• 한국정보처리학회논문지
• /
• 제5권4호
• /
• pp.1044-1047
• /
• 1998

최근 전자 산업의 발달로 전자부품이라든지 시스템의 신뢰성 확보를 위하여 많은 검사 시스템이 연구 개발되고 있는데, 특히 X-Ray 시스템은 인간의 시각이 미치지 못하는 물체의 내부 형상 검사가 가능하므로 연구가 활발히 진행중이다. 본 논문에서는 X-Ray 검사 시스템에서 X-Ray를 물체에 투과시켜 Image Intensifier에서 영상 이미지를 받을 때 입력 평면이 구면인 관계로 이미지의 왜곡이 발생하게 되는데, 이 왜곡을 보정하기 위하여 영상증배관의 구조를 수식적으로 모델링하고 관계식을 정리하여 실제 시스템에서 왜곡된 영상이 보정되는 것을 보임으로써 실제 산업 현장에서 보다 정확하고 안정적인 검사 시스템을 개발하는데 근간이 될 수 있도록 한다.

• 치과방사선
• /
• 제20권2호
• /
• pp.211-217
• /
• 1990

This study was undertaken to determine (1) the usefulness of chromium intensifier to improve the dignostic quality of light radiograph; (2) the effect of chromium intensifier on density, contrast; and (3) the effect of various chemical concentrations on density. The following results obtained: 1. CHROMIUM INTENSIFIER is useful for intensifying and improving the diagnostic quality of a light dental radiograph. 2. The degree of intensification can be controlled by varying bleaching time, repeating the processing, varying the proportions of the potassium bicarbonate and hydrochloric acid solutions. 3. The image produced is black and permanent. 4. The intensifier increases density and contrast.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제7권3호
• /
• pp.127-136
• /
• 2007

The accelerated life tests(ALTs) and degradation characteristics of image intensifier assembly(KIT-7) under low illuminance and high temperature were investigated. The accelerated life tests were carried out at $5{\times}10^5\;fc-40^{\circ}C,\;10{\times}10^5\;fc-40^{\circ}C,\;5{\times}10^5\;fc-50^{\circ}C,\;10{\times}10^5\;fc-50^{\circ}C$ and relationship related to illuminance and temperature was used as an accelerated life test model. An ALTA program[6] was used to calculate an acceleration factor and the test of life distribution fit, and estimate three parameters of an life test model. To sum up, MTTF 10,000 h at $5{\times}10^{-5}\;fc-40^{\circ}C$ of image intensifier assembly was certificated.

• 대한기계학회논문집A
• /
• 제34권9호
• /
• pp.1249-1255
• /
• 2010

초고압 시스템은 유압동력 발생장치, 충격압력 발생장치, 초고압부 오일 보충장치, 기동 및 제어반 등으로 일반적으로 구성된다. 유압동력 발생장치는 초고압 발생기에 유압원을 공급하고, 초고압 발생기에서는 공급되어진 유압원을 이용하여 초고압으로 압력을 증폭한다. 기동 및 제어반에서는 시스템을 운전하기 위한 전기모터, 밸브, 센서 등에 대한 제어 및 관찰을 하기 위해 사용된다. 본 연구에서는 초고압 압력을 발생시키기 위한 제어 방법을 서보밸브를 사용한 유량제어 방식에서 비례 릴리프 밸브를 사용한 압력제어 방법을 사용하여 연구하며, 초고압 압력 발생기의 압력을 가하는 주기와 유압동력 발생장치의 작동유의 온도 변화에 따라 충격압력을 발생시키는 성능이 변화하는 특성을 연구하는 것을 목적으로 한다.

• 전력전자학회논문지
• /
• 제14권2호
• /
• pp.128-133
• /
• 2009

본 논문에서는 영상증폭관 (image intensifier tube) 구동을 위한 초소형 경량의 고전압 전원장치의 개발에 대하여 기술하였다. 영상증폭관은 미세한 빛을 증폭하여 야간에도 물체를 식별할 수 있도록 하며, 휴대용 야간 투시경에 사용된다. 영상증폭관을 구동하기 위해서는 배터리 전원을 승압하여, 작은 사이즈에서 수천 볼트의 고전압을 발생하는 전원장치가 필요하다. 본 논문에서는 이를 위한 고전압 전원장치의 설계와 제작에 대해 설명하였으며, 시작품에 대한 실험을 통하여 성능을 검증하였다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제20권2호
• /
• pp.28-33
• /
• 1997

For the Evaluation of X-ray image intensifier, we measured radiation dose at input of I. I., brightness and fluorescence at output of I. I. by using X-ray exposure meter, optometer and fluorescence meter for the relative conversion factor. Especially, by using fluorescence meter, we could easily get relative conversion factor without having regulated machine by JIS. Since using, the quality of image intensifier is going down. Consequently, it needs continuous quality maintenance.

• 한국정밀공학회지
• /
• 제16권3호통권96호
• /
• pp.198-207
• /
• 1999

This paper presents an accurate algorithm for geometric calibration of X-ray imaging system. Calibration is a very important process for improving an imaging system performance. There has been a lot of previous works using linear camera modeling technique, where lens distortion is neglected and/or center of distortion is assumed to be known. Geometrical distortion of image intensifier, however, is very large and its center of distortion should be calculated. This paper presents a new calibration method to estimate the intensifier position and orientation, scale factor, distortion coefficient, magnification factor, and center of distortion using the least square method. We investigate the properties of the algorithm by computer simulation. Simulation results show that the parameters can be estimated accurately using the proposed algorithm.

• 한국안전학회지
• /
• 제25권5호
• /
• pp.7-14
• /
• 2010

Ultra high pressure system, which can be generally increased over 1,000bar, needs to have sealing mechanism to protect leakage and selection of the materials used in the intensifier. Components such as pressure vessel, hydraulic hose assembly, accumulator, hydraulic cylinder, hydraulic valve, pipe, etc., are tested under the impulse-pressure conditions. Components need to be tested under 1.5 to 3 times of rated pressure to check the tolerance even though rated pressure range of these components are not ultra high pressure. So, the ultra high pressure system needs to be equiped to test components. In this study, safety assessments of ultra high pressure system which are using failure analysis of components, changing the types of the control system, and finite element analysis with static condition, are investigated.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.686-691
• /
• 2000

Animation technique from the PIV database is particularly emphasized to give macroscopic and Quantitative description of complex flow fields. As an example, an experimental study was carried out investigate the fundamental (low characteristics of the freezer with the domestic refrigerator. Optimized cross correlation identification to obtain velocity vectors is implemented by direct calculation of correlation coefficients. Image intensifier CCD camera to cope with illumination problem is arranged for the accurate PIV measurement of large flow field. As a results, continuous pictures of the spatial distribution of the instantaneous and time-mean velocity distribution are displayed in real-time sense.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 1999년도 유체기계 연구개발 발표회 논문집
• /
• pp.264-271
• /
• 1999

The present experimental study is aimed to investigate the flow characteristics of the high-speed flow field within hot-water pump by PIV(Particle Image Velocimetry). As multi-point simultaneous velocity acquisition, 2-D PIV system based upon the two-frame gray-level cross correlation method is adopted using PC frame-grabber and simple video system. Gated image intensifier CCD Camera to cope with illumination problem is arranged for accurate PIV measurement of high-speed complex flow. The velocity vector distribution, velocity profile, and kinetic energy are represented quantitatively at the full-scale region for the deeper understanding of the unsteady flow characteristics in a pump.