• Title/Summary/Keyword: Inter Granular Fracture

검색결과 5건 처리시간 0.015초

고온의 인공해수 중 12Cr강의 부식피로특성에 관한 연구 (Corrosive Characterisics of 12Cr Alloy Steel and Fatigue Characteristics of the Artificially Degraded 12Cr Alloy Steel)

  • 조선영;김철한;배동호
    • 대한기계학회논문집A
    • /
    • 제25권5호
    • /
    • pp.772-778
    • /
    • 2001
  • In this study, corrosion fatigue characteristics of 12Cr alloy steel were investigated in 3.5wt.% NaCl solution of 150$^{\circ}C$ and 4.5bar. Behavior of corrosion fatigue cracks was measured by the indirect compliance method and compared with the results in distilled water and in air. 1) 12Cr alloy steel was susceptible to temperature. Its susceptibility was increased as the temperature was increased. 2) The crack growth characteristics of 12Cr alloy steel in distilled water were similar to 3.5wt.% NaCl solution. 3) The temperature of solution affects to the crack growth characteristics of 12Cr alloy steel. In corrosion solutions of 4.5bar, 150$^{\circ}C$, fracture surfaces of corrosion fatigue crack growth at a/W=0.3 was showed the trans-granular fracture suface. As the crack grew up, it was changed to inter-granular type. In condition of high temperature, The crack growth behaviors of 12Cr alloy steel were remarkable.

항공기엔진용 1단계 터빈블레이드에 대한 파손 연구 (The Study for Fracture in the First Stage Blade of Aircraft Engine)

  • 윤영웅;박형규;김정
    • 한국항공우주학회지
    • /
    • 제46권10호
    • /
    • pp.806-813
    • /
    • 2018
  • 항공기 엔진을 구성하는 부품 중 하나인 블레이드의 파손에 대해 분석하였다. 블레이드의 파손원인과 그 거동은 다양하지만 크게 일시파단과 피로파손의 두가지 형태로 나뉘어진다. 이 논문에서는 전체 거동은 일시파단으로 진행되고 일부 피로 파손된 블레이드에 대해 기술하였고, 특히 고온에서의 블레이드 손상거동을 분석하므로써 사례의 하나로 제시하고자 한다. 분석한 블레이드는 니켈기 초내열 합금으로 외관, 재질, 미세조직, 고온 크리프 특성, 파단면 형상을 각각의 분석장비를 활용하여 손상원인과 거동을 확인하였고, 원재질에서 재현하였다. 고온에서 니켈 합금은 ${\gamma}^{\prime}$ 형상이 변형되고 조직변형(Alloy Depletion)구간이 관찰되며 재질의 기계적 성질, 물성치 등이 저하되고 연화되어 장시간 운용 시 파손될 수 있다. 니켈합금은 고온특성이 좋으나 함유되는 미량원소에 따라 그 물성치가 다양하므로 니켈합금이라 하여도 그 목적에 맞는 세분화된 소재를 사용해야한다.

니켈 합금 모재 및 용접재의 일차수응력부식균열 균열성장속도 시험 (Primary Water Stress Corrosion Crack Growth Rate Tests for Base Metal and Weld of Ni-Cr-Fe Alloy)

  • 이종훈
    • Corrosion Science and Technology
    • /
    • 제18권1호
    • /
    • pp.33-38
    • /
    • 2019
  • Alloy 600/182 with excellent mechanical/chemical properties have been utilized for nuclear power plants. Although both alloys are known to have superior corrosion resistance, stress corrosion cracking failure has been an issue in primary water environment of nuclear power plants. Therefore, primary water stress corrosion crack (PWSCC) growth rate tests were conducted to investigate crack growth properties of Alloy 600/182. To investigate PWSCC growth rate, test facilities including water chemistry loop, autoclave, and loading system were constructed. In PWSCC crack growth rate tests, half compact-tension specimens were manufactured. These specimens were then placed inside of the autoclave connected to the loop to provide primary water environment. Tested conditions were set at temperature of $360^{\circ}C$ and pressure of 20MPa. Real time crack growth rates of specimens inside the autoclave were measured by Direct Current potential drop (DCPD) method. To confirm inter-granular (IG) crack as a characteristic of PWSCC, fracture surfaces of tested specimens were observed by SEM. Finally, crack growth rate was derived in a specific stress intensity factor (K) range and similarity with overseas database was identified.

The fractal analysis of the fracture surface of concretes made from different coarse aggregates

  • Prokopski, Grzegorz;Konkol, Janusz
    • Computers and Concrete
    • /
    • 제2권3호
    • /
    • pp.239-248
    • /
    • 2005
  • The article presents the results of examination of the fractal dimension D of concrete specimen fracture surfaces obtained in fracture toughness tests. The concretes were made from three different types of coarse aggregate: gravel, dolomite and basalt aggregate. Ordinary concretes (C40) and high-performance concretes (HPC) were subjected to testing after 7, 14, 28 and 90 days of curing, respectively. In fracture toughness and compressive tests, different behaviours of concretes were found, depending on the type of aggregate and class of concrete (C40, HPC). A significant increase in the strength parameters tested occurred also after a period of 28 days (up to the $90^{th}$ day of curing) and was particularly large for concretes C40. Fractal examinations performed on fracture replicas showed that the fractal dimension D was diverse, depending on the coarse aggregate type and concrete class being, however, statistically constant after 7 and 14 days for respective concretes during curing. The fractal dimension D was the greater, the worse strength properties were possessed by the concrete. A cross-grain crack propagation occurred in that case, due to weak cohesion forces at the coarse aggregate/mortar interface. A similar effect was observed for C40 and HPC made from the same aggregate. A greater dimension D was exhibited by concretes C40, in which case the fracture was easier to form compared with high-performance concretes, where, as a result of high aggregate/mortar cohesion forces, the crack propagation was of inter-granular type, and the resulted fracture was flatter.

고온수중에서 STS 304 스테인리스강의 응력부식균열 성장속도 (Stress Corrosion Crack Rate of STS 304 Stainless Steel in High Temperature Water)

  • 김정기
    • 대한기계학회논문집A
    • /
    • 제24권1호
    • /
    • pp.156-162
    • /
    • 2000
  • Sensitized STS 304 stainless steel crack growth rate(CGR) in high temperature water was investigated under trapezoidal wave loading test using fracture mechanics techniques. The CGR, due to stress corrosion cracking(SCC), were systematically measured as a function of the stress intensity factor and stress. holding time under trapezoidal wave loading. In high temperature water, CGR was enhanced by a synergistic effects in combination with an aggressive environment and mechanical damage. The CGR, $(da/dN)_{env}$ was basically described as a summation of the environmentally assisted crack growth rate $(da/dN)_{SCC}$, $(da/dN)_{CF}$ and fatigue crack growth rate in air $(da/dN)air,. The CGR, $(da/dN)_{env}$, increased linearly with increasing stress holding time. The CGR, $(da/dN)_{SCC}$ decreased linearly with increasing stress holding time. Fracture surface mode varied from trans-granular cracking to inter-granular cracking with increasing stress holding time.