All basic equations are formulated with respect to the principal shear axes coordinate system, which does not coincide with the principal bending one in a nonsymmetric cross section. To account for shear deformations, the concept of shear deformation coefficients is used. Six coupled boundary value problems are formulated with respect to the transverse displacements, to the angle of twist, to the primary warping function and to two stress functions and solved using the Analog Equation Method, a BEM based method. Several beams are analysed to illustrate the method and demonstrate its efficiency and wherever possible its accuracy. The range of applicability of the thin-walled theory and the significant influence of the boundary conditions and the shear deformation effect on the buckling load are investigated through examples with great practical interest.

• Journal of the Korean Applied Science and Technology
• /
• v.19 no.3
• /
• pp.189-197
• /
• 2002

The color stability and purity from OLED is of current interest. Aggregation of dyes alters the device color after fabrication of the devices. Exciplex and electroplex formations have been proposed to explain the aggregate color change. We investigate the possibility of exciplex formation and propose the new electroplex state that can cause the bathochromic shift of the electroluminescence spectrum from the devices with TPD/PBD layers. The photoluminescence maximum of the device was 420nm, and the electroluminescence maximum of the device to became 480nm. The bathochromic shift cannot be attained with photoluminescence study with highly concentrated TPD/PBD mixture. This clearly indicates that the 480nm spectrum of the devices is not resulted from the exciplex formation with TPD and PBD. We observed the overshoot in EL spectrum from the OLEDs. The most intense overshoot was observed at 460nm, which may be due to the aggregates that are formed after the electric field has been removed from the devices.

• The Journal of Industrial Distribution & Business
• /
• v.8 no.2
• /
• pp.5-10
• /
• 2017

Purpose - The purpose of this paper was to analyze the Chinese government's announcement of the RMB's appreciation on July 1, 2010, and its aim was to ascertain whether the appreciation has affected Chinese export prices by empirically measuring the degree of the exchange rate pass-tough on those prices. Research design, data, and methodology - Using 73 HS trade categories with cross-industry and time-series data, the panel estimation of a fixed-effects model has been applied to measure the degree and stability of any exchange rate pass-through effects. The estimation results show that the export prices of most trade categories were affected by the exchange rate changes. The pass-through effect was generally small, at about -0.485, and statistically significant in most export prices. Results - The empirical results indicate that China would lose its advantage and competitiveness in export if the RMB were appreciated continuously and rapidly because its export goods would no longer operate under strong monopolistic competition. Conclusions - The implications for China's exchange rate policy suggest that it would be better for the RMB to appreciate slowly and gradually rather than radically. It is clear that it would be allow the capital free flow in Chinese overall economic interest to reduce the continuous appreciation pressure on the currency and pave the way for improvements in export distribution competitiveness.

• Journal of Astronomy and Space Sciences
• /
• v.29 no.1
• /
• pp.79-84
• /
• 2012

After a visit by Peter Waddell from the University of Strathclyde, Glasgow, UK in 1991, Robert H. Koch launched a program at the University of Pennsylvania to build lightweight pneumatic membrane mirrors, initially for balloon flight observations where weight is at a premium. Mirror cells were fabricated from sizes 0.18 m to 1.77 m, and experiments conducted to characterize the mirror figure and stability. Most of the work stopped after Prof. Koch's retirement in 1996 until 2006 when the authors expressed an interest in building an array of medium-aperture portable telescopes. The program restarted in earnest at Gravic, Inc. in Malvern, PA in 2008 with Koch using his extensive observational astronomy experience to guide the fabrication of a fully operational 1.07 m membrane mirror telescope with an optical tube assembly weighing under 45 Kg. Residual wavefront aberrations remediation resulted in Koch and the authors investigating membrane tensioning techniques with different cell designs, active secondary wavefront correction, photometric algorithms for aberrated images, and the use of additional lightweight mirror substrates from the Alt-Az Initiative Group, such as foamed glass. The best result for the lightweight mirrors was a point spread function spot size of several arc seconds. A lightweight 1.6 m cast aluminum cell alt-az telescope was subsequently designed by Koch and the authors for prime focus use.