• 제목/요약/키워드: Interaction Point

검색결과 1,080건 처리시간 0.027초

튜브와 지지대 사이의 비선형 충격해설모델 개발에 관한 연구 (A Study on the Development of Tube-to-Support Nonlinear Impact Analysis Model)

  • 김일곤;박진무
    • 소음진동
    • /
    • 제5권4호
    • /
    • pp.515-524
    • /
    • 1995
  • Tubes in heat exchanger of fuel rods in reactor core are supported at intemediate point by support p0lates or springs. Current practice is, in case of heat exchanger, to allow clearance between tube and support plate for design and manufacturing consideration. And in case of fuel rod the clearance in support point can be generated due to the support spring force relaxation. Flow-induced vibration of a tube can cause it to impact or rub against support plate or against adjacent tubes and can result in fretting-wear. The tube-to- support dynamic interaction is used to relate experimental wear data from single-span test rigs to real multi-span heat exchanger configurations. The dynamic interaction cna be measured during experimental wear tests. However, the dynamic interaction is difficult to measure in real heat exchangers and, therefore, analytical techniques are required to estimate this interaction. This paper describels the nonlinear impact model of DAGS(Dynamic Analysis of Gapped Structure) code which simulates the tube response to external sinusodial or step excitation and predicts tube motion and tube-to-support dynamic interaction. Three experimental measurements-two single span rods excited by sinusodial force and a two span rod impacted by a steel ball are compared from the simulation nonlinear model of DAGS code. The simulation results from DAGS code are in good agreement with measurements. Therefore, the developed model of DAGS code is good analytical tool for estimating tube-to-support dynamic interaction in real heat exchangers.

  • PDF

The Impact of Servicescape on Customer Experience Quality through Employee-to-customer Interaction Quality and Peer-to-peer Interaction Quality in Hedonic Service Settings

  • Choi, Beomjoon;Kim, Hyun Sik
    • Asia Marketing Journal
    • /
    • 제17권2호
    • /
    • pp.73-96
    • /
    • 2015
  • This paper investigates how servicescape perception influences customer experience quality in hedonic service settings. In addition to the direct effect of servicescape quality on customer experience quality, the indirect effects of servicescape quality on customer experience quality via employee-to-customer interaction quality and peer-to-peer interaction quality are also investigated. We collected data through a self-administered survey. The proposed relationships were tested using structural equation modeling. The results show that servicescape quality influences customer experience quality both directly and indirectly through employee-to-customer interaction quality and peer-to-peer interaction quality, and customer experience quality influences customer loyalty. Additionally, we find that the indirect path via peer-to-peer interaction quality is significant only in a low-satisfaction customer group. The indirect effect of servicescape quality perception through peer-to-peer interaction quality is significant only in low-satisfaction customer groups. Therefore, if evaluations for this indirect effect fall below an acceptable level, it should be addressed first before improving on other attributes. However, after this point, further improvements offer few if any gains; therefore, service firms should allocate their resources to quality improvements to other factors. This study is the first to investigate the indirect effects of servicescape quality on customer experience quality via peer-to-peer interaction quality in hedonic service settings. Additionally, this study demonstrates that the significance of this indirect effect applies only to a low-satisfaction customer group.

Occurrence mechanism of recent large earthquake ground motions at nuclear power plant sites in Japan under soil-structure interaction

  • Kamagata, Shuichi;Takeqaki, Izuru
    • Earthquakes and Structures
    • /
    • 제4권5호
    • /
    • pp.557-585
    • /
    • 2013
  • The recent huge earthquake ground motion records in Japan result in the reconsideration of seismic design forces for nuclear power stations from the view point of seismological research. In addition, the seismic design force should be defined also from the view point of structural engineering. In this paper it is shown that one of the occurrence mechanisms of such large acceleration in recent seismic records (recorded in or near massive structures and not free-field ground motions) is due to the interaction between a massive building and its surrounding soil which induces amplification of local mode in the surface soil. Furthermore on-site investigation after earthquakes in the nuclear power stations reveals some damages of soil around the building (cracks, settlement and sand boiling). The influence of plastic behavior of soil is investigated in the context of interaction between the structure and the surrounding soil. Moreover the amplification property of the surface soil is investigated from the seismic records of the Suruga-gulf earthquake in 2009 and the 2011 off the Pacific coast of Tohoku earthquake in 2011. Two methods are introduced for the analysis of the non-stationary process of ground motions. It is shown that the non-stationary Fourier spectra can detect the temporal change of frequency contents of ground motions and the displacement profile integrated from its acceleration profile is useful to evaluate the seismic behavior of the building and the surrounding soil.

