• Journal of the Society of Naval Architects of Korea
• /
• v.48 no.4
• /
• pp.308-316
• /
• 2011

Although a yacht sails operate with large displacement due to very thin thickness, many studies for flow around yacht sails have not considered the sail deformation. The sail deformation not only caused a change in the center of effect(CE) on the sail but also a change in the thrust of the sail. The change of the CE and thrust affects the center of lateral resistance(CLR) and side forces of the hull, and the balance of the yacht. These changes affect the motion of the yacht which changes the velocity of the yacht. Thus, when analyzing the flow around yacht sails, the sail deformation should be considered. In the present study, fluid-structure-interaction(FSI) analysis of a two dimensional section of yacht sails was performed to consider the effects of sail deformation on the lift and drag performance. FSI and moving mesh methods were studied. Computational methods were verified using benchmark test cases such as the flow around horizontal and vertical cantilever beams. Shape deformation, pressure distribution, lift forces and separation flow were compared for both rigid and deformable sail.

• Journal of KSNVE
• /
• v.5 no.1
• /
• pp.95-106
• /
• 1995

Flow-induced vibration in heat exchanger (or fuel rod) in nuclar power plant can cause dynamic interactions between tubes and tube supports resulting in fretting-wear. To increase the reliability and design life of heat exchanger components, design criteria that establish acceptable limits of vibration and minimize fretting wear are necessary. The fretting-wear rate is dependent upon material combination, contact configuration, environmental conditions and tube-to tube support dynamic interaction. It is demostrated that the fretting -wear rate correlates well with tube-to-support contact force or work rate. The tube-to-support dynamic interaction, which consists of dynamic contact forces and tube motion, is used to relate single-span wear data to real heat exchanger configurations consisting of multi-span tube bundles. This paper describes the test facility to measure tube-to-support dynamic impact force and reports its dynamic characteristics through the four impact tests - a force transduces independent and external impact tests, central ring inside impact test and additional cylinder impact test. Through the tests the impact parameter change dependent upon the material difference of impacting ball is studied, and the impact parameters of Force Transducer Assembly components are measured. And also the dynamic behavior of Force Transducer Assembly is analyzed. The force measurement technique herein is shown to provide a reasonable measure of dynamic contact forces.

• Structural Engineering and Mechanics
• /
• v.50 no.1
• /
• pp.53-71
• /
• 2014

A semi-analytical method is developed to consider free vibrations of a functionally graded elastic plate resting on Winkler elastic foundation and in contact with a quiescent fluid. Material properties are assumed to be graded distribution along the thickness direction according to a power-law in terms of the volume fractions of the constituents. The fluid is considered to be incompressible and inviscid. In the analysis, the effect of an in-plane force in the plate due to the weight of the fluid is taken into account. By satisfying the compatibility conditions along the interface of fluid and plate, the fluid-structure interaction is taken into account and natural frequencies and mode shapes of the coupled system are acquired by employing energy methods. The results obtained from the present approach are verified by those from a finite element analysis. Besides, the effects of volume fractions of functionally graded materials, Winkler foundation stiffness and in-plane forces on the dynamic of plate are elucidated.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.11 no.1
• /
• pp.154-164
• /
• 2019

A rotor dynamic analysis is mandatory for stability and design optimization of submerged propellers and turbines. An accurate simulation requires a proper consideration of fluid-induced reaction forces. This paper presents a bi-directional coupling of a bond graph method solver and an unsteady vortex lattice method solver where the former is used to model the rotor dynamics of the power train and the latter is used to predict transient hydrodynamic forces. Due to solver coupling, determination of hydrodynamic coefficients is obsolete and added mass effects are considered automatically. Additionally, power grid and structural faults like grid fluctuations, eccentricity or failure could be investigated using the same model. In this research work a fast, time resolved dynamic simulation of the complete power train is conducted. As an example, the rotor dynamics of a tidal stream turbine is investigated under two inflow conditions: I - shear flow, II - shear flow + water waves.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.680-689
• /
• 2011

A dynamic analysis procedure is developed to provide a comprehensive estimation of the dynamic response spectrum for locomotive's wheels running over a Pre-Stressed Concrete (PSC) box girder bridge on the Korea high speed railway. The wheel force spectrum with the bridge behavior are analyzed as the dynamic procedure for various running speeds (50~450km/h). The high-speed railway locomotive (KTX) is used as 38-degree of freedom system. Three displacements(vertical, lateral, and longitudinal) and three rotational components (pitching, rolling, and yawing). For one car-body and two bogies as well as five movements except pitching rotation components for four wheel axes forces are considered in the 38-degree of freedom model. Three dimensional frame element is used to model of the PSC box girder bridges, simply supported span length of 40m. The irregulation of rail-way is derived using the exponential spectrum density function under assumption of twelve level tracks conditions based on the normal probability procedure. The dynamic responses of bridge passing through the railway locomotive with high-speed analyzed by Newmark-${\beta}$ method and Runge-Kutta method are compared and contrasted considering the developed models of bridge, track and locomotive comprehensively. The dynamic analyses of wheel forces by Runge-Kutta method which are able to analyze the forces with high frequency running on the bridge and ground rail-way are conducted. Additionally, wheel forces spectrum and three rotational components of vehicle body for three typical running speeds is also presented.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.14 no.6
• /
• pp.38-44
• /
• 2010

