1. Objectives: Leptin is ob-gene originated hormone that is concerned with energy metabolism, obesity and asthma which features are supposed to related with Sasangin's 4 viscera physiological theory of Sasang constitutional medicine(SCM). This study aims to investigate whether serum leptin concentration is associated with Sasangin. 2. Methods: Two Way ANOVA analysis was used on the constitution and serum leptin concentration corresponding with BMI among 1054 cases drawn from the Constitutional Information Bank, which was a database with clinically confirmed constitution cases collected from 21 oriental medical institutes in Korea starting from November 2007 to May 2009. The measurement of serum leptin concentration is implemented through radioimmunoassay by request to SCL. 3. Results: Male subjects showed notable difference(p=0.033) in the comparison between constitution and serum leptin concentration corresponding to BMI levels. Tae-eumins showed the highest serum leptin concentration levels in the normal and overweight groups, followed by Soyangin and Soeumin. As the groups changed from overweight to obese, there was an interaction phenomenon in the order of serum leptin concentration levels(p=0.040). As a result, Soeumins showed the highest serum leptin concentration levels and Tae-eumins and Soyangins followed in place. Female subjects did not show statistically notable differences in comparison between constitution and serum leptin concentration corresponding to BMI levels(p=0.239). Serum leptin concentration levels among overweight and obese groups, resulted in the order of Soeumins, Tae-eumins, and Soyangins. But in the as groups changed from overweight to normal the order resulted in Tae-eumin, Soyangin, and Soeumin(p=0.660). 4. Conclusion: Due to a number of limitations in this study, the examination of the relation between constitution and leptin, a main hormone responsible for the digestion, appetite, and energy metabolism, resulted to be uncertain. But statistically notable differences were confirmed in male Tae-eumins with the consideration of BMI. Further examination of the relation between constitution and leptin is necessary through prospective studies with the restriction of confusion variables in the future.
Journal of the Computational Structural Engineering Institute of Korea
/
v.29
no.1
/
pp.9-18
/
2016
The slender structures such as high rise building or marine riser are highly susceptible to dynamic force exerted by fluid-structure interactions among which vortex-induced vibration(VIV) is the main cause of dynamic unstability of the structural system. If VIV occurs in natural frequency regime of the structure, fatigue failure likely happens by so-called lock-in phenomenon. This study presents the numerical analysis of dynamic behavior of both structure and fluid in the lock-in regimes and investigates the subjacent phenomena to hold the resonance frequency in spite of the change of flow condition. Unsteady and laminar flow was considered for a two-dimensional circular cylinder which was assumed to move freely in 1 degree of freedom in the direction orthogonal to the uniform inflow. Fluid-structure interaction was implemented by solving both unsteady flow and dynamic motion of the structure sequentially in each time step where the fluid domain was remeshed considering the movement of the body. The results show reasonable agreements with previous studies and reveal characteristic features of the lock-in phenomena. Not only the lift force but also drag force are drastically increasing during the lock-in regime, the vertical displacement of the cylinder reaches up to 20% of the diameter of the cylinder. The correlation analysis between lift and vertical displacement clearly show the dramatic change of the phase difference from in-phase to out-of-phase when the cylinder experiences lock-in. From the results, it can be postulated that the change of phase difference and flow condition is responsible for the resonating behavior of the structure during lock-in.
