• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.5
• /
• pp.89-96
• /
• 2012

In this paper, a low phase noise oscillator is designed using an interdigital hairpin resonator for UTIS (Urban Traffic Information Systems). The interdigital hairpin resonator has several characteristics compared with a conventional hairpin resonator, which are 70% size reduction and improvement of harmonic characteristics. In addition, Q (Quality factor) of the interdigital hairpin resonator is about 132, which is suitable for the design of a low phase noise oscillator. The oscillator suggested in this paper shows the output power of 12 dBm and the phase noise characteristic of -100.8 dBc/Hz at 100 kHz offset frequency from the center frequency of 5.75 GHz. The phase noise is improved by about 12 dB compared with a conventional oscillator using an interdigital hairpin resonator.

• Journal of Advanced Navigation Technology
• /
• v.28 no.4
• /
• pp.538-543
• /
• 2024

In this paper, the miniaturization of a chipless RFID tag using an interdigital-capacitor-shaped slot was studied. The proposed interdigital-capacitor-shaped slot was appended on the rectangular conductor plate printed on one side of a 20 mm × 50 mm FR4 substrate with a thickness of 0.8 mm. The resonant dip frequency of the bistatic RCS for the proposed interdigital-capacitor-shaped slot was compared with the cases when the H-shaped and modified bent H-shaped slots were added, respectively, on the conductor plate. The simulated resonant dip frequencies for H-shaped and modified bent H-shaped slots were 5.907 GHz and 3.741 GHz, respectively. When the proposed interdigital-capacitor-shaped slot was added, the resonant dip frequency was decreased to 2.889 GHz, and, therefore, the slot length was reduced by 51.1% compared to the H-shaped slot case. Experiment results show that the resonant dip frequency of the fabricated nterdigital-capacitor-shaped slot was 3.07 GHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.3
• /
• pp.402-405
• /
• 2012

In this paper, we proposed a novel metamaterial unit cell utilizing an interdigital capacitor(IDC) with non-bianisotropic property. Due to the induced magnetic resonance of an IDC unit cell, exotic effective constitutive parameters can be realized like a split ring resonator(SRR). Furthermore, the proposed unit cell is electrically smaller than a conventional SRR unit cell. The effective parameters retrieved from the transmission responses of waveguide measurement method and simulated results show good agreement.

• Electrical & Electronic Materials
• /
• v.10 no.3
• /
• pp.233-238
• /
• 1997

We have investigated gas-detection characteristics of CuTBP (Copper-tetra-tert-butylphthalocyanine) chemiresistor devices exposed to air/200ppm N $O_{2}$ gases. The CuTBP films were made by Langmuir-Blodgett (LB) techniques. Sensitivity, response time, recovery time, and reproducibility of the devices were measured by current voltage characteristics. Interdigital electrode was used to improve the sensitivity. It was observed that a conductance G increases monotonically as the number of interdigital electrode finger pairs increases. As the number of interdigital electrode finger pairs increases, the sensitivity S( $G_{gas}$/ $G_{air}$) increases more than 50 times and stable. But the response time was delayed. The average recovery time of the CuTBP chemiresistor devices turned out to be about 100 second. We have also investigated applicability of the CuTBP chemiresistor device for a gas sensor.sor.

• Journal of the Microelectronics and Packaging Society
• /
• v.11 no.1
• /
• pp.71-76
• /
• 2004

A compact embedded tapped-line combline filter with interdigital capacitors using low temperature co-fired ceramic (LTCC) technology for wireless application is proposed. Also, in-situ measurement using T-pattern microstrip resonator was performed to acquire exact knowledge of electrical properties of the LTCC substrate. The proposed filter makes it possible to realize a relatively small size, 2.7mm${\times}$2.03mm. by employing interdigital and combline structure. It shows 1.8 ㏈ insertion loss, 37.6㏈ return loss, and 280 MHz bandwidth at the center frequency of 5.09 GHz. Its small size and simple structure make it a good candidate as an integrated filter for various LTCC substrates.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1713-1715
• /
• 1996

The $NO_2$ GAS Sensitivity characteristic of CuTBP(Copper-tetra-tert-butylphthalocyanine) LB films were investigated through a study of current-voltage (I-V) characteristics with a variation of number of electrode finger pairs N ($1{\sim}25$). A concentration of 200ppm $NO_2$ gas was used. It was found that a conductance G increases monotonically as the number of interdigital electrode increases, and a Sensitivity, Reproducibility is stable. As far as a current is concerned, the current when N=25 is greater than that when N=1 by 70 or so. It indicates that the number of interdigital electrodes affects the current, sensitivity and stability. We knew that the $NO_2$ gas detector application possibility using a current of N=25.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.286-286
• /
• 2007