The shock wave and boundary layer interaction patterns in an over-expanded rocket nozzle are associated with the production of undesirable side-forces during the start-up and shut-down processes of the engine. In the present work, a computational study is carried out to investigate the effect of the transient nozzle pressure ratio (NPR) on the flow fields inside the nozzle. The unsteady, compressible, axisymmetric, Navier-Stocks equations with SST k-${\omega}$ turbulence model are solved using a fully implicit finite volume scheme. NPR is varied from 2.0 to 10.0, in order to simulate the start-up and shut-down processes of the rocket engine. It is observed that the interaction patterns and the hysteresis phenomenon strongly depend on the time variation of NPR, leading to significantly different characteristics in the lateral forces.

• Journal of Navigation and Port Research
• /
• v.29 no.8 s.104
• /
• pp.647-652
• /
• 2005

When a vessel passes near a channel boundary, the boundary creates forces and moments acting on the vessel. With the same reason passing of two vessels closely gives same effects to each other. The principal difference between the above two cases is that the channel boundary is long and constant shape compared to those of vessels. The interaction forces and moments between two vessels could be assumed to be functions of the longitudinal distance $chi_0$, transverse distance $y_0$ and speeds of the two vessels. Passage of one vessel close to another is important operationally from the viewpoint of replenishment at sea, avoidance of collisions and passage of two vessels in restricted channels. The authors studied the interactions between two vessels running closely and calculated safe conducting distances according to separated distances and speeds of the two vessels.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.6 no.6
• /
• pp.25-32
• /
• 2002

In the seismic designing of bridges, the pile foundation of bridge piers generally have been modeled to have a fixed end for its convenience and conservative designing. The fixed-end assumption, however, produces very conservative results in terms of the pier forces. Therefore, many other design methods are evolved to consider the flexibility of the pile foundation. In this study, the response spectrum analysis was performed for a bridge pier having a pile foundation. The shear force, moment, and displacement, which occurred at the pier column under an earthquake loading, were compared to analyze the effects of the modeling method, soil condition and the input earthquake response spectrum. In most cases, the fixed-end model gives larger design forces than flexible foundation models. However, when a long period earthquake is applied to the bridge pier on a soft clay foundation, it is found that the flexible foundation models give larger design forces than the fixed-end model. In the end, the reliability of several flexible foundation models was verified by comparing their results with those of a numerical analysis that considers the soil-structure interaction phenomenon in a rigorous manner.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2005.10a
• /
• pp.11-16
• /
• 2005

When a vessel passes near a channel boundary, the boundary creates forces and moments acting on the vessel. With the same reason passing of two vessels closely gives same effects to each other. The principal. difference between the above two cases is that the channel boundary is long and constant shape compared to those of vessels. The interaction forces and moments between two vessels could be assumed to be functions of the longitudinal distance $x_0$, transverse distance $y_0$ and speeds of the two vessels. Passage of one vessel close to another is important operationally from the viewpoint of replenishment at sea, avoidance of collisions and passage of two vessels in restricted channels. The authors studied the interactions between two vessels running closely and calculated safe conducting distances according to separated distances and speeds of the two vessels.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.59 no.4
• /
• pp.336-343
• /
• 2023

The aging fishery training vessels from the past have mostly been decommissioned, and many universities are introducing state-of-the-art large fishery training vessels. The purpose of these training vessels is to train marine professionals and above all, safety to prevent marine accidents should be of utmost priority as many students embark on the vessel. This study estimated the impact of the hydrodynamic interaction forces acting on the model vessel (fishery training vessel) from the bank when the vessel pass near the semi-circle bank wall in various conditions through the numerical calculation, especially concerning maneuvering motions of the vessel. For estimation, variables were mainly set as the size of the semi-circle shape, the lateral distance between the bank and the model vessel, and the depth near the bank. As a result, it was estimated that, in order for the model vessel to safely pass the semi-circle bank wall at a speed of 4 knots, the water depth to the vessel draft ratio should be 1.5 or more (approximately 8 m of water depth), and the lateral distance from the semi-circle bank wall should be 0.4 times the model vessel's length (L_pp) or more (a distance of 34 m or more). Under these conditions, it was expected that the model vessel would pass without significantly being affected by the bank wall.