Journal of the Korean BIBLIA Society for library and Information Science
/
v.23
no.2
/
pp.45-68
/
2012
Archives have directly and indirectly served for memory. What is collected in archives, how it is presented to users, and how users understand and use the documents affects how a given society remembers its past. Some archival scholars see that how users interpret documents from their perspectives and by social interests may play a central role in constructing social memory because memories are often triggered by individual and social concerns of the present time. Therefore, knowing what causes users to seek for a certain materials, how they use those materials and why can offer a clue to learn how archives serve for social memory. In the Web space, the interaction between users and archives/archival materials can be easily observed. Beyond making access simple for users and promoting archival documents using Web technology, archives can serve the broader purpose of memory by skillfully exploiting the characteristics of Web 2.0 and digital cultures in a way to observe how users engage in and contribute to archival contents available on the Web. This study examines the discourses on memory in the archival context, and in particular, how archives can serve as platforms for memory within the new environment of Web 2.0 technologies. It surveys discussions on memory in relation to archives, history, and evidence, focusing on the user and use context as it is represented in the archival literature. This paper discusses how that technology provides features that allow us to see collective memory being constructed in the archives, and presents examples of how the Web 2.0 technology can structure the way users share their memories in building a larger narrative around the archive.
This paper presents a unified framework to efficiently and realistically simulate surface and wave foams. The framework is designed to first project 3D water particles from an underlying water solver onto 2D screen space in order to reduce the computational complexity of determining where foam particles should be generated. Because foam effects are often created primarily in fast and complicated water flows, we analyze the acceleration and curvature values to identify the areas exhibiting such flow patterns. Foam particles are emitted from the identified areas in 3D space, and each foam particle is advected according to its type, which is classified on the basis of velocity, thereby capturing the essential characteristics of foam wave motions. We improve the realism of the resulting foam by classifying it into two types: surface foam and wave foam. Wave foam is characterized by the sharp wave patterns of torrential flow s, and surface foam is characterized by a cloudy foam shape even in water with reduced motion. Based on these features, we propose a technique to correct the velocity and position of a foam particle. In addition, we propose a kernel technique using the screen space density to efficiently reduce redundant foam particles, resulting in improved overall memory efficiency without loss of visual detail in terms of foam effects. Experiments convincingly demonstrate that the proposed approach is efficient and easy to use while delivering high-quality results.
Kim, Dong Won;Park, Sang Rae;Umemura Junjo;Takeda Satoshi;Hasegawa Takeshi;Takenaka Tohru;Lee Hai Won
Journal of the Korean Chemical Society
/
v.37
no.6
/
pp.570-576
/
1993
1-, 3-, 9-, and 21-Monolayer Langmuir-Blodgett(LB) films of stearic acid were deposited on silver-coated glass slides at the surface pressure of 30 mN/m. Fourier transform infrared(FTIR) reflection-absorption spectra (RAS) of these LB films were recorded at various temperatures from 31 to $72^{\circ}C.$ The spectra at $31^{\circ}C$ exhibited characteristic features of highly perpendicular orientation of the hydrocarbon chain. In the 1-monolayer LB film, the C=O stretching band was not observed, presumably due to the image dipole effect on the silver surface. In the 1-and 3-monolayer LB films, the trans isomer of stearic acid was prominent, but the cis isomer was dominant in the 21-monolayer LB film. FTIR-RAS measurements at an elevated temperature indicated that the chain melting temperature increases and approached to the bulk melting point with increasing the number of monolayer, except for the 1-monolayer LB film which has a higher melting temperature than the 3-monolayer film due to the strong interaction with the silver substrate.
The purpose of this study is to find the meaning of the good class, and based on this, situation of environmental education in high school is researched. Through those above processes, desirable direction of the environment class is suggested. For this study, we are trying to reflect the characteristics of environmental education on the general good classes, and from this, the meaning of good environment class is known. Moreover, for this study, we choose environment classes from four high schools leading by environment major teacher. From those four classes, we analyzed these things: educational situation of environment class, teachers' interviews. All of these are for analyzing environment class with the view of good environmental class. A well-formed environment class manifests the features of environment education in all aspects of teaching and learning process, including learning objectives, learning materials, procedures, and evaluations. Furthermore, it should be 'student-centered' class in which active interaction among the learners or between the instructor and the students is considered most important. Students are not the passive receiver, but rather, they actively participate in the learning process by reorganizing the knowledge as they experience and become independent learners who are actively involved in the problem-solving process. In this way, we can generate a great deal of students' interest and motivation, which in turn makes the class interesting, enjoyable, full of energy and still effective. If there is the class reflecting the factors of environmental education above good class' ways, it will be the good environment class. In the current situation of environment class, the rate of student's class participation and study activity was low. This tendency is not too different between four groups except students' support to teachers. This result means that learners' will to participate in their classes actively is not high. Moreover, about 46.3% of students did not understand some parts of new knowledge and about the parts, students' solution was 'does nothing' and the rate was also so high. Teachers tried to make their class with considering students' interest, and focusing their learner's real life. However, learners are all general education high school students, so teachers have aversion about making their students heavy activities.