Li이 첨가된 0.7(Ba,Sr)$TiO_3$-0.3MgO 후막 interdigital 커패시터를 연구하였다. Li이 첨가된 0.7(Ba,Sr)$TiO_3$-0.3MgO의 후막을 $Al_2O_3$ 기판 위에 형성하기 위하여 스크린 프린팅 방법을 이용하였다. $BaSrTiO_3$의 세라믹 물질은 높은 유전율(1MHz에서 500이상)과 낮은 유전 손실(1MHz에서 0.01)값을 가지고 있는 반면, $1350^{\circ}C$의 높은 온도에서 소결되는 단점이 있다. 따라서 본 연구에서는 $BaSrTiO_3$ 세라믹 물질의 유전특성을 향상시키고 $1350^{\circ}C$의 높은 소결온도를 낮추기 위해서, MgO(30wt%)와 Li(3wt%)을 $BaSrTiO_3$에 첨가하였다. 그리고 10um의 후막을 $Al_2O_3$ 기판 위에 스크린 프린팅 방법을 통해 형성한 후, 50um finger gap의 interdigital 커패시터를 Ag 전극을 이용하여 제작하였다. 샘플을 제작하기 전에, Frequency와 유전율의 상관관계를 알아보기 위해 3D simulator를 통해 시뮬레이션 하였고, 주파수와 온도별 유전 특성, 구조와 전암-전류에 대한 특성을 본 연구의 결과를 통해 토의 할 것이다.

• Journal of Korean Foot and Ankle Society
• /
• v.8 no.1
• /
• pp.58-63
• /
• 2004

Purpose: The purpose of this study is to evaluate the effectiveness of low-dose gabapentin for interdigital neuroma. Metrials and Methods: Between April 2000 and June 2003, 32 patients (39 feet) with interdigital neuroma were treated with using low-dose gabapentin. Two of the 32 patients were male, and thirty were female, and the average age was 47.4 years. The follow-up was 6 to 44months (mean 15.1 months). All cases were diagnosed by physical examination and ultrasonography or MRI. Low-dose gabapentin (300-600 mg) was prescribed and shoe modification was recommended. The patients were evaluated through questionnaire. Results: Neuroma was found in twenty one cases at the third intermetatarsal space, and thirteen at the second intermetatarsal space. The sensitivity of ultrasonography was 96% and that of MRI was 79%. Overall satisfaction was rated as excellent or good by 18 cases (57%). Average pain relief ratio was 50.3%, and in 14 cases, more than 80% of pain relief was noted. Nine (28%) of 32 patients showed they had no activity restrictions, such as daily activities or work, whereas 8 (25%) had mild restrictions and 15 (47%) had major restrictions. Twelve of 15 patient with major restrictions had been treated operatively (neurectomy; 10 cases, decompression; 2 cases). One case had gastrointestinal problem. Conclusion: Low-dose gabapentin for interdigital neuroma was one of the effective conservative treatments. The operation may be preserved for patient with the persist symptoms, nevertheless the conservative treatments and use of low-dose gabapentin.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.278-282
• /
• 2003

The rapid growth of wireless and mobile communications has stimulated the development of multilayer filter technology. In this paper, one type of aperture-coupled microstrip interdigital-loop resonators in a multilayer structure are proposed and investigated for the applications to the design of a new class of compact microstrip bandpass filter. The new filter configuration consists of two arrays of microstrip interdigital-loop resonators that can be coupled through the apertures on the common ground plane. Depending on the arrangement of the apertures, different filtering characteristics can easily be realized. The results of measurement are almost similar to those of simulation.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.251-255
• /
• 2003

In this paper, a miniaturized directional coupler utilizing lumped element is proposed as a interdigital capacitor. The traditional miniaturization technique of transmission line realized a utilizing MIM(Metal-Insulator-Metal) capacitor on CPW(Coplanar Waveguide). However, we present a simplified design procedure without additional manufacturing process utilizing interdigital capacitor on microstrip with ease of design. The similar characteristics between the conventional directional coupler with ${\lambda}/4$ transmission line and the miniaturized directional coupler with ${\lambda}/8$ transmission line are validated through simulation and measurement results. Miniaturization rate of total size is about 25% while coupled line is about 60%. As a result, this proposed directional coupler can reduce the size of mobile communication system at 2 GHz.