컨볼루셔널 신경망과 케스케이드 안면 특징점 검출기를 이용한 얼굴의 특징점 분류 (Facial Point Classifier using Convolution Neural Network and Cascade Facial Point Detector)

  • 유제훈;고광은;심귀보
    • 제어로봇시스템학회논문지
    • /
    • 제22권3호
    • /
    • pp.241-246
    • /
    • 2016
  • Nowadays many people have an interest in facial expression and the behavior of people. These are human-robot interaction (HRI) researchers utilize digital image processing, pattern recognition and machine learning for their studies. Facial feature point detector algorithms are very important for face recognition, gaze tracking, expression, and emotion recognition. In this paper, a cascade facial feature point detector is used for finding facial feature points such as the eyes, nose and mouth. However, the detector has difficulty extracting the feature points from several images, because images have different conditions such as size, color, brightness, etc. Therefore, in this paper, we propose an algorithm using a modified cascade facial feature point detector using a convolutional neural network. The structure of the convolution neural network is based on LeNet-5 of Yann LeCun. For input data of the convolutional neural network, outputs from a cascade facial feature point detector that have color and gray images were used. The images were resized to $32{\times}32$. In addition, the gray images were made into the YUV format. The gray and color images are the basis for the convolution neural network. Then, we classified about 1,200 testing images that show subjects. This research found that the proposed method is more accurate than a cascade facial feature point detector, because the algorithm provides modified results from the cascade facial feature point detector.

축류 압축기내의 2차원 유동 특성 (Two-Dimensional Flow Behavior Through a Stage of an Axial Compressor)

  • 홍성훈;백제현
    • 대한기계학회논문집B
    • /
    • 제20권8호
    • /
    • pp.2561-2571
    • /
    • 1996
  • The flow in the turbomachinery is very unsteady due to the stator-rotor interaction. It has been indicated that the stator-rotor interaction has three distinct causes of unsteadiness: that is, the viscous vortex shedding, wake rotor interaction and potential stator-rotor interaction. In this paper, the mechanism of unsteady potential interaction and wake interaction in the stator-rotor stage flow is numerically investigated in two-dimensional view point. The numerical technique used is the upwind scheme of Van Leer's Flux Vector Splitting(FVS) and cubic spline interpolation is applied on zonal interface. Then, the flow field of a compressor stage composed of NACA 65410 is analyzed. Flow fields are found to be simulated reasonably by this method and the sensitivity due to back-pressure variation is more stronger than rotor-velocity variation.

1단 축류 터빈의 비정상 내부유동특성에 관한 2차원 해석 (II) (Two-Dimensional Analysis of Unsteady Flow Through One Stage of Axial Turbine (II))

  • 박준영;엄인식;백제현
    • 대한기계학회논문집B
    • /
    • 제25권11호
    • /
    • pp.1518-1526
    • /
    • 2001
  • In this paper, the mechanism of unsteady potential interaction and wake interaction in one stage axial turbine is numerically investigated at design point in two-dimensional viewpoint. The numerical technique used is the upwind scheme of Van-Leer's Flux Vector Splitting (FVS) and Cubic spline interpolation is applied on zonal interface between stator and rotor. The inviscid analysis is used to embody the influence of potential interaction only and viscous analysis is used to embody the influences of both potential interaction and wake interaction at the same time. The potential-flow disturbance from the stator into a rotor passage and the periodic blockage effect of rotor produce the unsteady pressure on the blade surface in inviscid analysis. After the wake is cut by rotor, two counterrotating votical patterns flanking the wake centerline in the passage are generated. So, these phenomena magnify the unsteady pressure in viscous analysis than that in inviscid analysis. The resulting unsteady forces on the rotor, generated by the combined interaction of the two effects by potential and wake interaction, are discussed.

