• 한국정보통신학회논문지
• /
• 제8권3호
• /
• pp.721-726
• /
• 2004

영상의 이진화는 문자 인식, 영상 분석 등 다양한 영상 처리 분야의 전처리 과정으로 자주 적용되고 있다. 영상 이진화는 임계치의 설정에 따라 처리 성능이 좌우되며, 대부분의 기존 이진화 방법은 밝기 값의 히스토그램을 사용하여 평균 밝기 값이나 히스토그램의 골짜기를 임계치로 설정한다. 이와 같은 방법은 양봉의 특징을 보이지 않거나 특정 영상을 추출하려는 경우에는 적절한 임계치를 얻기 어렵다. 따라서 본 논문에서는 그레이 스케일 영상에서 밝기 값을 여러 구간으로 분할하여 각 구간의 밝기 평균값을 구하고, 두 개의 구간에 대해 평균값 사이의 거리를 각 구간에서 평균값과 양극과의 거리 비율로 나누어서 계산된 값을 두 개의 구간을 합친 새로운 구간의 임계치로 설정한다. 최종적으로 하나의 구간이 생성될 때까지 구간 통합과 임계값 계산을 반복함으로써 이진화 임계값을 산출한다. 제안된 이진화 방법의 성능을 평가하기 위하여 다양한 종류의 영상에 적용한 결과, 기존의 이진화 방법들보다 효율적인 것을 확인하였다.

• 전기의세계
• /
• 제26권4호
• /
• pp.61-67
• /
• 1977

This paper treats the Ultrasonic effects on the break down characteristics of Liquid Dielectric Material 1) Relative Dielectric constant, Es of Liquid Dielectric Material at a constant temperature decreases in proportion to the irradiated time of Ultrasonic radiation and its intensity, and reaches to a certain saturated value. The saturated value varies with the intensity of Ultrasonic radiation. 2) Power factor of Liquid Dielectric Material at a constant temperature increases in proportion tothe irradiated time of Ultrasonic radiation and its intensity, and reaches to a certain saturated value. The saturated value varies with the intensity of Ultrasonic radiation. 3) Relative resistance of Liquid Dielectric Material at a constant temperature decrease with the irradiated time of Ultrasonic radiation, but the effect of its intensity is very irregular. 4) Break-down strength of Liquid Dielectric Material, at a constant temperature decreases with the irradiated time of Ultrasonic radiation and its intensity, and then reaches to a saturated value.

• 상하수도학회지
• /
• 제36권4호
• /
• pp.229-237
• /
• 2022

The sewer capacity design have been based on the Huff model or the rational equation in South Korea and often failed to determine optimal capacity, resulting in frequent urban flooding or over-sizing. A time distribution of rainfall (i.e., Huff or ABM method) could be used instead of a rainfall hyetograph obtained from statistical analysis of previous rainfalls. In this study, the Huff method and the ABM method, which predict the time distribution of rain intensity, which are widely used to calculate sewage pipe drainage capacity using the SWMM, were compared with the standard rainfall intensity hyetograph of Seoul. If the rainfall duration was 30 minutes to 180 minutes, the rainfall intensity value calculated by the Huff model tended to be less than the rainfall intensity value of the standard rainfall intensity in the initial 5-10 minutes. As a result, more than 10% to 30% of under-design would be made. In addition, the rainfall intensity value calculated by the Huff model from the section excluding the initial 5-10 minutes of rainfall to the rainfall duration was calculated larger than the value using the standard rainfall intensity equation, which would result in an over-design of 10% to 30%. In the case of a relatively long rainfall duration of 360 minutes (6 hours) to 1,440 minutes (24 hours), it showed an lower rainfall intensity of 60 to 90% in the early stages of rainfall, but the problem of under-design had been solved as the rainfall duration time had elapsed. On the other hand, in the alternating block method (ABM) method, it was found that the rainfall intensity at the entire period at each assumed rainfall duration accurately matched the standard rainfall intensity hyetograph of Seoul.

