• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.5
• /
• pp.480-488
• /
• 2012

The aircrafts with high aspect ratio wings made by a composite material have been developed, which enable high energy efficiency and long-term flight by reducing air resistance and structural weight. However, they have difficulties in securing the aeroelastic stability such as the flutter because of their long and flexible wings. The flutter is unstable self-excited-vibration caused by interaction between the structural dynamics and the aerodynamics. It should be verified analytically prior to first flight test that the flutter does not happen in the range of flight mission. Normally, the finite element model is used for the flutter analysis. So it is important to construct the finite element model representing dynamic characteristics similar to those of a real aircraft. Accordingly, in this research, to acquire dynamic characteristics experimentally the modal test of the aircraft with high aspect ratio composite wings was conducted. And then the modal parameters from the finite element analysis(FEA) were compared with those from the modal test. To make analysis results closer to test results, the finite element model was updated by means of the sensitivity analysis on variables and the optimization. Finally, it was proved that the updated finite element model is reliable as compared with the results of the modal test.

• Geomechanics and Engineering
• /
• v.20 no.5
• /
• pp.461-474
• /
• 2020

Analysing the incompatible deformation and damage evolution around the tunnels in mixed strata is significant for evaluating the tunnel stability, as well as the interaction between the support system and the surrounding rock mass. To investigate this issue, confined compression tests were conducted on upper-soft and lower-hard strata specimens containing a circular hole using a rock testing system, the physical mechanical properties were then investigated. Then, the incompatible deformation and failure modes of the specimens were analysed based on the digital speckle correlation method (DSCM) and Acoustic Emission (AE) data. Finally, numerical simulations were conducted to explore the damage evolution of the mixed strata. The results indicate that at low inclination angles, the deformation and v-shaped notches inside the hole are controlled by the structure plane. Progressive spalling failure occurs at the sidewalls along the structure plane in soft rock. But the transmission of the loading force between the soft rock and hard rock are different in local. At high inclination angles, v-shaped notches are approximately perpendicular to the structure plane, and the soft and hard rock bear common loads. Incompatible deformation between the soft rock and hard rock controls the failure process. At inclination angles of 0°, 30° and 90°, incompatible deformations are closely related to rock damage. At 60°, incompatible deformations and rock damage are discordant due that the soft rock and hard rock alternately bears the major loads during the failure process. The failure trend and modes of the numerical results agree very well with those observed in the experimental results. As the inclination angles increase, the proportion of the shear or tensile damage exhibits a nonlinear increase or decrease, suggesting that the inclination angle of mixed strata may promote shear damage and restrain tensile damage.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.8 no.2
• /
• pp.185-196
• /
• 1988

In this study, a method of nonlinear dynamic analysis of suspension bridges subjected to random wind loads is pre.sented. The nonlinearity considered is the one due to the interaction between the motion of the bridge girder and the tertsion variation of the main cables. The equation of motion is formulated using a continuum approach. The coupling between the vertical and torsional motions are included in the analysis. The equation of motion is solved by using the mode superposition method. The analysis is carried out in the frequency domain utilizing the stochastic linearization technique on to the modal equations. In the linearization procedure, the nonlinear terms are approximated as linear ones with constant terms. The verification of the method has been performed on a case with four modal degrees of freedom. Example analyses are carried out on two suspension bridges for various wind speeds and wind force parameters. Numerical results indicate that, by including the nonlinearity into the analysis, the dynamic responses of the bridges, particularly in the vertical direction, change considerably.

• Clinical and Experimental Pediatrics
• /
• v.63 no.9
• /
• pp.368-372
• /
• 2020

Background: Autism spectrum disorder (ASD) is a neurodevelopmental disorder defined by impairments in social interaction and verbal and nonverbal communication. Purpose: Determine the association between use of assisted reproduction technology (ART) and the risk of ASD among children. Methods: This case-control study included 300 participants (100 cases, 200 controls). The control group included women with a child aged 2-10 years without ASD, while the cases were women with a child aged 2-10 years with ASD. We used a researcher-made questionnaire. Data were analyzed using Stata ver. 14 at the 0.05 significance level. Results: In the univariate analysis, there was significant association between child sex, delivery mode, history of preterm delivery, history of using ART, and maternal age at child's birth and the risk of ASD. After the adjustment for other variables, this association was significant for male sex (2.66; 95% confidence interval [CI], 1.11-4.31; P=0.001) and history of using ART (4.03; 95% CI, 1.76-9.21; P=0.001). Therefore, after the adjustment for confounder variables, there was no significant association between ART and the risk of ASD among children (4.98; 95% CI, 0.91-27.30; P=0.065). Conclusion: After the adjustment for other variables, risk factors for ASD were male sex and history preterm delivery. Thus, there was no significant association between ART and the risk of ASD among children.