얼굴의 특이점 검출 및 실시간 추적을 이용한 e-Book 제어 (Unconstrained e-Book Control Program by Detecting Facial Characteristic Point and Tracking in Real-time)

  • 김현우;박주용;이정직;윤영로
    • 대한의용생체공학회:의공학회지
    • /
    • 제35권2호
    • /
    • pp.14-18
    • /
    • 2014
  • This study is about e-Book program based on human-computer interaction(HCI) system for physically handicapped person. By acquiring background knowledge of HCI, we know that if we use vision-based interface we can replace current computer input devices by extracting any characteristic point and tracing it. We decided betweeneyes as a characteristic point by analyzing facial input image using webcam. But because of three-dimensional structure of glasses, the person who is wearing glasses wasn't suitable for tracing between-eyes. So we changed characteristic point to the bridge of the nose after detecting between-eyes. By using this technique, we could trace rotation of head in real-time regardless of glasses. To test this program's usefulness, we conducted an experiment to analyze the test result on actual application. Consequently, we got 96.5% rate of success for controlling e-Book under proper condition by analyzing the test result of 20 subjects.

계산기 사용 환경에서 사회적 상호작용의 역동성 (Characteristic of Dynamic Social Interaction with a Graphing Calculator)

  • 고호경
    • 대한수학교육학회지:수학교육학연구
    • /
    • 제14권3호
    • /
    • pp.327-345
    • /
    • 2004
  • 계산기를 사용한 환경에서 상호작용의 역동적 특징을 다섯 가지 분석도구로 분석하였다. 먼저, 계산기와의 상호작용의 특징을 분석한 결과 자기-조절적 도구로써 사용할 경우 계산기 사용 목적과 가장 잘 부합됨을 알 수 있었으며, 이는 조작의 능숙도와 비춰볼 때 익숙한 조작단계에 이르렀을 때 가능하였다. 사회적 상호작용의 역동성을 먼저, 주도성 진술의 관찰을 통해 계산기와 하위수준의 학생의 자긍심 향상에 관련된 사항을 연구하였으며, 둘째, 대화의 전환점에서 학생들의 상호작용이 적절한 의사소통에서 부적절한 의사소통으로 또한 그 반대의 요인들에 관하여 조사하였다. 셋째, 학생들이 서로의 상호작용이 침체되는 시기에 상호 작용의 효과를 높이기 위하여 효율적인 태도를 취하는 것을 일컬어 구조화라 하였고 각각 이러한 구조화에 미치는 요인들과 마지막으로 스트레스 조절의 진술들을 통하여 적응에의 의지나 수용능력을 증대시키는 인지적, 행동적 노력을 평가하였다.

  • PDF

Function through Defects: Thermodynamic and Kinetics of Point Defects in Ionic Solids

  • Ko, Taegyung;Bang, Gyusuk;Shin, Jungmuk
    • The Korean Journal of Ceramics
    • /
    • 제4권2호
    • /
    • pp.61-67
    • /
    • 1998
  • The significance of point defects as relevant centers concerning electrochemical function is highlighted. Starting from the most simple case of dilute equilibrium bulk defect chemistry, influence of defect interaction and in particular the impact of interfaces on point defect redistribution are considered. Then recent progress in the field of kinetics in bulk and at boundaries is discussed. Finally, selected applications with emphasis on battery and sensor technology are presented.

  • PDF

생성적 적대 신경망 기반 3차원 포인트 클라우드 향상 기법 (3D Point Cloud Enhancement based on Generative Adversarial Network)

  • Moon, HyungDo;Kang, Hoonjong;Jo, Dongsik
    • 한국정보통신학회논문지
    • /
    • 제25권10호
    • /
    • pp.1452-1455
    • /
    • 2021
  • Recently, point clouds are generated by capturing real space in 3D, and it is actively applied and serviced for performances, exhibitions, education, and training. These point cloud data require post-correction work to be used in virtual environments due to errors caused by the capture environment with sensors and cameras. In this paper, we propose an enhancement technique for 3D point cloud data by applying generative adversarial network(GAN). Thus, we performed an approach to regenerate point clouds as an input of GAN. Through our method presented in this paper, point clouds with a lot of noise is configured in the same shape as the real object and environment, enabling precise interaction with the reconstructed content.