Guenot-Delahaie, Isabelle;Sercombe, Jerome;Helfer, Thomas;Goldbronn, Patrick;Federici, Eric;Jolu, Thomas Le;Parrot, Aurore;Delafoy, Christine;Bernaudat, Christian
Nuclear Engineering and Technology
/
v.50
no.2
/
pp.268-279
/
2018
The ALCYONE multidimensional fuel performance code codeveloped by the CEA, EDF, and AREVA NP within the PLEIADES software environment models the behavior of fuel rods during irradiation in commercial pressurized water reactors (PWRs), power ramps in experimental reactors, or accidental conditions such as loss of coolant accidents or reactivity-initiated accidents (RIAs). As regards the latter case of transient in particular, ALCYONE is intended to predictively simulate the response of a fuel rod by taking account of mechanisms in a way that models the physics as closely as possible, encompassing all possible stages of the transient as well as various fuel/cladding material types and irradiation conditions of interest. On the way to complying with these objectives, ALCYONE development and validation shall include tests on $PWR-UO_2$ fuel rods with advanced claddings such as M5(R) under "low pressure-low temperature" or "high pressure-high temperature" water coolant conditions. This article first presents ALCYONE V1.4 RIA-related features and modeling. It especially focuses on recent developments dedicated on the one hand to nonsteady water heat and mass transport and on the other hand to the modeling of grain boundary cracking-induced fission gas release and swelling. This article then compares some simulations of RIA transients performed on $UO_2$-M5(R) fuel rods in flowing sodium or stagnant water coolant conditions to the relevant experimental results gained from tests performed in either the French CABRI or the Japanese NSRR nuclear transient reactor facilities. It shows in particular to what extent ALCYONE-starting from base irradiation conditions it itself computes-is currently able to handle both the first stage of the transient, namely the pellet-cladding mechanical interaction phase, and the second stage of the transient, should a boiling crisis occur. Areas of improvement are finally discussed with a view to simulating and analyzing further tests to be performed under prototypical PWR conditions within the CABRI International Program. M5(R) is a trademark or a registered trademark of AREVA NP in the USA or other countries.
효과적인 ATM 망의 관리는 연결 지향 환경, 다양한 서비스 등급, 대규모 트래픽, 가상 망 구성 그리고 여러가지 트래픽 유형 등과 같은 다양한 ATM 특성을 다룰 수 있어야만 한다. 이를 위해 ATM 포럼에서는 ATM 장치, 사설망, 공중망 및 그들간의 상호작용을 지원하기 위한 ATM 망 관리 참조 모델을 정의하였으며, 그 중 하나가 서로 다른 판매자로부터의 ATM 장비들간의 상호동작성을 보장하기 위해 SNMP 기반 망 관리 프로토콜을 통해 상호 연결된 인터페이스를 관리할 수 있도록 정의된 통합 지역 관리 인터페이스(ILMI) 프로토콜이다. ILMI의 목적은 두 인접한 ATM 장치로 하여금 그들 간에 공통의 ATM 링크에 대한 동작 파라메타를 자동적으로 구성할 수 있도록 함으로서, 관리자에 의해 수동 구성이 아닌 ATM 장치 상호간의 플러그 앤 플러그 기능을 지원하는데 있다. 본 논문에서는 이러한 ILMI 기술을 바탕으로 공중망 ATM 교환기에 연결된 가입자의 물리 인터페이스, ATM 계층 인터페이스, VPC 및 VCC의 구성 및 상태 정보를 효율적으로 관리하며, 가입자 시스템의 ATM 주소를 자동으로 등록, 관리할 수 있도록 하는 가입자 인터페이스 관리 시스템(SIMS)을 설계하고, 구현하였다. Abstract An effective ATM management must address the various features of ATM such as connection-oriented environment, varying class of service, large scale traffic, virtual network configurations and, and multiple traffic types. For this, ATM network management reference model defined by ATM Forum describes the various types of network management needed to support ATM devices, private networks, public networks, and the interaction between them. One of these types is Integrated Local Management Interface (ILMI) defined to manage interconnected interface through SNMP-based network management protocol for ensuring the interoperability of ATM devices from different vendors. The purpose of ILMI is to enable two adjacent ATM devices to automatically configure the operation parameters of the common ATM link between them and then to provide a Plug and Plug function to any ATM devices with not a passive configuration by manager but a automatic configuration. This paper design and implement a Subscriber Interface Management System (SIMS) which provide automatic registration and management of ATM address of subscriber system and efficiently manages physical interface of subscriber who is connected to public ATM switch, ATM layer interface, configuration information and status information of VPC and VCC.