• Journal of the Korean Society of Visualization
• /
• v.16 no.1
• /
• pp.30-36
• /
• 2018

In the present study, we investigate the flow characteristics of a quadrotor UAV in a hovering mode by measuring multiple two-dimensional velocity fields in the wake. The experiment is conducted at Re = 24,000 in a chamber large enough to neglect the ground effect, where Re is the Reynolds number based on the rotor chord length and the rotor tip speed. The rotational speed of the rotor is determined by an optical tachometer so that the lift force can be balanced with the weight of the UAV. The velocity field measured on the center plane of the rotor shows that the vortices are shedding from the tip of the rotor, inducing large fluctuations in the streamwise velocity along the wake shear layer. The strength of the rotor-tip vortex shedding is asymmetric with respect to the rotor axis due to the interaction between the rotor and the wake centerline of each rotor is inclined to the center of the UAV due to the pressure difference caused by the induced velocity. The wake from each rotor moves closer to each other while traveling in the streamwise direction, and then is merged together inducing large fluctuations in the transverse velocity. Due to the wake merging, on the center plane of the UAV, the velocity increases in the streamwise direction showing two-peak structure in the streamwise velocity contours.

• The Journal of Korean Society of Virology
• /
• v.27 no.1
• /
• pp.69-75
• /
• 1997

To evaluate in vitro anti-HIV efficacies of nucleoside derivatives, MT-4 cell line was infected with HIV-1 and HIV-2 respectively and treated with various compounds and the formerly approved drugs such as AZT, d4T, ddC and ddI. CPE method was used to evaluate their antiviral activity. Most dideoxynucleosides, AZT, d4T, ddC and ddI, showed anti-HIV activities against both viruses but no other compounds including anti-herpesvirus drugs did any. Further experiments were carried out to study their inhibitory mechanism of viral adsorption. The results showed no inhibition of syncytium formation due to an interaction between the gp120 expressed in HIV -infected cell surface and CD4 receptor on the uninfected cell surface in the presence of AZT. AZT showed no activity up to $100\;{\mu}g/ml$. Inhibition of reverse transcriptase (RT) in the presence of AZT-triphosphate was tested by using RT expressed in E. coli and purified and its $IC_{50}$ was 4.5 nM.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.4
• /
• pp.359-366
• /
• 2010

For the application of Lamb wave to structural health monitoring(SHM), understanding its physical characteristic and interaction between Lamb wave and defect of the host structure is an important issue. In this study, reflected, transmitted and mode converted Lamb waves at discontinuity of a plate structure were simulated and the amplitude ratios are calculated theoretically using Modal decomposition method. The predicted results were verified comparing with finite element method(FEM) and experimental results simulating attached PZTs. The result shows that the theoretical prediction is close to the FEM and the experimental verification. Moreover, quantitative estimation method was suggested using amplitude ratio of Lamb wave at discontinuity.

• Anxiety and mood
• /
• v.10 no.1
• /
• pp.44-51
• /
• 2014

Objective : The amygdala has been considered to be a critical region in the pathophysiology of social anxiety disorder, but subregional connectivity pattern has not been examined yet despite lots of previous functional neuroimaging studies. Methods : Resting-state functional magnetic resonance imaging data was obtained in 19 patients with social anxiety disorder and 20 normal controls, and default mode functional connectivity with each of basolateral, centromedial and superficial areas of the amygdala was measured and compared between the two groups. Results : Differential amygdala-based networks between the two groups were distributed to all over the brain. In particular, however, a bias on the amygdala-cingulate pathway was observed in the superficial amygdala only. Connectivity strengths between the superficial amygdala and perigenual anterior cingulate cortex were correlated with scores of social interaction and avoidance. Conclusion : Our findings provide new insights into understanding of the intrinsic cognitive bias model of social anxiety disorder. An abnormality in superficial amygdala-anterior cingulate connectivity may influence on cognitive processing of socially-relevant information in social anxiety disorder.

• Journal of Drive and Control
• /
• v.17 no.3
• /
• pp.33-46
• /
• 2020

We introduce a piece of special-purpose equipment for responding to disasters that has a dual-arm manipulator consisting of six-axis multi joints, and a master-slave operating system controlled by a wearable joystick for intuitive and convenient operation. However, due to the complexity and diversity of a disaster environment, training and suitable training means are needed to improve the interaction between the driver and equipment. Therefore, in this paper, a system that can improve the operator's immersion in the training simulation is proposes, this system is implemented in a virtual environment. The implemented system consists of a cabin installed with the master-slave operation system, a motion platform, visual and sound systems, as well as a real-time simulation device. This whole system was completed by applying various techniques such as a statistical mapping method, inverse kinematics, and a real-time physical model. Then, the implemented system was evaluated from a point of view of the appropriateness of the mapping method, inverse kinematics, the feasibility for real-time simulations of the physical environment through some task mode.

• Journal of the Society of Naval Architects of Korea
• /
• v.32 no.2
• /
• pp.93-102
• /
• 1995

A series of test was performed by measuring the failure strength and the failure mode of fiber reinforced composite laminates joint containing two holes in Series or Parallel. $[0^{\circ}/45^{\circ}/90^{\circ}/-45^{\circ}]_s$ laminate with W/d(Side distance ratio) 4.0 and E/d(Edge distance ratio) 3.0 has the full bearing strength and are preferable in case of the good efficiency in two series hole. Comparisons were made between testing results and predicting values of the FEM model. Good agreements were fecund between them except the case of $E/d=2{\sim}3$. In the case of $G_h{\geq}3.0d$ and $G_v{\geq}3.0d$ since the interaction coefficients between two parallel holes and between two series holes were small, holes can be treated as independent. The Acoustic Emission(AE) and SEM method were utilized to find out the initial defects, damage and the fracture mechanism.