• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.525-528
• /
• 2002

The objective of this study is to investigate characteristics of flow by the Rod shape and the choice of the turbulent intensity enhancement section. The Rod was setup vertically to the way of a nozzle exit flow and nozzle diameter is 17mm. Rod height is 5mm and its shapes are square, triangle, and circle. Characteristics of fluid such as velocity vector distribution, kinetic energy, turbulent intensity, and etc. were visualized, observed, and considered at 3 kinds of Re No. such as 2000, 3000, and 4000. The characteristics of flow field were investigated in each case of the distance rate from the nozzle exit to impinging plate(H/B=8, 10). The temperature of water is $20^{\circ}E$ and the measurement region divided by 3 sections(I, II, III). The nozzle diameter is 17mm. As the experimental result by PIV measurement, scale of the vector profile showed a tendency to an unbalance parabola distribution as increasing of the Re No. When the impinging plates such as square, triangle, and circle shape are installed respectively in front of the flow accelerated, rod shape of the highest velocity vector is circle shape and rod shape of the highest turbulent Intensity is square shape.

• 한국수자원학회논문집
• /
• 제32권3호
• /
• pp.247-254
• /
• 1999

우리 나라 주요 우량관측소 22개 지점의 매년 최대치 강우자료에 대하여 빈도해석을 실시하였다. 매개변수 추정방법은 모멘트법, 확률가중 모멘트법, 최우도법 등이며, 매개변수 적합성, 도시적 해석, 분리효과, 적합도 검정결과 GEV 분포가 우리 나라 강우자료에 대하여 가장 적합한 확률분포형으로 나타났다. 선정된 GEV 분포형을 모집단의 확률분포형으로 가정하여 재현기간별 확률강우량을 산정하므로써 지역적 해석을 실시하였으며, 정확도 있는 선형화 기법을 통해 회귀분석을 실시하여 확률강두강도식을 유도하였다. 본 연구에서 유도된 확률강우강도식은 실무차원에서 임의 지속기간의 재현기간별 확률강우량을 간편하게 구할 수 있을 것으로 판단된다.

• Journal of Information Technology Applications and Management
• /
• 제25권2호
• /
• pp.109-116
• /
• 2018

In this study, we was compared the reliability performance of the software reliability model, which applied the Goel-Okumoto model developed using the exponential distribution, to the logarithmic function modifying the intensity function and the Rayleigh form. As a result, the log-type model is relatively smaller in the mean squared error compared to the Rayleigh model and the Goel-Okumoto model. The logarithmic model is more efficient because of the determination coefficient is relatively higher than the Goel-Okumoto model. The estimated determination coefficient of the proposed model was estimated to be more than 80% which is a useful model in the field of software reliability. Reliability has been shown to be relatively higher in the log-type model than the Rayleigh model and the Goel-Okumoto model as the mission time has elapsed. Through this study, software designer and users can identify the software failure characteristics using mean square error, decision coefficient. The confidence interval can be used as a basic guideline when applying the intensity function that reflects the characteristics of the lifetime distribution.

• 천문학회보
• /
• 제44권1호
• /
• pp.56.3-56.3
• /
• 2019

We are currently living in the era of the wide field cosmological surveys, either spectroscopic such as Dark Energy Spectrograph Instrument or photometric such as the Dark Energy Survey or the Large Synoptic Survey Telescope. By analyzing the distribution of matter clustering, we can use the growth of structure, in combination with measurements of the expansion of the Universe, to understand dark energy or to test different models of gravity. But we also live in the era of multi-tracer or multi-messenger astrophysics. In particular, during the next decades radio surveys will map the matter distribution at higher redshifts. Like in optical surveys, there are radio imaging surveys such as continuum radio surveys such as the ongoing EMU or spectroscopic by measuring the hydrogen 21cm line. However, we can also use intensity mapping as a low resolution spectroscopic technique in which we use the intensity given by the emission from neutral hydrogen from patches of the sky, at different redshifts. By cross-correlating this maps with galaxy catalogues we can improve our constraints on cosmological parameters and to understand better how neutral hydrogen populates different types of galaxies and haloes. Creating realistic mock intensity mapping catalogues is necessary to optimize the future analysis of data. I will present the mock neutral hydrogen catalogues that we are developing, using the Horizon run 4 simulations, to cross-correlate with mock galaxy catalogues from low redshift surveys and I will show the preliminary results from the first mock catalogues.

• 산경연구논집
• /
• 제12권11호
• /
• pp.9-16
• /
• 2021

Purpose: Carbon emissions have now become a major concern around the world, especially for the government and private sector. Unfortunately, in Indonesia, disclosure related to company carbon emissions is still done voluntarily. This research aims to provide empirical evidence on the effect of environmental performance, carbon emission disclosure, and carbon emission intensity on the cost of equity capital. Research design, data, and methodology: This research uses secondary data with a sample consisting of Indonesia companies that are sensitive to the environment and listed on the Indonesia Stock Exchange in 2017-2019. The analytical tool used in this research was multiple regression models. Result: The study found a carbon emission disclosure had a significant positive effect on the cost of equity capital. Carbon emission intensity and company size had a significant negative effect on the cost of equity capital. Meanwhile, environmental performance did not have a significant effect on the cost of equity capital. Conclusion: Therefore, the results of this research are expected to provide feedback to the company's stakeholders that environmental performance and carbon emissions are some of the points seen by investors in making investment decisions.