The characteristics of the Asian summer monsoon have been investigated for the periods of 1993/1994, the contrasting years in a view of the summer monsoon precipitation. In order to investigate the monsoon features over the eastern Asian monsoon region, the cloudiness(using the extensive data derived by the geostationary meteorological satellite), the condition of underlying surface including sea-surface temperature, and the summer rainfall are analyzed and some comparisons with 1993 and 1994 are also made and the characteristic differences are discussed. An analysis of the 2-degree latitude-longitude gridded 5-day mean high cloud amount data shows the detailed movement and persistence of the convective activities. In order to describe the spatial and temporal structures of the intraseasonal oscillation for the movement and evolution of the monsoon cloud, the extended empirical orthogonal fnction analysis with the twenty-day window size is used for the each year. Also, in order to find out the periodicity of the equatorial convective cluster, Fourier harmonic analysis is applied to the each year. The most prevailing intraseasonal oscillations of high cloud amount are 61 day mode and 15day mode in the equatorial and the subtropical oceans. However it was found that the most prevailing modes over the equatorial western Pacific and Indian Ocean were different for each year, hence raising the possibillity that the contrasting monsoon presipitation may be more fundamentally related to the interaction of intraseasonal oscillations and seasonal variation of convective activities over the lower latitude ocean.
Journal of Korean Tunnelling and Underground Space Association
/
v.20
no.6
/
pp.1003-1022
/
2018
In the current work, a series of three-dimensional finite element analyses were carried out to understand the behaviour of a pre-existing single pile to the changes of the tunnel face pressures when a shield TBM tunnel passes underneath the pile. The numerical modelling analysed the results by considering various face pressures (25~100% of the in-situ horizontal stress prior to tunnelling at the tunnel springline). In the numerical modelling, several key issues, such as the pile settlements, the axial pile forces, the shear stresses have been thoroughly analysed for different face pressures. The head settlements of the pile with the maximum face pressure decreased by about 44% compared to corresponding settlement with the minimum face pressure. Furthermore, the maximum axial force of the pile developed with the minimum face pressure. The tunnelling-induced axial pile force at the minimum face pressure was found to be about 21% larger than that with the maximum face pressure. It has been found that the ground settlements and the pile settlements are heavily affected by the face pressures. In addition, the influence of the piles and the ground was analysed by considering characteristics of the soil deformations. Also, the apparent safety factor of the piles are substantially reduced for all the analyses conducted in the current simulation, resulting in severe effects on the adjacent piles. Therefore, the behaviour of the piles, according to change the face pressures, has been extensively examined and analysed by considering the key features in great details.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.