• 한국농공학회지
• /
• 제38권2호
• /
• pp.108-122
• /
• 1996

This study was to introduced estimation model for optimum probabilistic rainfall intensity on hydrological area. Originally, probabilistic rainfall intensity formula have been characterized different coefficient of formula and model following watersheds. But recently in korea rainfall intensity formula does not use unionize applyment standard between administration and district. And mingle use planning formula with not assumption model. Following the number of year hydrological duration adjust areal index. But, with adjusting formula applyment was without systematic conduct. This study perceive the point as following : 1) Use method of excess probability of Iwai to calculate survey rainfall intensity value. 2) And, use method of least squares to calculate areal coefficient for a unit of 157 rain gauge station. And, use areal coefficient was introduced new probabilistic rainfall intensity formula for each rain gauge station. 3) And, use new probabilistic rainfall intensity formula to adjust a unit of fourteen duration-a unit of fifteen year probabilistic rainfall intensity. 4) The above survey value compared with adjustment value. And use three theory of error(absolute mean error, squares mean error, relative error ratio) to choice optimum probabilistic rainfall intensity formula for a unit of 157 rain gauge station.

• 국제지역연구
• /
• 제14권3호
• /
• pp.312-338
• /
• 2010

기업의 광고선전활동은 매출의 상승, 충성고객의 확보, 진입장벽 구축 등의 효익을 제공한다. 그러나 광고선전활동과 기업가치 간의 관련성에 대한 많은 실증연구들은 일관된 결과를 제시하지 못하고 있는 실정이다. 이에 본 연구는 2001년 1월 1일부터 2009년 12월 31일까지 한국 유가증권시장과 코스닥시장에 계속 상장된 제조업 영위 기업을 대상으로 기업의 광고선전활동과 기업가치 간의 관련성을 살펴보았다. 또한 이 들 간의 관계에 있어 연구개발집약도 및 수출비중의 조절효과를 살펴보았다. 주요 실증분석결과는 다음과 같다. 첫째, 광고선전활동의 대용변수인 광고선전집약도의 계수는 1% 수준에서 양(+)으로 유의하였다. 광고선전활동이 증가할수록 기업가치가 상승하였다. 둘째, 전체표본을 고 및 저 연구개발집약도 표본(고 및 저 수출비중 표본)으로 각각 분리하여 분석한 결과, 광고선전집약도의 계수값은 저 연구개발집약도 표본(고 수출비중 표본)이 고 연구개발집약도 표본(저 수출비중 표본)에 비해 컸다. 연구개발집약도(수출비중)에 의해 광고선전활동과 기업가치 간의 관계가 조절됨을 알 수 있었다.

• 한국기계가공학회지
• /
• 제16권2호
• /
• pp.44-49
• /
• 2017

In this study, the cutting conditions of moving speed, number of main axial revolutions, etc. are changed for the chrome molybdenum steel (SCM415) material and carbide ball end mill tool to study the changes for processing intensity in the cutting process. The results that confirm the intensity of the measured value of the specimen for SCM415 display the intensity with an average 1.0667 HrC. After the fact cutter, it was able to confirm the average intensity of 8.3815 HrC. In addition, the intensity value after image processing may determine the average intensity survey value of 5.8690 HrC and the different intensity values with image processing after face cutting are shown for an average of ${\pm}2.5125HrC$. The different value of intensity with the specimen and image processing is confirmed for an average of 4.8024 HrC. The results of comparing the intensity following the number of main axial revolutions and moving speed show that the intensity is highest for 3,000 rpm and F200, and lowest for 4,000 rpm and F200.