• 센서학회지
• /
• 제32권5호
• /
• pp.267-274
• /
• 2023

LiDAR, one of the most important sensing methods used in mobile robots and cars with assistive/autonomous driving functions, is used to locate surrounding obstacles or to build maps. For real-time path generation, the detection of potholes or puddles on the driving surface is crucial. To achieve this, we used the coordinates of the reflection points provided by LiDAR as well as the intensity information to classify water areas, which was achieved by applying a linear regression method to the intensity distribution. The rationale for using the LiDAR index as an input variable for linear regression is presented, and we demonstrated that it is not affected by errors in the distance measurement value. Because of LiDAR vertical scanning, if the reflective surface is not uniform, it is divided into different groups according to the intensity distribution, and a mathematical basis for this is presented. Through experiments in an outdoor driving area, we could distinguish between flat ground, potholes, and puddles, and kinematic analysis was performed to calculate the maximum width that could be crossed for a given vehicle body size and wheel radius.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 1999년도 추계학술발표회 초록집
• /
• pp.15-15
• /
• 1999

In chip plating, several parameters must be taken into consideration. Current density, solution concentration, pH, solution temperature, components volume, chip and media ratio, barrel geometrical shape were most likely found to have an effect to the process yields. The 3 types of barrels utilized in chip plating industry are the conventional rotating barrel. vibrational barrel (vibarrel), and the centrifugal type. Conventional rotating barrel is a close type and is commonly used. The components inside the barrel are circulated by the barrel's rotation at a horizontal axis. Process yield has known to have higher thickness deviation. The vibrational barrel is an open type which offers a wide exposure to electrolyte resulting to a stable thickness deviation. It rotates in a vertical axis coupled with multi-vibration action to facilitate mixed up and easy transportation of components, The centrifugal barrel has its plated work centrifugally compacted against the cathode ring for superior electrical contact with simultaneous rotary motion. This experiment has determined the effect of barrel vibration intensity to the plating thickness distribution. The procedures carried out in the experiment involved the overall plating process., cleaning, rinse, Nickel plating, Tin-Lead plating. Plating time was adjusted to meet the required specification. All other parameters were maintained constant. Two trials were performed to confirm the consistency of the result. The thickness data of the experiment conducted showed that the average mean value obtained from higher vibrational intensity is nearer to the standard mean. The distribution curve shown has a narrower specification limits and it has a reduced variation around the target value, Generally, intensity control in vi-barrel facilitates mixed up and easy transportation of components, However, it is desirable to maintain an optimum vibration intensity to prevent solution intrusion into the chips' internal electrode. A cathodic reaction can occur in the interface of the external and internal electrode. $2HD{\;}+{\;}e{\;}{\rightarrow}20H{\;}+{\;}H_2$ Hydrogen can penetrate into the body and create pressure which can cause cracks. At high intensity, the chip's motion becomes stronger, its contact between each other is delayed and so plating action is being controlled. However, the strong impact created by its collision can damage the external electrode's structure thereby resulting to bad plating condition. 1 lot of chip was divided into two equal partion. Each portion was loaded to the same barrel one after the other. Nickel plating and tin-lead plating was performed in the same station. Portion A maintained the normal barrel vibration intensity and portion B vibration intensity was increased two steps higher. All other parameters, current, solution condition were maintained constant. Generally, plating method find procedures were carried out in a best way to maintained the best plating condition. After plating, samples were taken out from each portion. molded and polished. Plating thickness was investigated for both. To check consistency of results. 2nd trial was done now using different lot of another characteristics.

• 유통과학연구
• /
• 제12권7호
• /
• pp.37-44
• /
• 2014

Purpose - This study reviews changes in the automobile export-import structure between Japan and USA through a trade related index, and focuses on analyzing comparative advantage based on time-series analysis of statistical data (2000, 2005, and 2012) by using the trade intensity index (TII), revealed comparative advantage index (RCA), and trade specialization index (TSI). Research design, data, and methodology - Japan and USA have mutually complementary economic phase characteristics. Therefore, this study aimed to understand each country's trade structure, to strengthen Japan-USA economic cooperation and aimed to examine trade drawbacks to analyze causes affecting trade and ways to improve it to facilitate its expansion. Results - These two economies have immense complementary potential and, further, significantly greater profits are assured from trade between them, as compared to any other integrated regional economic community. Conclusion - Economic cooperation between these two powers can provide opportunities for industry technology cooperation through partnerships against the backdrop of accelerating competition among industries, by identifying opportunities to secure stable resource suppliers and enlarge the export market.

• 한국안전학회지
• /
• 제19권2호
• /
• pp.34-40
• /
• 2004

This paper presents an analysis of SAR(Specific Absorption Rate) distribution characteristics in a head model using FDTD(Finite Difference Time Domain). In this study human head was modelled in four elements-layered structure, consisting of skin, fat, skull and brain. To calculate the electromagnetic fields wihtin the head model, FDTD method was used. In the FDTD method, the electromagnetic wave is analyzed by solving a Maxwell's equations repeatedly. For the calculation, distance between power source and head model increased by 10[m]. Power density and incident electric field intensity were calculated. Based on the incident electric field, the program which calaculated internal electric fields intensity and SAR calculation of the head model were developed. The results of developed program using FDTD were compared with those of a commericial programs, which showed the availability and usefulness of the suggested scheme in this paper.

• Journal of Welding and Joining
• /
• 제25권3호
• /
• pp.85-91
• /
• 2007

The conventional study on the laser surface transformation hardening has been carried out with a beam of the specified shape and uniform power-intensity distribution in order to ensure the uniformity of the hardening depth. Two types of beams - the circular gaussian beam and rectangular beam of the uniform power-intensity distribution were used in this study. we were supposed to optimize the process parameters and to compare the hardening results with two optics respectively. As a result, the hardness distribution of the hardened zone was similar in both cases and the hardened phase by the rectangular beam was denser than that by the circular gaussian beam.