• 한국초지조사료학회지
• /
• 제16권1호
• /
• pp.53-60
• /
• 1996

A field experiment was carried out to determine the effects of grazing stage and intensity on the forage production and nutritive value in orchardgrass dominant pasture, 1989 and 1990. The grazing stages were 20- 25m, 30-35cm and 40-45cm of plant height, and high and medium grazing intensity were set by the number of growing cows (initial body weight: 230-250kg), which was adJusted according to the pasture production. The high level of grazing intensity was 150% of medium intensity. Annual grazing frequency was 10 times in 20-25cm. 8 times in 30-35cm. and 6 times in 40-45cm of plant height. Dry matter(DM) yield was increased with increasing of plant height at grazing : 7,090kg in 20-25cm 7,882kg in 30-35n and 8,260 kgha in 40-45cm of height. Higher DM was observed at medium grazing intensity. In spring, daily DM production was more vigorous than those in summer and autumn season. Cmde protein (CP), digestible DM, and DM intake were decreased with increasing of plant height at grazing. CP content was 25.8% in 20-25cm 22.4% in 30-35m and 19.2% in 40-45cm, while the contents of neutral detergent fiber and acid detergent fiber were increased with higher plant height. Relative feed value was 11 1.2 in 20-25cm, 104.4 in 30-35n and 99.6 in 40-45cm. Also nutritive value of pre-grazing pasture plants was remarkably higher than that of post-grazing, and not significant differences of nutritive value were found between grazing intensity. From the above mults, it may be concluded that optimum plant height for grazing was 20-25cm and 30- 35cm in pasture mixtures dominated by orchardgms, and medium grazing intensity was very desirable for pasture productivity.

• Food Science and Biotechnology
• /
• 제15권3호
• /
• pp.374-379
• /
• 2006

This study was carried out to investigate the physicochemical properties of frozen pork muscle which has been thawed using the ohmic thawing process, and to establish the optimal ohmic power intensity. The samples were frozen at $-40^{\circ}C$ and thawed at 0, 10, 20, 30, and 40 V by ohmic thawing. Increasing ohmic power intensity correlated with increased thawing rates. The relationship between ohmic power intensity and thawing rate can be represented as a polynomial function. The pH value decreased with increasing ohmic power intensity (p<0.05). With regard to color measurement, the $L^*$, a, and b values of thawing at all ohmic power intensities were not significantly different. The water holding capacity showed a peak value of 41.62% with an ohmic thawing intensity of 30 V. Cooking losses were lowest at the lowest ohmic thawing intensity of 10 V. Thiobarbituric acid reactive substance (TBARS) levels with all thawing processes were slightly higher than that of the control (p<0.05). Increasing ohmic power intensity did not tend to change the total volatile basic nitrogen (TVBN) value.

• Journal of Korea Trade
• /
• 제25권6호
• /
• pp.126-142
• /
• 2021

Purpose - This study discusses the effects of human capital in the formation of GVC linkages. We also investigate GVC intensity between Korea and ASEAN. Design/methodology - To solve the doubling-counting problem in evaluating comparative advantage, RCA has been re-computed using domestic value-added (henceforth RCA_VA) at the country-sector level instead of value of trade. The impact of human capital on GVC intensity was empirically analyzed by establishing a panel data set with four industries (ISIC Rev. 4) in eight ASEAN countries from 2005 to 2015 from OECD-TiVA and WDI. Findings - The empirical results show that human capital has a negative effect on GVC intensity in the agriculture and manufacture industries, while it has a positive effect in the service and information industries. The results do not mean that low human capital is a barrier and inefficient to GVC linkages. Low Value-added activities may be more profitable to some emerging countries. These findings suggest that it is important to accurately identify the competitive elements to increase gains from trade under the GVC. Also, it shows that comparative advantages can be misled by an RCA index evaluated in trade volume under the GVC. Originality/value - This study highlights the importance of human capital as a factor for the efficient formation of Global Value Chain (GVC). This study has different from the literature in analyzing the role of human capital in formation of linkage of the GVC. And we clarify the changing patterns of trade by removing the double-counting problem under the GVC.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.371-374
• /
• 2006

The objective of this study is to determine the influence of free-stream turbulent intensity on the three-dimensional turbulent flow in a linear turbine cascade. The range of free-stream turbulence intensity considered is 0.7~10%. This study was performed numerically. The results show that the mass averaged loss coefficient increased according to the increase of free-stream turbulence intensity due to increased value of the mass averaged total pressure loss coefficient which was higher than the decreased value of the mass averaged secondary flow loss coefficient. The loss coefficient distribution was changed suddenly at a free-stream turbulence intensity of 10% while the loss coefficient distribution was rarely changed at a lower free-stream turbulence intensity of 5%.